Sizing a Sea Dweller 16600 Bracelet

[stat]

Is this something I can do myself with the included tool or should I leave it to a professional? Do I need practice like changing a strap? Sometimes the "pros" seem are a little less than careful. Just wanted to know if this was a possibility. Thanks in advance!

[sea-dweller]

You can easily size it with the included tool. Changing the strap can also be done, but sizing the SD bracelet is easier to do, IMO.

[stat]

I'm assuming its pretty self explanatory? Are there any resources I can take a look at?

[promethus]

I use a mini screwdriver for the links and a needle on the fine adjustment..... LOL!!!

[Mrdi]

Simple
especially with th Rolex driver.
You might want to tape around the screw the first time you try
You don't want the driver to scratch the bracelet.
I usually insert the driver in the screw head and then tap the top of the driver with a very small hammer to loosen the bond.

[stat]

Does the tool kit consist of just the one tool - the screw diver?

[JJ Irani]

Originally Posted by stat

Does the tool kit consist of just the one tool - the screw diver?

This is exactly how you should get the tool kit with your Sea-Dweller. The extra link marked "L" is an attachment in case you wish to wear the watch on the OUTSIDE of a very thick diving suit.

That screwdriver is excellent for Oyster bracelets, but too big for the Jubilee bracelets which require a slightly smaller screwdriver head.

[Wildwing]

Bear in mind, you might not need to remove a link. You can adjust within the clasp for a tighter fit, at least as it comes from the factory.

[stat]

You might be right. I really hope I don't scratch up the bracelet trying to size it. Thanks to everyone that replied!

[sea-dweller]

Just be careful, the tool will effectively adjust the SD bracelet. I do mine and have adjusted a bracelet for a friend, who has an SD. Good luck.

[PeterT]

I lodge the bracelet vertically with the screw head pointing upwards in something like this:

http://www.agthomas.co.uk/images/B981_982Holder.jpg

To protect the bracelet from any scuffs from the block I line the slots with a soft cloth. This supports the bracelet even better.
The Sea Dweller screwdriver is a perfect fit for the screws. To loosen the loctite material on the screw threads some people warm up the bracelet with a hair dryer before using the screwdriver. Then, make sure that you are using enough downwards pressure as you turn the screw anti clockwise. This will ensure that the screwdriver will not slip out of the slot and cause a big scratch to your pride and joy.
Just take it nice and slow and keep looking to see that the screwdriver is in the middle of the screw slot at all times. Keep on concentrating!!

PeterT

[stat]

oh no!! i do not have one of these nice holders..is everyone using a holder...can i do it without it?

[crazycarlitos]

Originally Posted by JJ Irani

This is exactly how you should get the tool kit with your Sea-Dweller. The extra link marked "L" is an attachment in case you wish to wear the watch on the OUTSIDE of a very thick diving suit.

That screwdriver is excellent for Oyster bracelets, but too big for the Jubilee bracelets which require a slightly smaller screwdriver head.

i just picked up a sea dweller.

can anyone clue me in on how to use the 'L' extension?

i understand what its for, but i am unclear on where to put it..

thx in adv!

[JJ Irani]

Originally Posted by crazycarlitos

i just picked up a sea dweller.

can anyone clue me in on how to use the 'L' extension?

i understand what its for, but i am unclear on where to put it..

thx in adv!

If you take off the cap on the pointy end of that SD screwdriver, you will find inside a black screw. This is the screw that attaches that "L" link to the last link on the '12' side. The "L" link in turn attaches to the the "S" link and you thereby get the added extension.

99.999999999% of us will never need to do this in our entire lives. Even with a normal diver's suit, all you need to do is pull out the "S" extension link already there on the bracelet and the watch will fit on the outside of any standard diver's suit.

JJ