ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Tudor-iffic · 30 June 2015, 04:46 AM

Hi All, I'm trying to remove the permanent links of a 93250 ( the ones stamped "93250" that connect to the SEL). I need to do this without damaging them as I'm wanting put them away for if/when I sell at a later date. I know Rolex had a special tool for this, so I was wondering if anyone here has such a tool??
Thank you for any help you can extend would be greatly appreciated.
Regards

Sent from my iPhone using Tapatalk

tiesmith · 3 July 2015, 01:55 PM

Of course the special tool is not available to the public as Rolex doesn't want you to remove the permanent link.
They will remove it, but won't give you the link back.
If you want to remove a permanent link you can, with the aid of a vise and a pair of vise grips. Works if you carefully tape the link on both ends and put one in the vise and clamp the other end with the vise grip. A little moving side to side will do the trick. The link is junk, but your watch will fit better.
If you want to sell the watch in the future, buy another OEM link and add it to your bracelet.
The above is laid out on the website, minus4plus6.com.
Good luck

Tudor-iffic · 4 July 2015, 04:28 AM

I didn't know you could just "buy another OEM link" ?!?!
From who , from where ???

Sent from my iPhone using Tapatalk

2ar2c1 · 4 July 2015, 04:53 AM

Quote:

Originally Posted by tiesmith

They will remove it, but won't give you the link back.

just had the local RSC remove a permanent link from a 93150 they were fitting to a sub: they returned the link.

watchwatcher · 7 July 2015, 02:56 AM

And to add: you can replace the permanent link with a removable one is so desired in the future.

30 June 2015, 04:46 AM	#1
Tudor-iffic "TRF" Member Join Date: Aug 2014 Location: United States Posts: 7	Permanent link removal tool.. Hi All, I'm trying to remove the permanent links of a 93250 ( the ones stamped "93250" that connect to the SEL). I need to do this without damaging them as I'm wanting put them away for if/when I sell at a later date. I know Rolex had a special tool for this, so I was wondering if anyone here has such a tool?? Thank you for any help you can extend would be greatly appreciated. Regards Sent from my iPhone using Tapatalk

3 July 2015, 01:55 PM	#2
tiesmith "TRF" Member Join Date: May 2012 Real Name: Bryan Location: Walnut Creek, CA Watch: 14060M SS Daytona Posts: 165	Of course the special tool is not available to the public as Rolex doesn't want you to remove the permanent link. They will remove it, but won't give you the link back. If you want to remove a permanent link you can, with the aid of a vise and a pair of vise grips. Works if you carefully tape the link on both ends and put one in the vise and clamp the other end with the vise grip. A little moving side to side will do the trick. The link is junk, but your watch will fit better. If you want to sell the watch in the future, buy another OEM link and add it to your bracelet. The above is laid out on the website, minus4plus6.com. Good luck

4 July 2015, 04:28 AM	#3
Tudor-iffic "TRF" Member Join Date: Aug 2014 Location: United States Posts: 7	I didn't know you could just "buy another OEM link" ?!?! From who , from where ??? Sent from my iPhone using Tapatalk

7 July 2015, 02:56 AM	#5
watchwatcher "TRF" Member Join Date: Jan 2009 Real Name: Larry Location: Kentucky Watch: Yes Posts: 34,901	And to add: you can replace the permanent link with a removable one is so desired in the future.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)