ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Tha Baron · 12 January 2018, 04:01 AM

What is the brand/name/model of the gold driver 2nd from the right?

Great thread, thanks OP

vladamir15 · 12 January 2018, 08:36 AM

Quote:

Originally Posted by mtgjr

I don't have personal experience, but I've always read that the Jubilee takes a smaller screwdriver.....1.3mm if I'm not mistaken. Compared to 1.6mm (actually 1.7mm if you can find it) for the Oyster.

+1
The jubilee is 1.3mm

mtgjr · 12 January 2018, 08:41 AM

Quote:

Originally Posted by vladamir15

+1
The jubilee is 1.3mm

I thought so. Thanks for confirming.

dysondiver · 12 January 2018, 08:52 AM

i use precision screwdrivers every day at work , huge differences , but you just seem to find a favourite couple that cover most things between them , i got mine from a specialist optical supplier , ill look for the brand tomorrow.

RXAPPP · 12 January 2018, 09:16 AM

Thanks

Juantxo · 12 January 2018, 09:39 AM

Quote:

Originally Posted by mtgjr

I don't have personal experience, but I've always read that the Jubilee takes a smaller screwdriver.....1.3mm if I'm not mistaken. Compared to 1.6mm (actually 1.7mm if you can find it) for the Oyster.

I have both bracelets on 36mm Datejusts and the screws are the same. The Rolex 2100 screwdriver works on both. The same works on the Oyster on the Submariner, Explorer, etc. The screws on the 34mm new Yachtmaster are smaller.

TickTockChuck · 12 January 2018, 10:08 AM

I've been curious about the alternatives, so thanks to all for posting! I've seen too many threads where usually the ADs mess up the screw heads. I think I would go for the Rolex 2100 if that is available any more. Here is a good thread with great close-ups of the 2100. Cheers!

https://www.rolexforums.com/showthread.php?t=156512

PS: See also this good related thread on Loctite use,

https://www.rolexforums.com/showthread.php?t=346701

bradyb · 12 January 2018, 11:43 AM

I always thought Bergeron would be the best but they really are garbage. My go-to screwdrivers for everything watch-related is Wiha. Excellent quality tips and just the right sizes and shapes for watches - inside and out.

Sarosh · 12 January 2018, 11:56 AM

Well that’s just rained on my parade lol. I ordered the Bergeon to adjust the bracelet on my watch rather than taking it to an AD!

Surely if I’m careful enough the screwdriver will suffice to adjust the watch for the first time? As highly unlikely I will be continuously adjusting links.....

Juantxo · 12 January 2018, 12:15 PM

For those asking for the gold colored screwdriver (that's all it has for id):

rossi46 · 12 January 2018, 05:12 PM

Quote:

Originally Posted by Juantxo

I have both bracelets on 36mm Datejusts and the screws are the same. The Rolex 2100 screwdriver works on both. The same works on the Oyster on the Submariner, Explorer, etc.

As far as I know, the super jubilee bracelet I just bought BNIB is what comes on 36mm Datejusts. Someone please correct me if I'm wrong.

There is no way the screws accept a 1.6mm driver. If I had micro photography capability I'd show a picture as proof.

Maybe there are different versions of the jubilee bracelet, but for the most modern super jubilee used on 6-digit DJs there's no way you can use the same screwdriver as on a 6-digit Submariner Oyster bracelet, for example.

What is the size of the Rolex 2100 screwdriver?

mtgjr · 12 January 2018, 11:36 PM

Quote:

Originally Posted by rossi46

What is the size of the Rolex 2100 screwdriver?

1.7mm. That screwdriver came with the Sea Dweller for a period of time. Thus, was intended to fit the Oyster screws.

vladamir15 · 13 January 2018, 01:01 AM

Quote:

Originally Posted by rossi46

As far as I know, the super jubilee bracelet I just bought BNIB is what comes on 36mm Datejusts. Someone please correct me if I'm wrong.

There is no way the screws accept a 1.6mm driver. If I had micro photography capability I'd show a picture as proof.

Maybe there are different versions of the jubilee bracelet, but for the most modern super jubilee used on 6-digit DJs there's no way you can use the same screwdriver as on a 6-digit Submariner Oyster bracelet, for example.

What is the size of the Rolex 2100 screwdriver?

+1 you are correct a jubilee bracelet for a datejust does not take a 1.6mm screwdriver, only 1.3mm (1.2mm would suffice). I can visually tell the difference in addition to calling Rolex RSC in Dallas and checking with my local AD. Most Oyster Bracelets take 1.6mm. but the super jubilee takes 1.3mm. The Rolex 2100 Screwdriver is appox. 1.7mm, which is why it has the best fit for Rolex bracelets. I was going to try to get the 2100, but with jubilee bracelets, it would be useless. I am just going to get two hortec screws in 1.6mm and 1.3mm from Ofrei, $20 each.

Peter99 · 13 January 2018, 01:05 AM

Quote:

Originally Posted by EddyG

Any sources to obtain a Rolex 2100 tool?

Ask an AD to order you one.
But please note, my local AD was not aware the the 2100 Rolex Screwdiver was available to the public.
I insisted he contact Rolex UK. He did, he ordered me one on receipt of my £21.00.(about)
Sounds expensive but worth it. It is small, obviating the possible risk of stripping a thread. It fits the slot perfectly.

Red65 · 13 January 2018, 12:02 PM

Are there knock offs that are sold, as in some of the ones listed on fleabay? It appears they have both the gold one mentioned in this thread, only green and the 2100s.

Juantxo · 9 July 2019, 11:56 PM

Bumping it as some are inquiring about screw drivers.

Gomler · 10 July 2019, 12:44 AM

Horotec 1.8 for me...
Once the tip length has been taken back it fits the slot like a glove with no play whatsoever.
Its also fairly easy and quick to take the 0.1 of the width to make a perfect 1.7mm driver.
Never had any deformation of the screw slots.

Driver blades are normally dressed for individual screws.

20190709_160210 by Sparks B, on Flickr

erne75 · 10 July 2019, 01:28 AM

I used my Panerai screw driver on my Explorer I bracelet and it worked great. It doesnt work on Tudor BB's oyster though. For that, I use my Bergeon 1.40mm and it did the job without any fuzz.

KBM · 10 July 2019, 01:47 AM

Panerai oem screwdriver for the win!

maxymax · 10 July 2019, 02:01 AM

Quote:

Originally Posted by kauebm

Panerai oem screwdriver for the win!

This. Worked perfect for both my BLNR and 126621 Oyster screws.

schoolboy · 4 April 2020, 02:43 AM

Quote:

Originally Posted by dysondiver

i use precision screwdrivers every day at work , huge differences , but you just seem to find a favourite couple that cover most things between them , i got mine from a specialist optical supplier , ill look for the brand tomorrow.

Hi Tom! Did you ever find the brand for the screwdrivers?

schoolboy · 4 April 2020, 02:46 AM

Quote:

Originally Posted by bradyb

I always thought Bergeron would be the best but they really are garbage. My go-to screwdrivers for everything watch-related is Wiha. Excellent quality tips and just the right sizes and shapes for watches - inside and out.

Hey Brady, thanks for sharing this info. I found a Wiha screwdriver for my super jubilee bracelet.

Can I use the precision one?

12 January 2018, 11:56 AM	#39
Sarosh "TRF" Member Join Date: Jul 2017 Location: London Watch: BLNR Posts: 2,222	Well that’s just rained on my parade lol. I ordered the Bergeon to adjust the bracelet on my watch rather than taking it to an AD! Surely if I’m careful enough the screwdriver will suffice to adjust the watch for the first time? As highly unlikely I will be continuously adjusting links..... __________________ ----- “It’s a watch, it tells time. Not much else”

12 January 2018, 12:15 PM	#40
Juantxo Banned Join Date: May 2016 Location: Utopia Posts: 2,101	For those asking for the gold colored screwdriver (that's all it has for id): Attached Images

10 July 2019, 01:28 AM	#48
erne75 "TRF" Member Join Date: Jul 2018 Location: FL Watch: 16613LB Posts: 164	I used my Panerai screw driver on my Explorer I bracelet and it worked great. It doesnt work on Tudor BB's oyster though. For that, I use my Bergeon 1.40mm and it did the job without any fuzz. __________________ Code: ♛116710LN ♛16613LB ♛214270 ♛116400 ♛16600 Ω166.0086 Ω311.30.42.30.01.005 PAM00564 79230R 79730 R135 └┼┼┤ Save the manuals! 246

12 January 2018, 04:01 AM	#31
Tha Baron "TRF" Member Join Date: Feb 2014 Location: Middle West Posts: 1,083	What is the brand/name/model of the gold driver 2nd from the right? Great thread, thanks OP

12 January 2018, 08:52 AM	#34
dysondiver "TRF" Member Join Date: Jul 2010 Real Name: tom Location: northern ireland Watch: my fins Posts: 10,062	i use precision screwdrivers every day at work , huge differences , but you just seem to find a favourite couple that cover most things between them , i got mine from a specialist optical supplier , ill look for the brand tomorrow.

12 January 2018, 09:16 AM	#35
RXAPPP "TRF" Member Join Date: Nov 2012 Location: Blue Planet Watch: 5 Posts: 1,201	Thanks

12 January 2018, 10:08 AM	#37
TickTockChuck "TRF" Member Join Date: Aug 2016 Real Name: Chuck Location: Canada Watch: Rolex 116610LV Posts: 2,304	I've been curious about the alternatives, so thanks to all for posting! I've seen too many threads where usually the ADs mess up the screw heads. I think I would go for the Rolex 2100 if that is available any more. Here is a good thread with great close-ups of the 2100. Cheers! https://www.rolexforums.com/showthread.php?t=156512 PS: See also this good related thread on Loctite use, https://www.rolexforums.com/showthread.php?t=346701

12 January 2018, 11:43 AM	#38
bradyb "TRF" Member Join Date: May 2010 Real Name: Brady Location: Austin, TX Watch: GMT Posts: 985	I always thought Bergeron would be the best but they really are garbage. My go-to screwdrivers for everything watch-related is Wiha. Excellent quality tips and just the right sizes and shapes for watches - inside and out.

13 January 2018, 12:02 PM	#45
Red65 "TRF" Member Join Date: Sep 2017 Location: CA Posts: 3	Are there knock offs that are sold, as in some of the ones listed on fleabay? It appears they have both the gold one mentioned in this thread, only green and the 2100s.

9 July 2019, 11:56 PM	#46
Juantxo Banned Join Date: May 2016 Location: Utopia Posts: 2,101	Bumping it as some are inquiring about screw drivers.

10 July 2019, 12:44 AM	#47
Gomler "TRF" Member Join Date: Oct 2016 Real Name: Mark Location: Manchester Posts: 104	Horotec 1.8 for me... Once the tip length has been taken back it fits the slot like a glove with no play whatsoever. Its also fairly easy and quick to take the 0.1 of the width to make a perfect 1.7mm driver. Never had any deformation of the screw slots. Driver blades are normally dressed for individual screws. 20190709_160210 by Sparks B, on Flickr

10 July 2019, 01:47 AM	#49
KBM 2025 Pledge Member Join Date: Jan 2010 Real Name: K. Location: 780 Posts: 10,478	Panerai oem screwdriver for the win!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)