ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
13 August 2016, 02:20 AM | #1 |
"TRF" Member
Join Date: Jul 2016
Real Name: Ed
Location: USA
Watch: Rolex
Posts: 27
|
Rolex 3186 behavior
Hello Gentlemen! I have a pretty specific question about Cal 3186 and hope that someone with experience with this movement can answer it. I have to disclose that I am a hobbyist watchmaker with a fair amount of experience, but mostly working with inexpensive vintage watches and some contemporary ETA. The only Rolex a serviced in and out was Cal 1570. I have been inside 3135 a few times, but only for a quick adjustment. Thus - I have very little experience with Rolex movements.
Anyway, I just bought an "almost new" GMT Master II with 3186. The watch was originally sold six months ago and only warn a few times, so it's practically new. I have this watch for 3-4 days it runs perfectly with only 4 or 5 seconds positional error in four main positions. When fully would it shows an amplitude around 300-310. But within a couple of minutes amplitude drops to 270-280. The amplitude is stable from there on. From my experience with ETA once the fully wound movement settles amplitude is usually 290-300. But on this Rolex it's somewhat lower. I would say almost on the border of normal. Unless Rolex has different specifications for this caliber. Does anyone have an opinion on this matter? Thanks. P.S. I assume lift angle is 52' for this movement. If not, it throws all my numbers out of the window |
13 August 2016, 04:12 AM | #2 |
TechXpert
Join Date: May 2012
Location: Earth
Posts: 23,590
|
I've seen 31 calibers go as low as 260 and it's never really a problem for timekeeping. I'd say if it's at least 270 you have nothing to worry about.
It shouldn't go under 200degrees amplitude after 24hrs in any position. |
14 August 2016, 01:17 PM | #3 |
"TRF" Member
Join Date: Jul 2016
Real Name: Ed
Location: USA
Watch: Rolex
Posts: 27
|
Thank you for your insight!
|
14 August 2016, 05:48 PM | #4 |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 52,887
|
Have to agree 100% 270 will be fine
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
15 August 2016, 06:39 AM | #5 |
"TRF" Member
Join Date: Aug 2010
Real Name: Thomas
Location: London, England
Watch: rolex,seiko,Omega
Posts: 189
|
270 degrees is ideal, i wouldn't worry
|
15 August 2016, 03:03 PM | #6 |
"TRF" Member
Join Date: Jul 2016
Real Name: Ed
Location: USA
Watch: Rolex
Posts: 27
|
Thank you!
First of all, gentlemen, thank you for your replies. Your time to read my post and reply to it is appreciated. Secondly, perhaps my post shows more worries then really exist. I am not overly concerned with a "lower" amplitude. I understand it's within norm.
I guess what I was seeking is an opinion of watchmakers with experience servicing calibers 31XX if it's common for these calibers to ran in 270-280 degrees neighborhood when fully wound. That's all. Either way the watch runs perfect in all aspects: excellent timekeeping and minimal positional error. One of the best movements I ever seen. |
16 August 2016, 01:44 AM | #7 | |
TechXpert
Join Date: May 2012
Location: Earth
Posts: 23,590
|
Quote:
|
|
29 September 2016, 09:50 AM | #8 |
"TRF" Member
Join Date: Jun 2013
Location: Oregon
Watch: own 18 watches
Posts: 117
|
Today I was in visiting our watchmaker, a Rolex trained tech, and CMW21 credentialed. I retired in June after 36 years at this AD. I have a GMT II BLNR. He had a 3186 movement on his workbench and said this is the third GMT II that he had to replace a cam and a gear in the setting mechanism of the hour hand. He said it is a flaw in the design, he showed me where is is breaking in the same spot and Rolex has a new design that he is replacing the older one with. Mine is new enough (April) that it will have the new one, but the one he was repairing we sold in 2014, we are doing it in house at no cost to the customer. Faster than sending it to Rolex and better customer service. The symptom is that the hour hand won't set. Anyone else identified this problem?
|
29 September 2016, 10:02 AM | #9 |
"TRF" Member
Join Date: Jul 2016
Real Name: Ed
Location: USA
Watch: Rolex
Posts: 27
|
Mine runs fine so far, but it's too new to tell, it's from April of 2016. In fact my first concern about "lower amplitude" went away too!
As I wore the watch for some time amplitude averages around 290' now, when fully would. Yes, it goes down to around 275' overnight, but it's normal. My initial concern was that 275' may be a bit too low when watch was warn all day, but I guess it took some time to brake in. Now it's higher right off the wrist. One of the most accurate movements I've seen and looks great too. |
30 September 2016, 11:22 AM | #10 | |
"TRF" Member
Join Date: Dec 2012
Real Name: Adrian
Location: Dallas
Watch: 218235 BronzeWaves
Posts: 760
|
Quote:
As long as the pendant positions are above 200 degrees after 24 hours as stated above, you should be in good shape Sent from my iPhone using Tapatalk
__________________
Sea-Dweller 16600 Day-Date II 218235 Cellinum 5240/6 Speedmaster 125 |
|
1 October 2016, 01:34 AM | #11 | |
TechXpert
Join Date: May 2012
Location: Earth
Posts: 23,590
|
Quote:
|
|
1 October 2016, 01:36 AM | #12 | |
TechXpert
Join Date: May 2012
Location: Earth
Posts: 23,590
|
Quote:
|
|
1 October 2016, 04:40 AM | #13 | |
"TRF" Member
Join Date: Apr 2013
Real Name: Dave
Location: NC
Watch: GMTIIc
Posts: 8
|
Quote:
|
|
1 October 2016, 06:22 AM | #14 |
"TRF" Member
Join Date: Jun 2013
Location: Oregon
Watch: own 18 watches
Posts: 117
|
They will replace the parts with the new "improved" in this service.
Sent from my iPad using Tapatalk |
2 October 2016, 07:21 AM | #15 |
"TRF" Member
Join Date: Mar 2010
Location: Netherlands
Posts: 142
|
Hi,
Max amplitude is 300 degrees. If higher, Rolex standard tell you you have to replace the standard mainspring to a weaker mainspring to resolve the too high amplitude. Coming back to your watch. When worn and if you move your arm enough the amplitude will be around 20 degrees above what you measured. This is because the autowinder will wind the spring just to the edge it will slip. So if you have 270 now, with an additional 20 degrees you ar close to the maximum amplitude accoring to the Rolex standards. So all well. Test the amplitude after 24 hours (let the mainspring down 4.8 revolutions of the arbor of the mainspring). As stated above,should be > 200 degrees with crown down, again according to the Rolex standards for this movement. Br RonP |
20 October 2016, 08:59 AM | #16 |
"TRF" Member
Join Date: Jun 2013
Location: Oregon
Watch: own 18 watches
Posts: 117
|
Timing machine data
This is a copy of the printout from our Witschi timing machine of my GMT-II BLNR. Witschi is the machine required by Rolex USA.
Column 1 Number of seconds/day in the 5 positions. Top is face up, second is face down, third crown down, forth crown left, fifth crown up. Column 2 Amplitude, or the rotation of the balance wheel. Should be 220 degrees or more. Some models are 200 or more. Column 3 Number of millisecond variation of the pallet fork from side to side (tick-tock) 0 would be ideal but usually not adjusted unless it is 10 off. Right side of the vertical line (Actually the top line) D is the maximum variation of the 5 positions (7 seconds, in my case +5 to -2) Max variation in amplitude 21 degrees, 0.2 maximum pallet fork deviation. X is the average gain per day in seconds in the 5 positions. Average Amplitude, 0.2 is the pallet fork variation again. Xv is the stats in the v vertical position Xh is the stats in the h horizontal position Dvh is the variation in the vertical and horizontal positions Dv is the variation is the vertical position My watch on my wrist gains 0.5 seconds per day. So this data is a guideline but not the final word while the watch is worn. We have adjusted the watch to our customer, however if everyone wanted it timed to their individual needs, you wouldn't have enough time to do all of the other repairs. |
20 October 2016, 03:28 PM | #17 |
"TRF" Member
Join Date: Jul 2016
Real Name: Ed
Location: USA
Watch: Rolex
Posts: 27
|
Thank you, guys! Great information to have.
|
10 October 2021, 08:40 PM | #18 |
"TRF" Member
Join Date: Feb 2014
Location: Shanghai, China
Posts: 11
|
doesn't rolex provie any "data sheet" or "service sheet"? after so many years, all over the world, there got to be something.
any one understands how timegraph works, know it "listens" to the 1st and 3rd of the "5 ticks". Simply put, "lift angle" & “beat” supposed to be a given data. cal.3186 is a 28800 machine. that's all i can get from open sources. |
12 October 2021, 08:56 AM | #19 | |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Aug 2020
Real Name: Stan Cooper
Location: Sonoma County, CA
Watch: GMT-Master II
Posts: 2,852
|
Quote:
https://www.ebay.com/itm/304148105683
__________________
♛16710 GMT-Master II, ♛1915 Rolex WW1 Trench Watch, Zelos Thresher 500m GMT Meteorite, Zelos Swordfish 40 200m Ti Blood Moon Meteorite, Hamilton Pilot Chronograph, Ball Roadmaster Pilot GMT COSC Chronometer, Zelos Mako 300M True GMT Meteorite, Seiko SSC813 quartz solar powered chronograph It's weird being the same age as old people. - Stan |
|
20 October 2021, 06:59 AM | #20 |
"TRF" Member
Join Date: Feb 2009
Location: usa
Watch: 16610w 16710m stic
Posts: 23
|
ref 3186..
I recently had my GMT Master 2 ref 3186 coke stick dial serviced by a local dealer. My GMT was suffering from the same problem, the hr hand would not advance.
Here,s the thing, they charged me for a full service $800, i thought this would have been covered by Rolex, but apparently they did not for my GMT. respectfully dazed and confused.. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.