ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Skv · 31 December 2016, 08:31 AM

Hi all,

I noticed that my 3185 (16710) makes a squeaking sound when I manually wind it. I can also hear some clicks when winding it. Is this squeaky sound normal?

I bought the watch a couple of months ago and it has had a service last summer.

Thanks for sharing your thoughts.

crowncollection · 31 December 2016, 08:33 AM

May need a service, a 16710 does not use 3135 btw

Sent from my iPhone using Tapatalk

Skv · 31 December 2016, 08:36 AM

Sorry 3185. And it has had a service a couple of months ago..

I was wondering if it might be the gaskets?

Chewbacca · 31 December 2016, 09:02 AM

Quote:

Originally Posted by Skv

Sorry 3185. And it has had a service a couple of months ago..

I was wondering if it might be the gaskets?

maybe take it back.

sickened1 · 31 December 2016, 09:11 AM

Where did you have it serviced?

77T · 31 December 2016, 09:22 AM

There is no gasket that squeaks - there are o-rings surrounding the stem - squeaking while winding is the reason you'd want to have the watchmaker who did the service to look at it while you have his workmanship guarantee...

Skv · 31 December 2016, 06:25 PM

The previous owner had it serviced. Will try to find the watchmaker and ask for his advice!

In the meanwhile I have made a short video do demonstrate my experience.
You can watch it here: https://dl.dropboxusercontent.com/u/...%2047%2027.mov

Please pay attention to the sound when I'm winding it at 0:12 - 0:14. And also near the end of the video.

Any thoughts? Or am I just imagining things?

padi56 · 31 December 2016, 07:32 PM

Quote:

Originally Posted by Skv

The previous owner had it serviced. Will try to find the watchmaker and ask for his advice!

In the meanwhile I have made a short video do demonstrate my experience.
You can watch it here: https://dl.dropboxusercontent.com/u/...%2047%2027.mov

Please pay attention to the sound when I'm winding it at 0:12 - 0:14. And also near the end of the video.

Any thoughts? Or am I just imagining things?

Sound like the mainspring is fully wound and just slipping in the spring-barrel which is quite normal.

Skv · 31 December 2016, 07:36 PM

It also seems to be making this sound when it's not fully wind. To make sure I'll will wait till it stops and then start winding it again.

Verstuurd vanaf mijn GT-I9505 met Tapatalk

padi56 · 31 December 2016, 10:42 PM

Quote:

Originally Posted by Skv

It also seems to be making this sound when it's not fully wind. To make sure I'll will wait till it stops and then start winding it again.

Verstuurd vanaf mijn GT-I9505 met Tapatalk

As long as the power-reserve after a full manual wind is around 40-48 hours while off the wrist.And watch winds while on the wrist and keep good time, and all crown hand setting etc is ok I would not worry about

31 December 2016, 08:31 AM	#1
Skv "TRF" Member Join Date: Sep 2014 Location: The Netherlands Watch: Rolex 16710 Posts: 109	3135 squeaks when manually wound Hi all, I noticed that my 3185 (16710) makes a squeaking sound when I manually wind it. I can also hear some clicks when winding it. Is this squeaky sound normal? I bought the watch a couple of months ago and it has had a service last summer. Thanks for sharing your thoughts. __________________ Time. Something to keep.

31 December 2016, 08:33 AM	#2
crowncollection "TRF" Member Join Date: Jan 2011 Real Name: David Location: australia Posts: 20,191	May need a service, a 16710 does not use 3135 btw Sent from my iPhone using Tapatalk __________________ watches many

31 December 2016, 08:36 AM	#3
Skv "TRF" Member Join Date: Sep 2014 Location: The Netherlands Watch: Rolex 16710 Posts: 109	Sorry 3185. And it has had a service a couple of months ago.. I was wondering if it might be the gaskets? __________________ Time. Something to keep.

31 December 2016, 09:22 AM	#6
77T 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Dec 2010 Real Name: PaulG Location: Georgia Posts: 41,653	3135 squeaks when manually wound There is no gasket that squeaks - there are o-rings surrounding the stem - squeaking while winding is the reason you'd want to have the watchmaker who did the service to look at it while you have his workmanship guarantee... __________________ Does anyone really know what time it is?

31 December 2016, 06:25 PM	#7
Skv "TRF" Member Join Date: Sep 2014 Location: The Netherlands Watch: Rolex 16710 Posts: 109	The previous owner had it serviced. Will try to find the watchmaker and ask for his advice! In the meanwhile I have made a short video do demonstrate my experience. You can watch it here: https://dl.dropboxusercontent.com/u/...%2047%2027.mov Please pay attention to the sound when I'm winding it at 0:12 - 0:14. And also near the end of the video. Any thoughts? Or am I just imagining things? __________________ Time. Something to keep.

31 December 2016, 09:11 AM	#5
sickened1 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Aug 2014 Real Name: Ed Location: SoCal Watch: ugiveiswatchuget Posts: 9,028	Where did you have it serviced?

31 December 2016, 07:36 PM	#9
Skv "TRF" Member Join Date: Sep 2014 Location: The Netherlands Watch: Rolex 16710 Posts: 109	It also seems to be making this sound when it's not fully wind. To make sure I'll will wait till it stops and then start winding it again. Verstuurd vanaf mijn GT-I9505 met Tapatalk __________________ Time. Something to keep.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)