![]() |
ROLEXROLEXROLEXROLEXROLEXROLEX
ROLEXROLEXROLEXROLEXROLEXROLEX
![]() |
#1 |
2024 Pledge Member
Join Date: Jun 2016
Location: USA
Posts: 868
|
Omega 2627 Movement
Recently obtained an Omega powered by the 2627 movement, which I think is based on the 2500, based on the ETA 2892-A2. It wasn't running, I had it serviced, I am quite inactive, and it died on my wrist. It ran maybe 60 hours. I have experienced this, but rarely and wouldn't think it would happen with a fine watch like an Omega. Does this seem possible, or should it be winding automatically even with limited activity? Thought I'd check in here... thank you!
|
![]() |
![]() |
![]() |
#2 |
2024 Pledge Member
Join Date: Feb 2009
Real Name: Tony
Location: Orchard Park, NY
Watch: Idiot Savant
Posts: 3,331
|
I have a couple of thoughts:
1) I'm guessing the answer is yes, but can we assume you wound the movement with plenty of twists of the crown before putting it on your wrist and observing the 60 hours? By plenty of twists, I'm thinking that watch needs ~30 twists in order to get the spring mostly wound. 2) Who serviced it? The first generation of Co-Axial movements went through some teething trouble, and it's possible your watch should have had some corrections or upgrades earlier in its life that it somehow never received. Also, I believe the early Co-Axial escapements depend on precise amounts of specific lubricant in order to operate properly. I don't think there are a lot of watchmakers out there with training, experience, and access to the info and materials necessary to make an early Co-Axial movement perform as intended. There are a few independent service centers in the USA qualified to overhaul that movement. Nesbit's Fine Watch Service in Seattle is the one I use and recommend. |
![]() |
![]() |
![]() |
#3 | |
2024 Pledge Member
Join Date: Jun 2016
Location: USA
Posts: 868
|
Thank You!
Quote:
It's a long story, but I went with a guy I trust. It has a power reserve sub dial, it was wound to the max and was off by a second for the 48 hours or so that it ran. So that part of the service was addressed. I'm figuring out my next move... getting it to him to check it again is complicated here for many reasons at this time. Am I wrong to think this is not one of Omega's higher end movements? Funny, it may have been under warranty, but that would entail a whole big deal of shipping it and waiting... and I doubt the warranty is good now since I had it serviced. But I still wonder if it would work automatically if with a more active user. Many variables at play here... |
|
![]() |
![]() |
![]() |
#4 |
2024 Pledge Member
Join Date: Feb 2009
Real Name: Tony
Location: Orchard Park, NY
Watch: Idiot Savant
Posts: 3,331
|
The early Co-Axials are reputed to be highly sensitive. If the person who serviced it didn't have adequate experience specifically with early Co-Axial calibers, an Omega parts account, exactly the proper lubricants, supporting tech info, etc. then it's conceivable something was amiss that he couldn't have known about. I'm guessing if you trust him then he's very good, but these early Co-Axial movements are a different breed from what I hear.
|
![]() |
![]() |
![]() |
#5 | |
2024 Pledge Member
Join Date: Jun 2016
Location: USA
Posts: 868
|
Thanks Tony!
Quote:
|
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.