ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

kokota · 26 March 2010, 04:53 AM

Hello All,

Is it safe to say that a K724xxx production GMT can go either way in regards to having or not having the laser etched coronet?
K series Rolexes were produced in the 2001 yr range and I understand that the crystal etching was also introduced in that time period.

For those that own a K serial Rolex:
Is your crystal original and etched?

TIA

Tools · 26 March 2010, 04:58 AM

I would say this is an accurate statement......

cujo · 7 April 2010, 04:19 AM

I read the post that the Laser Etched Coronet began sometime with K... can someone tell me which models and if it is still used? Also, with more recent releases, I noticed the marking on the side of the case. What are these called, when did they begin, and which models are they used on? Has one marking replaced the other or do they now have both. Sorry for the many questions, however, I can't seem to find a brief on this. Thanks.

Tools · 7 April 2010, 06:14 AM

The etched coronet is used on all Rolex Crystals except the Milgauss GV..

The marking on the side is a bar-code sticker.......... it peels off..

Quote:

Originally Posted by cujo

I read the post that the Laser Etched Coronet began sometime with K... can someone tell me which models and if it is still used? Also, with more recent releases, I noticed the marking on the side of the case. What are these called, when did they begin, and which models are they used on? Has one marking replaced the other or do they now have both. Sorry for the many questions, however, I can't seem to find a brief on this. Thanks.

cujo · 7 April 2010, 01:00 PM

Thanks for taking the time to provide the explanation. I have both an M series SS Sub and a V series TT Sub and I can't seem to see either. Is it very difficult to find?

sleddog · 7 April 2010, 01:24 PM

Quote:

Originally Posted by cujo

Thanks for taking the time to provide the explanation. I have both an M series SS Sub and a V series TT Sub and I can't seem to see either. Is it very difficult to find?

It's not easy,but at the right angle and light source,it can be seen with the naked eye!!! If you have good vision....

ddnyc77 · 7 April 2010, 01:39 PM

Quote:

Originally Posted by cujo

Thanks for taking the time to provide the explanation. I have both an M series SS Sub and a V series TT Sub and I can't seem to see either. Is it very difficult to find?

yup, shine a flashlight at the 12 o'clock position pointing to the 6 o'clock position where you should see the crown. Hard to see, I thought my Z series sub didn't have it for a while, but it was there.

cujo · 7 April 2010, 09:45 PM

Thanks again..... I just tried it....a flash light from 12 o'clock directed to the 6 o'clock position did it...............
So in a recap....it started sometime in 2001 with some of the K's and the Milgauss GV is the only model that doesn't have it.
TRF guys...thanks.

DRAWTOOL · 7 April 2010, 10:02 PM

My "K" 16570 has no etching and I don't care.

Andad · 7 April 2010, 11:32 PM

My K 14060M has the original crystal with le.

26 March 2010, 04:53 AM	#1
kokota 2025 Pledge Member Join Date: Nov 2008 Location: NYC Posts: 1,276	Quick question on laser etched coronet Hello All, Is it safe to say that a K724xxx production GMT can go either way in regards to having or not having the laser etched coronet? K series Rolexes were produced in the 2001 yr range and I understand that the crystal etching was also introduced in that time period. For those that own a K serial Rolex: Is your crystal original and etched? TIA

26 March 2010, 04:58 AM	#2
Tools TRF Moderator & 2025 Titanium Yacht-Master Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,681	I would say this is an accurate statement...... __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

7 April 2010, 04:19 AM	#3
cujo Member Join Date: Feb 2010 Location: Florida, USA Watch: Pepsi GMT... Posts: 211	Regarding Laser Etched Coronet I read the post that the Laser Etched Coronet began sometime with K... can someone tell me which models and if it is still used? Also, with more recent releases, I noticed the marking on the side of the case. What are these called, when did they begin, and which models are they used on? Has one marking replaced the other or do they now have both. Sorry for the many questions, however, I can't seem to find a brief on this. Thanks.

7 April 2010, 11:32 PM	#10
Andad 2025 TitaniumYM Pledge Member Join Date: Nov 2006 Real Name: Eddie Location: Australia Watch: A few. Posts: 37,752	My K 14060M has the original crystal with le. __________________ E

7 April 2010, 01:00 PM	#5
cujo Member Join Date: Feb 2010 Location: Florida, USA Watch: Pepsi GMT... Posts: 211	Thanks for taking the time to provide the explanation. I have both an M series SS Sub and a V series TT Sub and I can't seem to see either. Is it very difficult to find?

7 April 2010, 09:45 PM	#8
cujo Member Join Date: Feb 2010 Location: Florida, USA Watch: Pepsi GMT... Posts: 211	Thanks again..... I just tried it....a flash light from 12 o'clock directed to the 6 o'clock position did it............... So in a recap....it started sometime in 2001 with some of the K's and the Milgauss GV is the only model that doesn't have it. TRF guys...thanks.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)