ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Dashimmy · 18 November 2017, 03:06 AM

I’m looking to source some knurled pins and tube bushings for a 93150 oyster Bracelet? Does anyone have a source for these?

Sent from my iPhone using Tapatalk

1WatchDawg · 18 November 2017, 05:12 AM

Your AD should be able to order them for you!

Tools · 18 November 2017, 10:06 AM

Quote:

Originally Posted by Dashimmy

I’m looking to source some knurled pins and tube bushings for a 93150 oyster Bracelet? Does anyone have a source for these?

Sent from my iPhone using Tapatalk

I don't think that Rolex considers these to be rebuildable parts. If you measure the center section of the pin, knurling is pretty easy to do. Bushings may be a bit tougher, but most machinist suppliers would have tubing with the inside and outside diameter that you need, you just cut them to fit.

Dashimmy · 18 November 2017, 02:10 PM

Quote:

Originally Posted by Tools

I don't think that Rolex considers these to be rebuildable parts. If you measure the center section of the pin, knurling is pretty easy to do. Bushings may be a bit tougher, but most machinist suppliers would have tubing with the inside and outside diameter that you need, you just cut them to fit.

I have found tubing and 1.4mm SS rods but I am yet to find a knurling tool to do something as small as 1.4mm. Where do you find a hand knurler that small?

MortenSK · 24 November 2017, 03:34 AM

https://www.cousinsuk.com/product/01...le?code=P47258

handsfull · 24 November 2017, 09:37 AM

Quote:

Originally Posted by MortenSK

https://www.cousinsuk.com/product/01...le?code=P47258

nice find!

Dashimmy · 8 December 2017, 05:39 AM

Those Cousins pins are too small. The knurled end is all too small but I did source some pins and tubes. Here are the results.

This is before

And after

It turned out pretty good.

Sent from my iPhone using Tapatalk

uansari1 · 8 December 2017, 05:58 AM

Impressive! What did you use to disassemble the individual links?

Dashimmy · 8 December 2017, 12:00 PM

Quote:

Originally Posted by uansari1

Impressive! What did you use to disassemble the individual links?

A friend and I made a tool.

Sent from my iPhone using Tapatalk

joli160 · 8 December 2017, 08:57 PM

Amazing

:thumbs:

Competition for MY

Fredrik · 9 December 2017, 07:13 AM

Nice!

The tool looks similar to the one Michael Young uses. I remember seeing it in a video he made of his works on bracelets.

Racewatch · 24 January 2018, 09:54 PM

[QUOTE=Dashimmy;8093777]Those Cousins pins are too small. The knurled end is all too small but I did source some pins and tubes. Here are the results.
G]

It turned out pretty good.

where did you find the pins and sleeves/tube you used
thanks for the info

trueblackpercula · 21 March 2018, 11:13 PM

awesome

trueblackpercula · 24 March 2018, 12:35 AM

hi after researching to no end ,can you please tell me what size and quantity i need for my two tone submariner 16613- bracelet make is MA1-93253.

I really appreciate it

Michael

suligeo · 9 April 2019, 02:50 AM

Where I can get the Pins if not from cousins?

CHAiNS · 4 June 2020, 05:26 PM

Nice work! Would you be willing to divulge what the pin and tube measurements are, and from where you purchased them? Also, by "tube", are you referring to the tube/bushing that is found in 18k models, to prevent excessive wear from the steel knurled pin on the gold center link, or is this yet another type of tube?

alex2235 · 27 March 2021, 04:41 AM

Hello guys

Message for Dashimmy

I have the same problem to find pins and tubes for 93150, where do you find it?
Cousins are too small

Thanks!

18 November 2017, 03:06 AM	#1
Dashimmy "TRF" Member Join Date: Aug 2013 Real Name: Heath Location: Elkton Ky Watch: Submariner Posts: 354	I need oysters bracelet pins I’m looking to source some knurled pins and tube bushings for a 93150 oyster Bracelet? Does anyone have a source for these? Sent from my iPhone using Tapatalk

8 December 2017, 05:58 AM	#8
uansari1 "TRF" Member Join Date: Nov 2013 Location: Doha, Qatar Watch: Polar 16570 Posts: 535	Impressive! What did you use to disassemble the individual links? __________________ Explorer II 16570 Polar (3186) GMT Master II 116710LN GMT Master II 126710BLRO (jubilee) Explorer 124270 Omega Seamaster GMT 50th Anniversary

8 December 2017, 08:57 PM	#10
joli160 2025 TitaniumYM Pledge Member Join Date: Apr 2013 Location: NL Watch: Yachtmaster Posts: 14,984	Amazing :thumbs: Competition for MY __________________ Day Date 18238, Yachtmaster 16622, Deepsea 116660, Submariner 116619, SkyD 326935, DJ 178271, DJ 69158, Yachtmaster 169622, GMT 116713LN, GMT 126711.

27 March 2021, 04:41 AM	#17
alex2235 "TRF" Member Join Date: Jan 2020 Location: Paris Watch: 5513,1680, 16750 Posts: 1	Pins & Tubes Hello guys Message for Dashimmy I have the same problem to find pins and tubes for 93150, where do you find it? Cousins are too small Thanks!

18 November 2017, 05:12 AM	#2
1WatchDawg "TRF" Member Join Date: Nov 2014 Real Name: Frank Location: GEORGIA Watch: 16610T Sub Date Posts: 413	Your AD should be able to order them for you!

24 November 2017, 03:34 AM	#5
MortenSK "TRF" Member Join Date: Jul 2014 Real Name: Morten Location: Oslo, Norway Posts: 25	https://www.cousinsuk.com/product/01...le?code=P47258

8 December 2017, 05:39 AM	#7
Dashimmy "TRF" Member Join Date: Aug 2013 Real Name: Heath Location: Elkton Ky Watch: Submariner Posts: 354	Those Cousins pins are too small. The knurled end is all too small but I did source some pins and tubes. Here are the results. This is before And after It turned out pretty good. Sent from my iPhone using Tapatalk

9 December 2017, 07:13 AM	#11
Fredrik 2025 TitaniumYM Pledge Member Join Date: Oct 2011 Location: Sweden Watch: 1680 Posts: 1,891	Nice! The tool looks similar to the one Michael Young uses. I remember seeing it in a video he made of his works on bracelets.

24 January 2018, 09:54 PM	#12
Racewatch "TRF" Member Join Date: Jan 2018 Location: oak ridge, tn Posts: 1	[QUOTE=Dashimmy;8093777]Those Cousins pins are too small. The knurled end is all too small but I did source some pins and tubes. Here are the results. G] It turned out pretty good. where did you find the pins and sleeves/tube you used thanks for the info

21 March 2018, 11:13 PM	#13
trueblackpercula "TRF" Member Join Date: Feb 2018 Location: usa Posts: 28	awesome

24 March 2018, 12:35 AM	#14
trueblackpercula "TRF" Member Join Date: Feb 2018 Location: usa Posts: 28	hi after researching to no end ,can you please tell me what size and quantity i need for my two tone submariner 16613- bracelet make is MA1-93253. I really appreciate it Michael

9 April 2019, 02:50 AM	#15
suligeo 2025 Pledge Member Join Date: Jun 2013 Location: Germany Posts: 611	Where I can get the Pins if not from cousins?

4 June 2020, 05:26 PM	#16
CHAiNS "TRF" Member Join Date: Jan 2010 Location: Sydney Posts: 4	Nice work! Would you be willing to divulge what the pin and tube measurements are, and from where you purchased them? Also, by "tube", are you referring to the tube/bushing that is found in 18k models, to prevent excessive wear from the steel knurled pin on the gold center link, or is this yet another type of tube?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)