ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

mfer · 15 March 2012, 04:58 AM

Quick Q for the the tech experts.

When I was changing the time on my 16610 recently for daylight savings, I hacked the second hand and moved the watch ahead 1 hour. I pushed the crown back in and the watch didn't start up. I had to give it a slight tap. It has never done this before but...It has always done this when I'm winding my watch from a dead stop. I always have to give it a slight tap to get it moving.

It has been like this for some time. It is a M series if that matters.

Is this normal?

My Panerai's (base ETA 6497 and JLC 8 day) don't do this.

Thanks in advance.

Rikki · 15 March 2012, 11:37 AM

Sounds like the pallet stones are getting a bit dry. Rikki

15 March 2012, 04:58 AM	#1
mfer "TRF" Member Join Date: Mar 2007 Real Name: Mik Location: USA Posts: 13,723	Second Hand doesn't move easily on startup Quick Q for the the tech experts. When I was changing the time on my 16610 recently for daylight savings, I hacked the second hand and moved the watch ahead 1 hour. I pushed the crown back in and the watch didn't start up. I had to give it a slight tap. It has never done this before but...It has always done this when I'm winding my watch from a dead stop. I always have to give it a slight tap to get it moving. It has been like this for some time. It is a M series if that matters. Is this normal? My Panerai's (base ETA 6497 and JLC 8 day) don't do this. Thanks in advance. __________________ member#3242

15 March 2012, 11:37 AM	#2
Rikki TechXpert Join Date: Jun 2009 Real Name: Rik Dietel Location: Seminole Fla Watch: 5512 s/s Sub Posts: 1,818	Sounds like the pallet stones are getting a bit dry. Rikki __________________ Century 21 Certified watchmaker Omega Service Provider Trained Omega OWME Certified. Rolex Parts Account Holder.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)