![]() |
ROLEXROLEXROLEXROLEXROLEXROLEX
ROLEXROLEXROLEXROLEXROLEXROLEX
![]() |
#1 |
Banned
Join Date: Jun 2012
Location: California
Watch: PATEK, AP, ROLEX
Posts: 639
|
Rolex Daytona cape cod cloth
Hi guys I'm just doing a research what I can use to take out hairline scratches on my watch and I've seen cape cod cloth does it really work on the center polish links? Or bezel and does anyone tried using it thank you again
|
![]() |
![]() |
![]() |
#2 |
"TRF" Member
Join Date: Nov 2009
Location: netherlands
Posts: 2,177
|
it Sure does, just be careful that it does not get onto the glass or brushed areas. It is great for removing small scratches..
__________________
116718LN Black dial |
![]() |
![]() |
![]() |
#3 |
Banned
Join Date: Jun 2012
Location: California
Watch: PATEK, AP, ROLEX
Posts: 639
|
How about the bezel? Can you use it to any how do you use it? Have you tried using it
|
![]() |
![]() |
![]() |
#4 |
"TRF" Member
Join Date: Jan 2010
Real Name: Don
Location: Borneo
Watch: it!
Posts: 864
|
To work on the bezel, fold the cloth to get a triangle shaped corner and use that on the bezel.
To work on the polished centre links, tape up the brushed sides. I'm not sure why we should avoid the glass area? |
![]() |
![]() |
![]() |
#5 |
"TRF" Member
Join Date: Dec 2009
Real Name: Mark P
Location: Toronto
Watch: SS Wimbledon DJ41
Posts: 2,046
|
Cape Cod cloths are outstanding.
|
![]() |
![]() |
![]() |
#6 |
"TRF" Member
Join Date: Mar 2010
Real Name: Ken
Location: Hawaii
Watch: 5512
Posts: 911
|
+1!!! The black stuff you see on the cloth is metal, so don't over do it. Here's a suggestion that I've seen posted...
Wrap lens-cleaning tissue around a Q-tip, soak the tissue in Cape Cod "juice" and use it that way to minimize micro-scratches. (I just use a small piece of Cape Cod followed by a micro-fiber towel.)
__________________
Rolex Milgauss GV (100m 330 feet) (2010) * Rolex Submariner 5512 (200m 660 feet) (1961) |
![]() |
![]() |
![]() |
#7 |
Banned
Join Date: Jun 2012
Location: California
Watch: PATEK, AP, ROLEX
Posts: 639
|
Thank you guys so it would take out scratches on the Daytona bezel? Would it affect the black paint on the numbers
|
![]() |
![]() |
![]() |
#8 | |||
"TRF" Member
Join Date: Apr 2012
Real Name: Heath
Location: Lawrenceburg KY
Watch: Submariner
Posts: 3,982
|
Quote:
Quote:
Quote:
I think they answered the question about the bezel twice. ![]() Just be carefull and follow the instructions.
__________________
“You may delay, but time will not.” ― Benjamin Franklin |
|||
![]() |
![]() |
![]() |
#9 |
"TRF" Member
Join Date: Jan 2009
Real Name: Bill
Location: Oklahoma City
Watch: SS GMT IIC
Posts: 55
|
I wouldn't use Cape Cod on a 18kt Daytona bezel. Stainless steel is much more foregiving. The result I got using Cape Cod on my 18kt WG bezel resulted in a cloudy finish. I'll wait until I send it in for servicing before I try it again. Perhaps someone else has obtained better results.
|
![]() |
![]() |
![]() |
#10 |
"TRF" Member
Join Date: Jul 2011
Real Name: Serg
Location: US of A
Watch: AP
Posts: 7,436
|
Leave the watch be. Have it sorted during service ...
__________________
How can you have any pudding if you don't eat yer meat???? |
![]() |
![]() |
![]() |
#11 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Dec 2010
Real Name: PaulG
Location: Georgia
Posts: 41,583
|
The bezel is a difficult area to do well. There are risks of overdoing a section and setting up a haze. You can accidentally swipe across an end link's brushed section. Masking is a pain but really is a must do. All this just to remove signs that you actually have a functioning tool watch?
I agree with those who say live and let live to the swirls and scratches until it is time to service it.
__________________
Does anyone really know what time it is? |
![]() |
![]() |
![]() |
#12 |
"TRF" Member
Join Date: May 2012
Location: PA
Watch: 116515LN
Posts: 13
|
Funny how I saw this thread as I just polished my chocolate dial RG daytona with cape code polishing cloth. It works well on the polished areas, just don't use too much pressure and stay away from any brushed areas. It also leaves a dark residue that takes some elbow grease to fully clean off. Since I'm here anyway I mind as well ask this--is there a good method to restoring brushed surfaces if it was polished by mistake? I was using the cape cod cloth on the side of my daytona case back but accidentally polished the center which is a brushed surface (was watching tv and got distracted). Now my case back is half polish and half brushed lol. Or should I just wait to my service (which would be 2 or 3 years since watch is pretty new) and have RSC take care of it?
|
![]() |
![]() |
![]() |
#13 |
"TRF" Member
Join Date: Oct 2012
Real Name: Kyle
Location: PA
Watch: 116610LN
Posts: 404
|
I picked up a couple Cape Cod Cloths before my LN came in and I've used it a couple times...It's not something I want to use regularly as I'm worried about too much that can happen...
Is it really metal that you see on the cloth? That seems a little wild to me. With watches that have brushed areas and polished areas, it's too easy for the liquid to spread and sit on the brushed areas...
__________________
Rolex Datejust II 116300 (new watch swagger in full effect) |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.