ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Barryboy · 31 March 2014, 04:29 AM

Hii... As a newbie please forgive me if I have posted this in the wrong sub-forum and Mods, please move it if necessary.

I have recently upgraded my Tudor Prince chrono to a 2008 Milgauss white dial model - a lot of money changed hands but this is my 60th birthday present to myself and I reckon I deserve it. I have a couple of questions which I hope the experts on here can help me out with:

1) I rather thought that I should be able to see a tiny Rolex logo engraved into the crystal but if it's there I'm jiggered if I can find it....

2) Should the bracelet have numbers engraved on the end piece and/or first link? Mine had none at all except for the words "Rolex Geneve Swiss made" on the lower part of the clasp and the words "Steelinox E011 and Rolex SA (in a circle)" on the centre piece of the clasp. The research I've been able to do indicates that the bracelet was manufactured in November 2007 but the watch only sold in 2008 and the bracelet numbers can only be found by removing the bracelet. Does this sound correct, do you think?

I don't for a minute think I've been sold a fake but I'm a bit concerned about the engraved logo and would be grateful if somebody could set me straight on this point.

Regards
Rob

Vanessa CW21 · 31 March 2014, 05:08 PM

Don't worry, it all sounds legit.

Sent from my LG-MS770 using Tapatalk

Old Expat Beast · 31 March 2014, 05:23 PM

You need to use a magnifier to see the logo, its really small. Watch being a bit later than the bracelet/clasp code is normal.

JayAK · 12 April 2014, 11:25 PM

Shine a flashlight up from the bottom edge of the crystal, when the light hits it just right you will see the logo.

31 March 2014, 04:29 AM	#1
Barryboy "TRF" Member Join Date: Apr 2009 Real Name: Rob Location: South Wales Watch: 2002 16600 Seadwel Posts: 35	2008 Milgauss - White Dial Hii... As a newbie please forgive me if I have posted this in the wrong sub-forum and Mods, please move it if necessary. I have recently upgraded my Tudor Prince chrono to a 2008 Milgauss white dial model - a lot of money changed hands but this is my 60th birthday present to myself and I reckon I deserve it. I have a couple of questions which I hope the experts on here can help me out with: 1) I rather thought that I should be able to see a tiny Rolex logo engraved into the crystal but if it's there I'm jiggered if I can find it.... 2) Should the bracelet have numbers engraved on the end piece and/or first link? Mine had none at all except for the words "Rolex Geneve Swiss made" on the lower part of the clasp and the words "Steelinox E011 and Rolex SA (in a circle)" on the centre piece of the clasp. The research I've been able to do indicates that the bracelet was manufactured in November 2007 but the watch only sold in 2008 and the bracelet numbers can only be found by removing the bracelet. Does this sound correct, do you think? I don't for a minute think I've been sold a fake but I'm a bit concerned about the engraved logo and would be grateful if somebody could set me straight on this point. Regards Rob __________________ Machines were mice and men were lions once upon a time... but now it's just the opposite, it's twice upon a time.

31 March 2014, 05:08 PM	#2
Vanessa CW21 TechXpert & 2016 Patron Join Date: Aug 2007 Location: Mx Posts: 1,572	Don't worry, it all sounds legit. Sent from my LG-MS770 using Tapatalk __________________ Member# 5731 Instagram: @vanessa.cw21 Watch my Rolex repair video: https://youtu.be/jDnaotCTpTA

31 March 2014, 05:23 PM	#3
Old Expat Beast TRF Moderator & 2024 SubLV41 Patron Join Date: Jul 2013 Real Name: Adam Location: Far East Watch: Golden Tuna Posts: 28,794	You need to use a magnifier to see the logo, its really small. Watch being a bit later than the bracelet/clasp code is normal.

12 April 2014, 11:25 PM	#4
JayAK "TRF" Member Join Date: Aug 2010 Location: USA Watch: 116618LN Posts: 609	Shine a flashlight up from the bottom edge of the crystal, when the light hits it just right you will see the logo.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)