ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

fleabag · 3 February 2019, 12:53 AM

Hi all , does anyone have anymore info about exchange of inserts at ROLEX HQ , & receiving one of the apparent new flat 4 inserts .

Sent from my iPhone using Tapatalk

padi56 · 3 February 2019, 02:23 AM

Yes there has been a few reports on forum when serviced by RSC original pointed 4 bezel font when returned had a flat four bezel font.

Jocke · 3 February 2019, 02:32 AM

When the owners get more profit than Rolex so is it easy for them to start produce new flat 4´s to destroy the market.

scooba · 3 February 2019, 03:08 AM

I have seen two but think they was only supplied along with a full service

Haywood M showed one he had fitted and I see one in person at Watches of Switzerland Brighton a few months ago .

I doubt very much you can just walk into St James and ask can I swap out my insert for a flat four . But you could try the I lost my bezel , Take the bezel off and tuck it away then go in with the watch and buy a insert and bezel under £200

037 · 3 February 2019, 03:49 AM

Here's Haywood's thread: https://www.rolexforums.com/showthread.php?t=628695

If Rolex starts installing flat fours as service replacements—even on watches with pointed inserts—RSCs will be overwhelmed with 16610LV service work.

Gaijin · 3 February 2019, 06:19 AM

If Rolex were to replace a non Flat 4 entitled LV with a Flat 4 Bezel that would make it inappropriate. I don’t want to go so far as to call it a “Franken” but I would not want it. How is it going to increase the value of say my “M” or “V” if they put a Flat 4 on it at service. Would be making my LV not time appropriate to me.

I did have the bezel on my M replaced a few years ago at service and it was a non flat 4. Perfect.

Gaijin · 3 February 2019, 06:21 AM

Double post.

3 February 2019, 12:53 AM	#1
fleabag "TRF" Member Join Date: Aug 2009 Location: UK Posts: 1,212	16610lv flat 4 insert exchange Hi all , does anyone have anymore info about exchange of inserts at ROLEX HQ , & receiving one of the apparent new flat 4 inserts . Sent from my iPhone using Tapatalk

3 February 2019, 02:23 AM	#2
padi56 "TRF" Life Patron Join Date: Jun 2005 Real Name: Peter Location: Llanfairpwllgwyng Watch: ing you. Posts: 53,019	Yes there has been a few reports on forum when serviced by RSC original pointed 4 bezel font when returned had a flat four bezel font. __________________ ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder

3 February 2019, 02:32 AM	#3
Jocke 2024 SubLV41 Pledge Member Join Date: Apr 2006 Real Name: Jocke Location: Sweden Watch: A dozen of Rolex's Posts: 22,541	When the owners get more profit than Rolex so is it easy for them to start produce new flat 4´s to destroy the market. __________________ This message is written in perfect swenglish. What is best a custom Rolex or a Rolex that is stuck in custom? Buy a professional camera and you´re a professional photographer, buy a flute and you own a flute.

3 February 2019, 03:08 AM	#4
scooba 2024 Pledge Member Join Date: Oct 2008 Location: Europe Watch: Anything Posts: 2,585	I have seen two but think they was only supplied along with a full service Haywood M showed one he had fitted and I see one in person at Watches of Switzerland Brighton a few months ago . I doubt very much you can just walk into St James and ask can I swap out my insert for a flat four . But you could try the I lost my bezel , Take the bezel off and tuck it away then go in with the watch and buy a insert and bezel under £200

3 February 2019, 03:49 AM	#5
037 2024 Pledge Member Join Date: Feb 2018 Location: USA Posts: 6,173	Here's Haywood's thread: https://www.rolexforums.com/showthread.php?t=628695 If Rolex starts installing flat fours as service replacements—even on watches with pointed inserts—RSCs will be overwhelmed with 16610LV service work.

3 February 2019, 06:19 AM	#6
Gaijin 2024 ROLEX DATEJUST41 Pledge Member Join Date: Feb 2007 Location: Japan Watch: ing your back. Posts: 16,179	If Rolex were to replace a non Flat 4 entitled LV with a Flat 4 Bezel that would make it inappropriate. I don’t want to go so far as to call it a “Franken” but I would not want it. How is it going to increase the value of say my “M” or “V” if they put a Flat 4 on it at service. Would be making my LV not time appropriate to me. I did have the bezel on my M replaced a few years ago at service and it was a non flat 4. Perfect.

3 February 2019, 06:21 AM	#7
Gaijin 2024 ROLEX DATEJUST41 Pledge Member Join Date: Feb 2007 Location: Japan Watch: ing your back. Posts: 16,179	Double post.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)