ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
26 January 2023, 08:36 AM | #1 |
"TRF" Member
Join Date: Jan 2023
Location: miami
Posts: 3
|
Approximate cost to restore bracelet at Rolliworks
Hi,
I just acquired a 1967 Rolex Submariner 5512. The watch itself is in great shape. However structurally, the bracelet is in rough shape. I know at minimum the bars between the links all need to be replaced (some are bent). Also the middle (interior) links have had quite a bit of friction over the years that has worn quite a bit of the steel away. This makes me presume it will also need some laser welding to add metal back to the links to make them strong again. Cosmetically, i have no interest in getting it polished, i want to keep it vintage looking. But i do want to make sure the bracelet is as strong as it can be since its a $25K watch and I don't want it ever falling off my wrist. I intend this to be my daily wear for the next several decades so its worth it to me to do it right Assuming it needs new bars and laser welding, can anyone give me a ballpark idea of what it could cost? I'm ok with maybe $500, but if its closer to $ 1500, I would need to budget for that and I may just look into getting a new oyster bracelet instead. Any feedback is appreciated, thanks! |
26 January 2023, 10:19 AM | #2 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,205
|
I could tell you what I have paid. Or you could do what I have always done, which was simply send them photos and ask for an estimate.
__________________
@oldwatchdan on IG |
26 January 2023, 11:00 AM | #3 |
TRF Moderator & 2024 SUBMARINER Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,445
|
I think that you will be happy with an estimate compared to replacing the bracelet.
You are likely out of luck when it comes to refinishing. It is very unlikely that the repairs can be done without tool and work marks, which will need to be brushed and hammered out. Only doing that to the repaired areas will make for a messed up looking product. I usually wear a 30 year old GMT Master. I would be embarrassed if it looked thrashed and not in good condition. It has some scratches and wear marks, but if I had bent links or springbars, I would have them repaired.
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
26 January 2023, 11:06 AM | #4 |
Banned
Join Date: Nov 2022
Location: United States
Posts: 153
|
Talk to Michael Hui at Rolliworks. He will ask for pics and then give you a quote. You will be around $1400 or so to rehab that bracelet. They do excellent work.
|
26 January 2023, 12:02 PM | #5 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,205
|
Interesting estimate. Not consistent with my recent experiences, but who knows, maybe Rolliworks has different prices for different customers. OP, this is why I suggested just contacting Michael yourself. You really have no idea whether the responses you get here are accurate, or which you should believe. To you, we are all just strangers on the internet.
Anyway, welcome to the forum, and perhaps someday you can post some photos of your watch.
__________________
@oldwatchdan on IG |
26 January 2023, 12:22 PM | #6 |
2024 Pledge Member
Join Date: Aug 2013
Location: The Empire State
Watch: Many
Posts: 3,453
|
Curious what was done for that price. He worked on a 7206 rivet bracelet of mine, including repairing two links, as well as tightening-up the stretch, and a very, very light polish for less than half that. It was about two years, so maybe prices have risen.
|
26 January 2023, 12:32 PM | #7 |
"TRF" Member
Join Date: Jan 2013
Location: USA
Posts: 1,099
|
He quoted me $3300 to tighten a platinum President bracelet.
|
26 January 2023, 01:25 PM | #8 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Jan 2019
Location: Valencia, CA
Watch: GMT Master 1675/3
Posts: 2,174
|
|
26 January 2023, 02:06 PM | #9 |
"TRF" Member
Join Date: Mar 2020
Location: USA
Posts: 795
|
You might consider just getting a new oyster if you'll be wearing this daily. I always found 93150 to be more comfortable and secure than 9315.
|
26 January 2023, 02:51 PM | #10 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: May 2008
Real Name: Matt
Location: Wine Country, Ca
Posts: 5,964
|
$1400 is what a gold bracelet will cost to be done. I had a 93150 rebuilt a couple years back and it was just over $400
__________________
TRF Member 11738 |
27 January 2023, 12:28 AM | #11 |
"TRF" Member
Join Date: Feb 2010
Location: South Florida
Posts: 3,433
|
I agree with this sentiment unless you really love the 9315 feel. Buying a 93150 you can use the same end pieces you have now as well so cost will be reasonable.
__________________
- Rolex Explorer - 214270 - Tudor Black Bay - 79230B - Tudor Chronograph - 79270P - Breitling Chronomat - 10th Anniv. - Huguenin Freres Speedmaster Prototype |
27 January 2023, 06:17 AM | #12 | |
"TRF" Member
Join Date: Jan 2023
Location: miami
Posts: 3
|
Quote:
|
|
27 January 2023, 06:44 AM | #13 |
"TRF" Member
Join Date: Jan 2023
Location: miami
Posts: 3
|
Thanks everyone for the advice. I'll be sure to send and email to Michael at Rolliworks with photos to get an estimate. I'm also looking into getting a new 93150 with new end-links. Does anyone know what a fair price is for that? Someone in the Rolex community told me to expect about $2000 for a new bracelet with end-links.
And since i forgot to add the best part, photos of the actual watch, here are a few. |
3 February 2023, 09:52 PM | #14 |
"TRF" Member
Join Date: Jun 2015
Location: Darien, CT
Posts: 332
|
Great looking watch, but if you are looking for period correct accuracy, the insert is not correct for the watch. It appears that it may have been modified with an incorrect pearl/pip from a sapphire insert as that pearl is not correct for a 5512. In fact, it looks like it's cracked in half at the pear spot. Other than that, the dial and case look killer..
|
4 February 2023, 04:40 AM | #15 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,205
|
You may be able to get a 93150 directly from an AD and it might be less than you expect. Check it out and let us know.
__________________
@oldwatchdan on IG |
4 February 2023, 07:04 AM | #16 | |
TRF Moderator & 2024 SUBMARINER Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,445
|
Quote:
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
|
4 February 2023, 05:04 PM | #17 |
"TRF" Member
Join Date: Oct 2017
Location: holland
Posts: 297
|
i like the rivets.
|
5 February 2023, 04:49 AM | #18 |
"TRF" Member
Join Date: Feb 2017
Location: Texas
Posts: 228
|
I don't believe they laser weld the center links to add any metal, they just cut new links from sheet metal and fold it accordingly.
|
5 February 2023, 05:38 AM | #19 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,205
|
Yes, Michael can certainly fabricate sections in that way.
__________________
@oldwatchdan on IG |
5 February 2023, 08:35 AM | #20 |
"TRF" Member
Join Date: Oct 2018
Real Name: Dave
Location: USA
Watch: SUB 116613LN
Posts: 2,825
|
|
5 February 2023, 09:53 AM | #21 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Aug 2020
Real Name: Stan Cooper
Location: Sonoma County, CA
Watch: GMT-Master II
Posts: 2,855
|
I must be missing something. Rolliworks is in Miami and the OP is in Miami. Why not stop by with the watch and bracelet for an in-person estimate?
__________________
♛16710 GMT-Master II, ♛1915 Rolex WW1 Trench Watch, Zelos Thresher 500m GMT Meteorite, Zelos Swordfish 40 200m Ti Blood Moon Meteorite, Hamilton Pilot Chronograph, Ball Roadmaster Pilot GMT COSC Chronometer, Zelos Mako 300M True GMT Meteorite, Seiko SSC813 quartz solar powered chronograph It's weird being the same age as old people. - Stan |
5 February 2023, 10:19 AM | #22 | |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,205
|
Quote:
We are living in an internet-centric virtual world these days.
__________________
@oldwatchdan on IG |
|
5 February 2023, 10:49 AM | #23 |
"TRF" Member
Join Date: May 2011
Location: NYC
Posts: 548
|
RSC still sells 93150s It was not in stock when I requested one for my 1680 it took about 6 weeks to order from Geneva $1250. Maybe ADs can order as well?
|
5 February 2023, 08:20 PM | #24 |
"TRF" Member
Join Date: Sep 2021
Location: Home
Watch: Patek Aquanaut
Posts: 837
|
|
6 February 2023, 12:17 AM | #25 |
2024 Pledge Member
Join Date: Oct 2018
Location: Colorado, USA
Posts: 6,205
|
Like folded-link bracelets, these rivet bracelets are also basically sheet metal and pins. So IMO, it makes perfect sense to repair them with sheet metal and pins.
__________________
@oldwatchdan on IG |
6 February 2023, 02:56 AM | #26 |
"TRF" Member
Join Date: Apr 2018
Real Name: Filipe
Location: Lisbon & Wadesdah
Watch: Never too many
Posts: 1,898
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.