ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

mcneguy · 3 February 2010, 04:47 AM

My wife has a 1942 Oyster Perpetual that is losing 15 minutes a day. I sent it in to Rolex and they promptly sent it back indicating they have no parts to fix it.

Anyone have any ideas as to what I can do now?

Balboa · 3 February 2010, 05:06 AM

Rolex will not work on a watch that old. I am surprised they did not mention that before you sent it to them. Somewhere around 30 years or older they just do not want to deal with them.

There are qualified independent watchmakers who can and will fix your watch. Some can be found right here on TRF. Some parts are available for older watches, but many are not. Sometimes a knowledgeable watchmaker can find a workable part from a newer or different movement. Sometimes parts have to be hand made.

Given enough time and money, there are very few watches that can't be repaired.

Mark

HL65 · 3 February 2010, 05:15 AM

Find a good watchmaker.

Tools · 3 February 2010, 05:42 AM

You might call some of the independent RSC's around and see if they will tackle the job..

The San Fransisce shop comes to mind but there is one in the Chicago area too.. check HowardFrum.com

jnmarshall · 3 February 2010, 07:21 AM

I know of one in Lousiana. It is a mater of whether to part can be found or made.

Damage Inc. · 3 February 2010, 12:15 PM

Bob Ridley

Safetrends · 3 February 2010, 12:28 PM

When I was young I knew a old clock and watch repair man who had the tools to make a new part for any watch or clock, he was one of the best, he was so good he could figure the number of tooth and pinion on a wheel.

I was into repairing clocks as a hobby, before my car accident (a damaged alnur nerve). I must have 50 real old clocks in the house some made about the 1700's. I still pick up old clocks when I see one I cannot live without.

sakuraba · 3 February 2010, 03:15 PM

Try the RSC in SFO as Larry advised.

415-982-9830 Look for Giovanni

Although they are an RSC, they are independently owned so might be able to help you where Dallas and NYC can get "all corporate" on you.

Tell Giovanni TRF sent you

3 February 2010, 04:47 AM	#1
mcneguy "TRF" Member Join Date: Apr 2009 Real Name: Mark Location: Florida Watch: GMT (2)/SUB/DJ Posts: 218	Need assist with a repair My wife has a 1942 Oyster Perpetual that is losing 15 minutes a day. I sent it in to Rolex and they promptly sent it back indicating they have no parts to fix it. Anyone have any ideas as to what I can do now? __________________ Rolex TT Datejust II 116333 Rolex SS Submariner "The Hulk" 116610LV Omega Speedmaster Automatic

3 February 2010, 05:15 AM	#3
HL65 TRF Moderator & 2024 SUBMARINER Patron Join Date: Dec 2007 Real Name: Ken Location: SW Florida Watch: One on my wrist. Posts: 63,872	Find a good watchmaker. __________________ *SPEM SUCCESSUS ALIT*

3 February 2010, 05:42 AM	#4
Tools TRF Moderator & 2024 SUBMARINER Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,414	You might call some of the independent RSC's around and see if they will tackle the job.. The San Fransisce shop comes to mind but there is one in the Chicago area too.. check HowardFrum.com __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

3 February 2010, 12:15 PM	#6
Damage Inc. "TRF" Member Join Date: Oct 2009 Real Name: Vic Location: Colorado, USA Watch: Mechanical!! Posts: 807	Bob Ridley __________________ "Science tastes like vomit." Kari "Mythbusters hottie" Byron Z-serial GMT IIc 2.92M serial 1675 Pepsi V-serial 16610LV

3 February 2010, 05:06 AM	#2
Balboa Member Join Date: Apr 2009 Location: SoCal OC U.S.A. Posts: 342	Rolex will not work on a watch that old. I am surprised they did not mention that before you sent it to them. Somewhere around 30 years or older they just do not want to deal with them. There are qualified independent watchmakers who can and will fix your watch. Some can be found right here on TRF. Some parts are available for older watches, but many are not. Sometimes a knowledgeable watchmaker can find a workable part from a newer or different movement. Sometimes parts have to be hand made. Given enough time and money, there are very few watches that can't be repaired. Mark

3 February 2010, 07:21 AM	#5
jnmarshall "TRF" Member Join Date: Jan 2010 Location: DFW Posts: 364	I know of one in Lousiana. It is a mater of whether to part can be found or made.

3 February 2010, 12:28 PM	#7
Safetrends Banned Join Date: Oct 2009 Real Name: David Walz Location: San Diego CA USA Watch: my hand. :) Posts: 9,156	When I was young I knew a old clock and watch repair man who had the tools to make a new part for any watch or clock, he was one of the best, he was so good he could figure the number of tooth and pinion on a wheel. I was into repairing clocks as a hobby, before my car accident (a damaged alnur nerve). I must have 50 real old clocks in the house some made about the 1700's. I still pick up old clocks when I see one I cannot live without.

3 February 2010, 03:15 PM	#8
sakuraba "TRF" Member Join Date: May 2009 Real Name: Jib Location: SJ, California Watch: sun dial Posts: 8,189	Try the RSC in SFO as Larry advised. 415-982-9830 Look for Giovanni Although they are an RSC, they are independently owned so might be able to help you where Dallas and NYC can get "all corporate" on you. Tell Giovanni TRF sent you

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)