ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

inspires · 7 January 2010, 06:47 PM

Quote:

Originally Posted by AVS

Eric, I thought you would be trading the 1675 for your "grail"! Milgauss is a great choice, and I think we have similar tastes. :)

I will be flying out to Shanghai later on tonight, and won't be back till early next week. So if I do miss this GTG, not to worry.. always a next time!

Jon

I'd have to trade more than my 1675 for my grail.

For my Rolex grail - think RED

Perhaps we'll make the GTG sometime next week. This Saturday is probably too short notice

allenlau2000 · 7 January 2010, 06:58 PM

HI Eric,

Can do Sat but will need to be back in Wan Chai 8ish.. So not sure if that fits the schedule... Late afternoon works better for me... Lemme know..

inspires · 7 January 2010, 07:02 PM

Quote:

Originally Posted by allenlau2000

HI Eric,

Can do Sat but will need to be back in Wan Chai 8ish.. So not sure if that fits the schedule... Late afternoon works better for me... Lemme know..

Late afternoon works for me too. I was actually thinking drinks around 10 in Central, which do you prefer?

allenlau2000 · 7 January 2010, 08:05 PM

eric, just pm'd you...

J.Wong · 11 January 2010, 02:56 PM

Hey guys, need some help here. I just picked up a Vintage piece and it needs to be re-serviced, tear down and re oil some components. I would bring it to RSC HK but afraid that they will replace some of the parts. Do you guys have specific watch makers for these services??

Thanks
Jon

inspires · 13 January 2010, 12:22 AM

Quote:

Originally Posted by AVS

Hey guys, need some help here. I just picked up a Vintage piece and it needs to be re-serviced, tear down and re oil some components. I would bring it to RSC HK but afraid that they will replace some of the parts. Do you guys have specific watch makers for these services??

Thanks
Jon

Hi Jon,

I brought my 5.1 million serial 1675 to RSC and they did a find job with it, as long as you tell them which parts not to touch. Also, depending on how old your vintage piece is and if you have papers, it might take some time.

I didn't have the papers on my 1675 and it took them 3 weeks to verify the serial number before they would work on it. After that, it took 2 weeks. I told them specifically not to touch the hands or the dial, which they didn't.

The did replace the plexi and crown as that was the only way it would pass the water pressure test.

The total on my bill was HKD $5700.

Cheers,

Eric

landeriv · 27 February 2010, 07:50 PM

Hi guys! I'm off to Hong Kong next weekend to buy myself an Explorer II (black). Can anyone recommend a good AD? I've called a few in Central but none are willing to give me more than 8% discount. Thanks!

Carlos98326194 · 27 February 2010, 11:57 PM

You should try to pm Eric.

inspires · 11 August 2010, 03:40 PM

Reviving this thread - looking for more members from HK!!!

EE33 · 16 August 2010, 02:44 PM

I travel to HK 2 to 3 times a year en route to China, love the place and normally stay on the Kowloon side.
Planning to return to HK/China at the end of the year/early January and would be awesome to catchup with the HK TRF members

Religiously hit the racetrack (Happy Valley or Sha tin) on the Sunday afternoon.

inspires · 22 August 2010, 10:33 PM

Quote:

Originally Posted by EE33

I travel to HK 2 to 3 times a year en route to China, love the place and normally stay on the Kowloon side.
Planning to return to HK/China at the end of the year/early January and would be awesome to catchup with the HK TRF members

Religiously hit the racetrack (Happy Valley or Sha tin) on the Sunday afternoon.

Hi Des,

Drop me PM when you've firmed up the dates for your next trip and we'll try to arrange a GTG when you're in town.

Cheers,

Eric

egzbuen · 22 August 2010, 11:13 PM

Hey guys, I was just there two months ago

EE33 · 23 August 2010, 11:18 AM

Quote:

Originally Posted by inspires

Hi Des,

Drop me PM when you've firmed up the dates for your next trip and we'll try to arrange a GTG when you're in town.

Cheers,

Eric

Thanks Eric, will certainly do that!

Aspirin · 8 September 2010, 02:10 AM

+ one more here, I'm originally come from Hong Kong, but working right here in China all the time.

nowzen · 8 September 2010, 01:46 PM

Quote:

Originally Posted by landeriv

Hi guys! I'm off to Hong Kong next weekend to buy myself an Explorer II (black). Can anyone recommend a good AD? I've called a few in Central but none are willing to give me more than 8% discount. Thanks!

I don't know of any AD's that will go more than 8%.
There are certainly grey market dealers that will go to 15%.

nowzen · 13 September 2010, 02:57 PM

Quote:

Originally Posted by AVS

Hey guys, need some help here. I just picked up a Vintage piece and it needs to be re-serviced, tear down and re oil some components. I would bring it to RSC HK but afraid that they will replace some of the parts. Do you guys have specific watch makers for these services??

Thanks
Jon

Greetings HongKongers!

To reiterate AVS's post... can anybody recommend a watchmaker to service (NOT RSC)?

I have a mini-sub I'd like to get polished up to sell. thanx.

nowzen · 14 September 2010, 03:18 PM

I posted a thread on preowned stores in Hong Kong here:
http://www.rolexforums.com/showthread.php?t=143699

Please check it out and add any recommendations. Thanx.

Flyjet601 · 21 September 2010, 02:59 PM

Hey

A bit late checking in but Im here too

Been here nearly 5 years

RolexWatcher · 15 January 2011, 09:18 PM

Quote:

Originally Posted by inspires

Reviving this thread - looking for more members from HK!!!

Hi inspires,

Wonder if I can be a member as well? :)

I am a new member here but I was previously based in Hong Kong for a few years but now based in London. Was actually in Hong Kong on business/holiday last year but I wasn't really into watches or Rolex back then. Now, I am planning to buy a Rolex this year. How things change!

Anyways, if all goes well, I might be headed back to Hong Kong for a while.

nowzen · 15 January 2011, 10:52 PM

Quote:

Originally Posted by nowzen

Greetings HongKongers!

To reiterate AVS's post... can anybody recommend a watchmaker to service (NOT RSC)?

I have a mini-sub I'd like to get polished up to sell. thanx.

...anybody?

jamesh · 17 January 2011, 01:13 AM

Another Hong Kong member here

qualizon · 18 January 2011, 05:21 AM

I'm originally from HK and now working in Chicago.

But I come back every CNY :-)

Poohsan · 23 January 2011, 04:07 PM

Quote:

Originally Posted by nowzen

...anybody?

Try talking to Mr. Wing Man at Chronomert Vintage Timepieces.

The shops address is:
Shop B112, Basement One,
Holiday Inn Golden Mile Hotel,
No 50 Mathan Road, TST,HK
Phone: (852) 2312-2062

Previously I had asked him the same question and he provided me with the contact information of the person he uses to polish his watches.

I think this is the contact's information but I'm not 100% sure so it would be best to ask Mr. Wing Man.

Mr. Fu Kwok Keung
Keung Kee Antique Watch & Lighter
1G, @b, G/F, Man Yuen Building.
Ferry Street, Jordan, Kowloon, KH
Phone (852) 2332-8813

qualizon · 26 January 2011, 05:17 AM

usually how much does it cost to polish a watch with light scratches in HK? will they be able to polish the watch right on the spot?

paulshih · 26 January 2011, 10:14 AM

a frequent HK visitor! working in dongguan, china!

Stabes · 4 March 2011, 02:17 PM

Lived in the UK up until five years ago... Love Hong Kong my new home!

nowzen · 5 March 2011, 03:24 AM

Quote:

Originally Posted by Poohsan

Try talking to Mr. Wing Man at Chronomert Vintage Timepieces.

The shops address is:
Shop B112, Basement One,
Holiday Inn Golden Mile Hotel,
No 50 Mathan Road, TST,HK
Phone: (852) 2312-2062

Previously I had asked him the same question and he provided me with the contact information of the person he uses to polish his watches.

I think this is the contact's information but I'm not 100% sure so it would be best to ask Mr. Wing Man.

Mr. Fu Kwok Keung
Keung Kee Antique Watch & Lighter
1G, @b, G/F, Man Yuen Building.
Ferry Street, Jordan, Kowloon, KH
Phone (852) 2332-8813

Thanx! Will definitely give them a try.

conkers · 12 February 2013, 02:58 PM

Reviving the thread, another HK member here!

Lamkyle · 15 February 2013, 06:22 PM

Newbie from hk!

Skye777 · 13 March 2013, 01:18 AM

Not from Hk but I go there at least 5x a year for food tripping and as a transit point to China. I was there before the Chinese new year and will be back on March 26 to March 31 for vacation and will back again on April 5 to see the watch show before flying to Shanghai in route to Yiwu.

11 January 2010, 02:56 PM	#65
J.Wong "TRF" Member Join Date: Jul 2005 Real Name: Jon Location: Hong Kong Watch: Tudor/Rolex Divers Posts: 244	Hey guys, need some help here. I just picked up a Vintage piece and it needs to be re-serviced, tear down and re oil some components. I would bring it to RSC HK but afraid that they will replace some of the parts. Do you guys have specific watch makers for these services?? Thanks Jon __________________ Member #88 Instagram : @jwlife37

27 February 2010, 11:57 PM	#68
Carlos98326194 "TRF" Member Join Date: Jul 2009 Real Name: Carlos Location: UK Watch: ing YOU! Posts: 1,121	You should try to pm Eric. __________________ 16610 116400GV 116520W 00112 116710LN 16610LV 00292 116520B

11 August 2010, 03:40 PM	#69
inspires "TRF" Member Join Date: Aug 2008 Real Name: Eric Location: Hong Kong Watch: 1665 Posts: 1,495	Reviving this thread - looking for more members from HK!!! __________________ _____________ All GREEN

22 August 2010, 11:13 PM	#72
egzbuen "TRF" Member Join Date: Nov 2007 Location: Manila Posts: 1,177	Hey guys, I was just there two months ago __________________ 18083 & 16750 16234 & 16233 16610 & 16800 3717-01 & 104 & 312 Nav B-Uhr

21 September 2010, 02:59 PM	#78
Flyjet601 "TRF" Member Join Date: Sep 2006 Location: Hong Kong Watch: All of them Posts: 2,789	Hey A bit late checking in but Im here too Been here nearly 5 years __________________ I used to be indecisive, now I'm not sure

7 January 2010, 06:58 PM	#62
allenlau2000 "TRF" Member Join Date: Dec 2009 Location: Hong Kong Watch: 16600, 116710LN Posts: 29	HI Eric, Can do Sat but will need to be back in Wan Chai 8ish.. So not sure if that fits the schedule... Late afternoon works better for me... Lemme know..

7 January 2010, 08:05 PM	#64
allenlau2000 "TRF" Member Join Date: Dec 2009 Location: Hong Kong Watch: 16600, 116710LN Posts: 29	eric, just pm'd you...

27 February 2010, 07:50 PM	#67
landeriv "TRF" Member Join Date: Feb 2010 Location: shanghai Posts: 67	Hi guys! I'm off to Hong Kong next weekend to buy myself an Explorer II (black). Can anyone recommend a good AD? I've called a few in Central but none are willing to give me more than 8% discount. Thanks!

16 August 2010, 02:44 PM	#70
EE33 "TRF" Member Join Date: Feb 2010 Real Name: Des Location: China Watch: 16613 16710 116520 Posts: 2,841	I travel to HK 2 to 3 times a year en route to China, love the place and normally stay on the Kowloon side. Planning to return to HK/China at the end of the year/early January and would be awesome to catchup with the HK TRF members Religiously hit the racetrack (Happy Valley or Sha tin) on the Sunday afternoon.

8 September 2010, 02:10 AM	#74
Aspirin "TRF" Member Join Date: Aug 2010 Location: at home Posts: 1,330	+ one more here, I'm originally come from Hong Kong, but working right here in China all the time.

14 September 2010, 03:18 PM	#77
nowzen "TRF" Member Join Date: Mar 2010 Location: Hong Kong Posts: 741	I posted a thread on preowned stores in Hong Kong here: http://www.rolexforums.com/showthread.php?t=143699 Please check it out and add any recommendations. Thanx.

17 January 2011, 01:13 AM	#81
jamesh "TRF" Member Join Date: Apr 2008 Location: Hong Kong Posts: 219	Another Hong Kong member here

18 January 2011, 05:21 AM	#82
qualizon "TRF" Member Join Date: Nov 2010 Real Name: Hammond Location: Chicago Watch: SubLV,P312,SpeedyP Posts: 156	I'm originally from HK and now working in Chicago. But I come back every CNY :-)

26 January 2011, 05:17 AM	#84
qualizon "TRF" Member Join Date: Nov 2010 Real Name: Hammond Location: Chicago Watch: SubLV,P312,SpeedyP Posts: 156	usually how much does it cost to polish a watch with light scratches in HK? will they be able to polish the watch right on the spot?

26 January 2011, 10:14 AM	#85
paulshih "TRF" Member Join Date: Jun 2010 Real Name: Paul Location: Taipei, Taiwan Watch: PP5711 BLUE Posts: 49	a frequent HK visitor! working in dongguan, china!

4 March 2011, 02:17 PM	#86
Stabes "TRF" Member Join Date: Jan 2009 Real Name: Jus Location: Hong Kong Watch: 16610 LV Posts: 17	Lived in the UK up until five years ago... Love Hong Kong my new home!

12 February 2013, 02:58 PM	#88
conkers "TRF" Member Join Date: Feb 2013 Real Name: Roger Location: Hong Kong Watch: Too many! Posts: 6,132	Reviving the thread, another HK member here!

15 February 2013, 06:22 PM	#89
Lamkyle "TRF" Member Join Date: Feb 2013 Real Name: Kyle Location: HK Watch: Those from my wife Posts: 669	Newbie from hk!

13 March 2013, 01:18 AM	#90
Skye777 "TRF" Member Join Date: Jan 2013 Real Name: Eric Location: Philippines Posts: 3	Not from Hk but I go there at least 5x a year for food tripping and as a transit point to China. I was there before the Chinese new year and will be back on March 26 to March 31 for vacation and will back again on April 5 to see the watch show before flying to Shanghai in route to Yiwu.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)