ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

onryo · 5 March 2011, 01:00 PM

I recently bought a 16800 head, but it didn't come with the bracelet or endlinks. If I remember correctly, it should be a 93150 bracelet with 593 endlinks. I am going to send it in for service shortly, but I was wondering if I would be better off by buying one before send it in or pay RSC for a replacement? (assuming they would provide a replacement part for it)

Thanks in advance!

gerard88t · 5 March 2011, 01:12 PM

Hi George,
You're correct on numbers of bracelet. May be wiser to purchase from a seller on our forum here as it might be more cost effective for you. I'm not sure if you will be required to complete the repairs at a RSC with a bracelet purchase needed to complete repairs with warranty from them. I'm sure someone will come to your thread with definitive answers though. Good luck and show us your watch when you can.

bluemartinifan · 5 March 2011, 01:12 PM

The 93150 will fit - someone else please confirm the end pieces for a 16800. I would buy a 93150 here. Prices range from approx $400 - $700

onryo · 5 March 2011, 01:15 PM

Thanks guys. I was wondering what the most cost effective option would be, so I'll start poking around the "Wanting to buy" section. Much appreciated.

HEWLIO · 5 March 2011, 02:08 PM

You need either 501 B or 580 End links.

glocati · 5 March 2011, 03:34 PM

You may want to give them/RSC a call and price out a 93150, as I was surprised but got a brand new 78360 installed on my 1675 for less than I was seeing them go for on the used market.

It went like this: Sent them the 1675 with a loose 6251 rolled jubilee with 555 ends and was given $225 trade in and paid $405 for the brand new 78360 with 580 end pieces. That of course totals $630 for a brand new one. I saw used 78360s go for that or higher on a regular basis.

This of course was for a 78360 versus the more expensive 93150 but I believe they will give you pricing and you can make your decision from there.

Good luck on it.

gerard88t · 5 March 2011, 05:07 PM

Quote:

Originally Posted by HEWLIO

You need either 501 B or 580 End links.

I am very certain that the correct ends for the 16800 are 593. Same for the 168000.

SS Oyster · 5 March 2011, 06:22 PM

in 1/2010, RSC charged me $950 for a 93150 bracelet with 580 end links.

onryo · 5 March 2011, 06:33 PM

I put a feeler out on the WTB forums and we'll see what we come up with. I'd like to avoid giving RSC $950. Especially considering the watch is far from new and would look a bit "off" with a brand new bracelet. Thanks everyone!

5 March 2011, 01:00 PM	#1
onryo Member Join Date: Dec 2010 Location: Seattle Watch: GMT-Master II Posts: 410	Bracelet for a 16800, what should I do? I recently bought a 16800 head, but it didn't come with the bracelet or endlinks. If I remember correctly, it should be a 93150 bracelet with 593 endlinks. I am going to send it in for service shortly, but I was wondering if I would be better off by buying one before send it in or pay RSC for a replacement? (assuming they would provide a replacement part for it) Thanks in advance!

5 March 2011, 02:08 PM	#5
HEWLIO "TRF" Member Join Date: Apr 2010 Location: New York Watch: 16800 Matte Sub Posts: 100	You need either 501 B or 580 End links. __________________

5 March 2011, 01:12 PM	#2
gerard88t "TRF" Member Join Date: Nov 2008 Location: Ask Posts: 409	Hi George, You're correct on numbers of bracelet. May be wiser to purchase from a seller on our forum here as it might be more cost effective for you. I'm not sure if you will be required to complete the repairs at a RSC with a bracelet purchase needed to complete repairs with warranty from them. I'm sure someone will come to your thread with definitive answers though. Good luck and show us your watch when you can.

5 March 2011, 01:12 PM	#3
bluemartinifan "TRF" Member Join Date: Jun 2008 Real Name: Russ Location: Dallas Texas Watch: 5513 Posts: 2,124	The 93150 will fit - someone else please confirm the end pieces for a 16800. I would buy a 93150 here. Prices range from approx $400 - $700

5 March 2011, 01:15 PM	#4
onryo Member Join Date: Dec 2010 Location: Seattle Watch: GMT-Master II Posts: 410	Thanks guys. I was wondering what the most cost effective option would be, so I'll start poking around the "Wanting to buy" section. Much appreciated.

5 March 2011, 03:34 PM	#6
glocati "TRF" Member Join Date: Oct 2007 Real Name: Greg Location: Portland, Oregon Watch: 1675/3+16013 Posts: 538	You may want to give them/RSC a call and price out a 93150, as I was surprised but got a brand new 78360 installed on my 1675 for less than I was seeing them go for on the used market. It went like this: Sent them the 1675 with a loose 6251 rolled jubilee with 555 ends and was given $225 trade in and paid $405 for the brand new 78360 with 580 end pieces. That of course totals $630 for a brand new one. I saw used 78360s go for that or higher on a regular basis. This of course was for a 78360 versus the more expensive 93150 but I believe they will give you pricing and you can make your decision from there. Good luck on it.

5 March 2011, 06:22 PM	#8
SS Oyster 2024 SubLV41 Pledge Member Join Date: Sep 2008 Location: USA Posts: 9,202	in 1/2010, RSC charged me $950 for a 93150 bracelet with 580 end links.

5 March 2011, 06:33 PM	#9
onryo Member Join Date: Dec 2010 Location: Seattle Watch: GMT-Master II Posts: 410	I put a feeler out on the WTB forums and we'll see what we come up with. I'd like to avoid giving RSC $950. Especially considering the watch is far from new and would look a bit "off" with a brand new bracelet. Thanks everyone!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)