ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Chewbacca · 8 April 2014, 12:40 PM

hello members,

got an issue with my 16613LV.

just unscrewed the crown to pos. 1 (crown out) and after winding about 10 rotations, it went freespin on me.

re-screwed. unscrewed back to pos. 1 and wound properly.

tried again to see if i could repeat the original issue, and it went free again.

i think it could be a mainspring issue but the watch only has about 2yrs wrist use since new, but has many restarts as i rotate often. its a Z 2006 series.

gonna take it to my ad this wknd for a quick assessment but any ideas?

thanks in advance.

Chewbacca · 12 April 2014, 02:52 AM

no one huh? will update after a trip to the AD sat.

Vanessa CW21 · 12 April 2014, 03:11 PM

Most likely the crown is spinning freely due to the increased tension and probably a lack of grip.

Sent from my LG-MS770 using Tapatalk

Chewbacca · 12 April 2014, 10:02 PM

Quote:

Originally Posted by Vanessa CW21

Most likely the crown is spinning freely due to the increased tension and probably a lack of grip.

Sent from my LG-MS770 using Tapatalk

thank you vanessa(?).

appreciate the response. i'll post what the ad says after a quick visit today.

but hoping it doesn;t need a full service as i've got others with more wrinkles and never had this happen.

gwozhog · 12 April 2014, 10:50 PM

I did not know they made a 16613lv. Are you sure its not a 16610lv?

Vanessa CW21 · 12 April 2014, 11:30 PM

I won't require a service if its the crown. It would only need a new crown.

I'm a little confused why you put a question mark by my name?

Sent from my LG-MS770 using Tapatalk

Chewbacca · 13 April 2014, 02:07 AM

Quote:

Originally Posted by gwozhog

I did not know they made a 16613lv. Are you sure its not a 16610lv?

16610LV. good catch. thanks

Chewbacca · 13 April 2014, 02:11 AM

Quote:

Originally Posted by Vanessa CW21

I won't require a service if its the crown. It would only need a new crown.

I'm a little confused why you put a question mark by my name?

Sent from my LG-MS770 using Tapatalk

well, its not on your 'real name' slot of the lower avatar. its on the top part which can be anything. i'm obviously not chewbacca.

but i also wasn't 100% sure your name was vanessa. have you seen some of the names folks use in forums?

thanks again.

Vanessa CW21 · 13 April 2014, 02:45 AM

My pleasure. ;)

Sent from my LG-MS770 using Tapatalk

8 April 2014, 12:40 PM	#1
Chewbacca Banned Join Date: May 2012 Real Name: CJ Location: Kashyyyk Watch: Kessel Run Chrono Posts: 21,112	Rolex 16613LV Crown Pos. '1' Free-Winding hello members, got an issue with my 16613LV. just unscrewed the crown to pos. 1 (crown out) and after winding about 10 rotations, it went freespin on me. re-screwed. unscrewed back to pos. 1 and wound properly. tried again to see if i could repeat the original issue, and it went free again. i think it could be a mainspring issue but the watch only has about 2yrs wrist use since new, but has many restarts as i rotate often. its a Z 2006 series. gonna take it to my ad this wknd for a quick assessment but any ideas? thanks in advance.

12 April 2014, 03:11 PM	#3
Vanessa CW21 TechXpert & 2016 Patron Join Date: Aug 2007 Location: Mx Posts: 1,572	Most likely the crown is spinning freely due to the increased tension and probably a lack of grip. Sent from my LG-MS770 using Tapatalk __________________ Member# 5731 Instagram: @vanessa.cw21 Watch my Rolex repair video: https://youtu.be/jDnaotCTpTA

12 April 2014, 10:50 PM	#5
gwozhog "TRF" Member Join Date: Apr 2011 Location: Point Blank, TX Posts: 2,894	I did not know they made a 16613lv. Are you sure its not a 16610lv? __________________ I once dated a girl in high school and her dad told me I would never amount to anything. He was right

12 April 2014, 11:30 PM	#6
Vanessa CW21 TechXpert & 2016 Patron Join Date: Aug 2007 Location: Mx Posts: 1,572	I won't require a service if its the crown. It would only need a new crown. I'm a little confused why you put a question mark by my name? Sent from my LG-MS770 using Tapatalk __________________ Member# 5731 Instagram: @vanessa.cw21 Watch my Rolex repair video: https://youtu.be/jDnaotCTpTA

13 April 2014, 02:45 AM	#9
Vanessa CW21 TechXpert & 2016 Patron Join Date: Aug 2007 Location: Mx Posts: 1,572	My pleasure. ;) Sent from my LG-MS770 using Tapatalk __________________ Member# 5731 Instagram: @vanessa.cw21 Watch my Rolex repair video: https://youtu.be/jDnaotCTpTA

12 April 2014, 02:52 AM	#2
Chewbacca Banned Join Date: May 2012 Real Name: CJ Location: Kashyyyk Watch: Kessel Run Chrono Posts: 21,112	no one huh? will update after a trip to the AD sat.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)