ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

vesnyder · 8 January 2021, 10:49 PM

Anybody else had this issue? Just had my 1994 Omega Speedmaster Triple Date serviced at the Omega Service Center through my local Rolex AD after shattering the crystal (don't ask!). Had it back about 4 weeks and noticed the crystal was foggy. After getting a loop I could see small droplets of condensation had formed inside the crystal. Never had this happen before so I brought it back to the AD where I had it serviced. They did a pressure test and it failed - so they sent it back to Omega. It took about three months the first time so I do not expect to see it until Spring - ugh!

Anybody else seen this before?

AEC · 9 January 2021, 04:12 AM

Sorry, but I have never been pleased with quality control from Omega Service Centers. I use Nesbit's in Seattle pretty much exclusively for service to my Omega watches (might let Archer do my Speedmaster Pro when the time comes).

vesnyder · 9 January 2021, 05:21 AM

Quote:

Sorry, but I have never been pleased with quality control from Omega Service Centers. I use Nesbit's in Seattle pretty much exclusively for service to my Omega watches (might let Archer do my Speedmaster Pro when the time comes).

Tony - Not only was the quality questionable, but the cost was really high! The other disappointing thing was no documentation from the service. I had my DateJust serviced at Rollieworks and they provided details and printouts of the accuracy and testing. From Omega I got something that said "case only"??

Tavli3 · 9 January 2021, 06:25 AM

I recently had my 66 speedie serviced by an independent watchmaker. Three months later out of nowhere moisture fogs up the inside of the crystal. So I removed caseback and put the watch in the fridge overnight. Refrigerators are good dehumidifiers.

The key is to lock in the dry air. So I emptied one shelf in the fridge and used it as a workbench. Made sure gasket was set properly and applied a very light coat of oil to gasket and threads to enhance the seal and reinstalled the caseback.

My wife saw me working on my watch in the refrigerator and asked if I had lost my mind!

So far dry as a bone.

Sent from my iPhone using Tapatalk

77T · 9 January 2021, 07:08 AM

Had this happen once after I bought a preowned Seamaster. Was an o-ring failure at the stem.

But the Omega Service was 2 years old so will never know if they used the wrong size or did it poorly. The viton material doesn’t degrade that quickly.

Sent from my iPhone using Tapatalk Pro

SunTzu · 9 January 2021, 07:25 AM

Had that happen with my trusted watchmaker and a vintage Seiko chronograph after a service. Diagnosed it in 2 seconds as a faulty crown/stem gasket. Fixed it and no more condensation

Sent from Crapatalk

offrdmania · 9 January 2021, 08:37 AM

For your next service, send it to Tanner Morehouse at TM Watch. He has my Speedy Pro right now

enjoythemusic · 9 January 2021, 08:44 AM

Send it back under service warranty to be properly sealed.

vesnyder · 9 January 2021, 09:56 AM

Quote:

Send it back under service warranty to be properly sealed.

I did. I wish I had these optional service providers prior to sending back to the Omega Service Center. Live and learn!

enjoythemusic · 10 January 2021, 12:17 AM

Quote:

Originally Posted by vesnyder

I did. I wish I had these optional service providers prior to sending back to the Omega Service Center. Live and learn!

OMEGA serviced my 50th Buzz Butt (power reserve broke) in a timely manner and all went well. i just wish they spent a bit more time regulating it too as +6 sec/day is a bit high for my liking, but oh well it is what it is. Great timepieces, and imho everyone should have a Speedy within their collection.

RW16610 · 10 January 2021, 01:16 AM

That's such a shame. I really hope they get this resolved for you quickly and that all is well.

8 January 2021, 10:49 PM	#1
vesnyder "TRF" Member Join Date: Nov 2018 Real Name: Vance Location: North Coast Watch: GMT II Posts: 1,544	Condensation Inside Crystal after Service Anybody else had this issue? Just had my 1994 Omega Speedmaster Triple Date serviced at the Omega Service Center through my local Rolex AD after shattering the crystal (don't ask!). Had it back about 4 weeks and noticed the crystal was foggy. After getting a loop I could see small droplets of condensation had formed inside the crystal. Never had this happen before so I brought it back to the AD where I had it serviced. They did a pressure test and it failed - so they sent it back to Omega. It took about three months the first time so I do not expect to see it until Spring - ugh! Anybody else seen this before?

9 January 2021, 07:08 AM	#5
77T 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Dec 2010 Real Name: PaulG Location: Georgia Posts: 41,756	Had this happen once after I bought a preowned Seamaster. Was an o-ring failure at the stem. But the Omega Service was 2 years old so will never know if they used the wrong size or did it poorly. The viton material doesn’t degrade that quickly. Sent from my iPhone using Tapatalk Pro __________________ Does anyone really know what time it is?

9 January 2021, 07:25 AM	#6
SunTzu "TRF" Member Join Date: Jan 2019 Location: NJ Watch: 5513 116234 79280P Posts: 2,144	Condensation Inside Crystal after Service Had that happen with my trusted watchmaker and a vintage Seiko chronograph after a service. Diagnosed it in 2 seconds as a faulty crown/stem gasket. Fixed it and no more condensation Sent from Crapatalk __________________ The wristwatch is an intimate accessory. The best watches live in harmony and interact with the wearer, and their functions offer a reassuring and emotionally satisfying bond - Kintaro Hattori

9 January 2021, 08:37 AM	#7
offrdmania 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: May 2008 Real Name: Matt Location: Wine Country, Ca Posts: 5,964	For your next service, send it to Tanner Morehouse at TM Watch. He has my Speedy Pro right now __________________ TRF Member 11738

9 January 2021, 08:44 AM	#8
enjoythemusic 2024 Pledge Member Join Date: Nov 2012 Real Name: Steven Location: Glocal Posts: 20,746	Send it back under service warranty to be properly sealed. __________________ __________________ Love timepieces and want to become a Watchmaker? Rolex has a sensational school. www.RolexWatchmakingTrainingCenter.com/ Sent from my Etch A Sketch using String Theory.

9 January 2021, 04:12 AM	#2
AEC 2024 Pledge Member Join Date: Feb 2009 Real Name: Tony Location: Orchard Park, NY Watch: Idiot Savant Posts: 3,343	Sorry, but I have never been pleased with quality control from Omega Service Centers. I use Nesbit's in Seattle pretty much exclusively for service to my Omega watches (might let Archer do my Speedmaster Pro when the time comes).

9 January 2021, 06:25 AM	#4
Tavli3 "TRF" Member Join Date: Jan 2019 Real Name: Jim Location: miami Watch: GMT II 16760 Posts: 1,676	I recently had my 66 speedie serviced by an independent watchmaker. Three months later out of nowhere moisture fogs up the inside of the crystal. So I removed caseback and put the watch in the fridge overnight. Refrigerators are good dehumidifiers. The key is to lock in the dry air. So I emptied one shelf in the fridge and used it as a workbench. Made sure gasket was set properly and applied a very light coat of oil to gasket and threads to enhance the seal and reinstalled the caseback. My wife saw me working on my watch in the refrigerator and asked if I had lost my mind! So far dry as a bone. Sent from my iPhone using Tapatalk

10 January 2021, 01:16 AM	#11
RW16610 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Apr 2008 Real Name: Rommel Location: Toronto Canada Watch: 116710LN Posts: 9,153	That's such a shame. I really hope they get this resolved for you quickly and that all is well.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)