ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
28 April 2010, 03:09 AM | #1 |
"TRF" Member
Join Date: Jan 2010
Real Name: Howard
Location: Midwest
Watch: 18078
Posts: 604
|
Just got my estinate call from the Dallas RSC
Last week I had sent in my 18078 Date-Date to the Dallas RSC for a service. They received the watch yesterday morning and called me this morning with an estimate and to address the couple comments on the form I sent in with the watch.
First let me say she was very pleasant and professional and answered any questions I had to my complete satisfaction. She told me the watch had a preliminary evaluation and they found the following (with prices). 1) The movement is in need of a service, the oils are dry, the tube and crown needs replacement as well as all gaskets. They will completely service/clean the movement and replace any necessary internal parts and oils. Price for factory service on a mens Day-Date: $750.00 + $46.00 return freight charge. 2) The crystal has a few very tiny chips at the edge (I never even noticed them) but nothing that will compromise its integrity, replacement is my option. I told her go ahead and replace it. Price: $135.00 3) The bracelet has minimal wear, the clasp blades are slightly bent and have a couple small gouges. They will repair and straighten the blades and refinish the entire clasp as part of the complete refinishing service. 4) I had asked they not remove the green sticker still on the case back on the form, but she suggested I have them remove it as it can trap grit and moisture which can damage the case back and it serves no purpose and Rolex recommends removal of the sticker right after the watch is purchased. I told her to go ahead and remove it. She then explained that if any other issues come up after the watch is completely disassembled by a senior tech or if anything else is required they would let me know, as everything today was a preliminary appraisal of the watches condition and service requirements. She also explained the current turnaround is about 4 weeks and all the work now carries a full 2 yr. warranty. So I now eagerly await my watch back looking and running like new!
__________________
Day-Date Bark Finish 18078, TT Datejust Turn-O-Graph Oysterquartz 17013 Explorer I 114270 |
28 April 2010, 03:11 AM | #2 |
Banned
Join Date: Jul 2008
Real Name: Paul
Location: San Diego
Watch: 126619LB
Posts: 21,540
|
Howard, be ready to post pics when you get it back but I'm betting it will look showroom new!!!
|
28 April 2010, 03:24 AM | #3 |
"TRF" Member
Join Date: Apr 2010
Real Name: Tuan
Location: SF Bay Area
Watch: Deepsea
Posts: 103
|
It's nice to have the 2 year warranty.
|
28 April 2010, 03:24 AM | #4 |
Banned
Join Date: Jan 2009
Real Name: Mark-O!
Location: Arlington, TX
Watch: Rolex
Posts: 12,714
|
How exciting! If you don't mind me asking, when was the watch last serviced, or is this the first time? At any rate, please post pics when you get it back!
|
28 April 2010, 03:30 AM | #5 |
Banned
Join Date: Oct 2009
Real Name: Tristan
Location: GIRONA , SPAIN
Watch: 116520/660/710/334
Posts: 7,147
|
Well worth it's money , believe me .
|
28 April 2010, 03:32 AM | #6 |
TRF Moderator & 2024 SubLV41 Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,490
|
I think that I would have gone the same route...........
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
28 April 2010, 03:35 AM | #7 |
"TRF" Member
Join Date: Jan 2008
Real Name: Bob
Location: Dallas, Texas
Watch: Daytona Meteorite
Posts: 3,417
|
A trip to the RSC is the best reason not to do the crazy aftermarket PVD coatings.... Can't wait to see the photos of your refresh!
__________________
meteor flying to Earth onto my wrist... 116509 Daytona Meteorite, 116520 Daytona Black, 116710 GMTIIC, 16013 DATEJUST, CARTIER SANTOS 100 W20090X8, IWC Big Pilot, IWC Top Gun "Everything works out in the end. If it hasn't worked out, it's not the end." |
28 April 2010, 03:35 AM | #8 |
2024 SubLV41 Pledge Member
Join Date: Dec 2009
Real Name: Bob
Location: U.S.A.
Watch: 1655
Posts: 63,962
|
Well worth it. You are a good Rolex owner...taking care of it. You will be happy when you get a brand new classic Rolex back from RSC.
You will forget about the $'s spent when it is back on your wrist.
__________________
Founder & Card Carrying Member of the Global Association of Retro-Grouch-Curmudgeons |
28 April 2010, 03:40 AM | #9 |
"TRF" Member
Join Date: Jan 2010
Real Name: Howard
Location: Midwest
Watch: 18078
Posts: 604
|
<<< If you don't mind me asking, when was the watch last serviced >>>
I'm embarrassed to say I don't know. I purchased it from an older gentleman some time back who was the original owner, and I never asked. It wouldn't surprise me if it's never had a full service, but it still kept time to +4 sec. a day.
__________________
Day-Date Bark Finish 18078, TT Datejust Turn-O-Graph Oysterquartz 17013 Explorer I 114270 |
28 April 2010, 05:48 AM | #10 |
"TRF" Member
Join Date: Jan 2007
Real Name: Karis
Location: USA
Posts: 19,377
|
Wise move, Howard. It will come back as good as new! I've had great experiences with the Dallas RSC.
|
28 April 2010, 06:02 AM | #11 |
Banned
Join Date: Oct 2005
Real Name: Gerardo
Location: Here
Watch: ALL of them
Posts: 32,098
|
....looking forward to pics when you receive it!
|
28 April 2010, 06:17 AM | #12 |
"TRF" Member
Join Date: Jan 2009
Real Name: Leo
Location: Midwest
Watch: GMT-II 16710 PEPSI
Posts: 21,461
|
Sounds like your watch is going to come back as good as new. I'm sure you will hate the wait but I'm sure it will be worth it!!!
__________________
SS GMT-II 16710 PEPSI(Z-serial#) THE ONLY DIFFERENCE BETWEEN MEN AND BOYS IS THE PRICE OF THE TOYS!!! MontBlanc Meisterstuck Doue Silver Barley MontBlanc Meisterstuck Solitaire Doue Signum Proud Card Carrying Member of the Curmudgeons.....Yikes!!! |
28 April 2010, 07:25 AM | #13 |
Member
Join Date: Oct 2009
Location: Riverside, CA
Watch: Submariner&SDDS
Posts: 306
|
Sounds to me your watch is in good hands, please post pictures when you receive your watch....
|
28 April 2010, 08:30 AM | #14 |
"TRF" Member
Join Date: Dec 2009
Location: Dallas TX
Watch: Rolex
Posts: 2,812
|
Kewl
|
28 April 2010, 08:34 AM | #15 |
"TRF" Member
Join Date: Nov 2009
Real Name: John
Location: MS & LA
Watch: Rolex Day-Date II
Posts: 1,084
|
Good move. Nice to hear another positive report about the Dallas RSC!
__________________
- John >>> Rolex & Porsche Owner/Enthusiast <<< |
28 April 2010, 09:25 AM | #16 |
"TRF" Member
Join Date: Jan 2010
Real Name: Jerry
Location: New Mexico
Watch: 16610 M Series
Posts: 1,084
|
Great choice to have it serviced; it will be a "new" one when you get it back; congrats!
|
28 April 2010, 10:34 AM | #17 |
"TRF" Member
Join Date: Aug 2007
Location: Beverly Hills, CA
Watch: Yachtmaster
Posts: 3,940
|
Dallas serviced my Yachtmaster last year and I was pleased with their service. They were very friendly.
I am also impressed with the 2 year warranty. Does anyone know if that is standard now? I received a 1 year warranty with service at the RSC. |
28 April 2010, 02:05 PM | #18 |
Banned
Join Date: Apr 2010
Real Name: Tim
Location: tennessee
Watch: 16623 YM
Posts: 3,630
|
Howard,i cant thank you enough for the thread and detailed info.this is EXACTLY what i needed to read as i make my decision where to send my YM.great post and can't wait to see the after pic's!
|
28 April 2010, 03:28 PM | #19 |
"TRF" Member
Join Date: May 2007
Location: Central Florida
Posts: 440
|
It sounds like your watch will come back looking and running like a new one and for that I'm glad for you.
However, to pay over $900 to have a watch serviced that was keeping time within 4 seconds a day is ludicrous, IMO. Sorry. I think Rolex is way too proud of their service no matter how expert it is.
__________________
Regards, Ray K. |
29 April 2010, 02:12 AM | #20 |
"TRF" Member
Join Date: Jan 2010
Real Name: Howard
Location: Midwest
Watch: 18078
Posts: 604
|
I'm wondering if I should call and get a quote on new hands while it's in for service? The lume on mine no longer really lume anymore. I'm guessing they couldn't be more than about $100.00 or so?
__________________
Day-Date Bark Finish 18078, TT Datejust Turn-O-Graph Oysterquartz 17013 Explorer I 114270 |
29 April 2010, 03:35 AM | #21 |
"TRF" Member
Join Date: Jan 2010
Location: Ann Arbor, MI
Watch: GMT-II Pepsi
Posts: 1,051
|
my dad just had his gold day/date serviced for the first time in 12 years... $1400
|
30 April 2010, 12:47 AM | #22 | |
Member
Join Date: Apr 2007
Location: Illinois
Watch: 18078 Day Date
Posts: 59
|
Quote:
1-Second Hand = $27 This was back in Nov of 2008 when I sent my Father's watch to NY RSC. Dallas will do an outstanding job on it. You'll be speechless when it comes back. Looking forward to the pics. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.