ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
11 May 2014, 03:12 AM | #1 |
"TRF" Member
Join Date: Apr 2014
Real Name: Paul
Location: Montreal,Quebec
Posts: 14
|
Looking for vintage GMT 6542 info
I just managed to purchase a 1958 GMT 6542 with a large arrow 2nd time zone hand and an all blue bezel. It came from the original owner and has the 1030 movement, always serviced at Rolex Toronto. Odd combination with the blue metal bezel and large arrow hand. Has anyone seen anything similar to this over the years ?
|
11 May 2014, 03:26 AM | #2 |
"TRF" Member
Join Date: Sep 2009
Real Name: Rich
Location: NC
Watch: Rolex 1675
Posts: 2,359
|
Service parts from years of use.
Sent from my iPhone using Tapatalk
__________________
Rich Member of Nylon Nation Red Sox Nation Instagram watchguy97 |
11 May 2014, 03:59 AM | #3 |
"TRF" Member
Join Date: Apr 2014
Real Name: Paul
Location: Montreal,Quebec
Posts: 14
|
Definitely will be serviced and cleaned but working great for now as I just bought it days ago. I'm just trying to research the watch as all my searches come up empty.
|
11 May 2014, 04:04 AM | #4 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: May 2011
Location: Great State of TX
Posts: 5,761
|
Where's the all blue bezel insert? I understand those were issued to the Peruvian Air Force, and highly sought after.
And your little hand was probably replaced during a service. Hopefully springer will be along to provide lots more info.
__________________
Forty six & 2 are just ahead of me. Follow me on Instagram @ccrolex |
11 May 2014, 05:36 AM | #5 |
"TRF" Member
Join Date: Apr 2008
Real Name: michael
Location: Florida
Watch: explorer II cream
Posts: 1,664
|
6542 has a faded pepsi insert ie. blue/red. parts of movement have been changed, it should have had a 1030 if memory serves. Sourcing the Bakelite bezel is expensive, 10-20K and very fragile. Dial looks OK but close ups without flash would be better to see.
Small hand is pricey and asking is $600-$1200 for nice ones. Well worth a trip to ABC or other watchmakers for case polish and service. Michael Young can refresh the bracelet and the parts needed (except for Bakelite bezel) are not overwhelming. that's my opinion only. I'd leave the bezel/insert on it and you have a daily wear watch that's cool. M |
11 May 2014, 05:46 AM | #6 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: May 2011
Location: Great State of TX
Posts: 5,761
|
You are certainly correct about the Bakelite bezel belonging on 6542. However, I'm still curious to see the all-blue bezel
__________________
Forty six & 2 are just ahead of me. Follow me on Instagram @ccrolex |
11 May 2014, 11:57 AM | #7 |
"TRF" Member
Join Date: Apr 2014
Real Name: Paul
Location: Montreal,Quebec
Posts: 14
|
After further searching, I found the 1956-1959 GMT Masters had both bakelite and metal bezels as well as small and big arrow second time zone hands. I had the watch dealer inspected and I stand corrected about the all blue bezel as it shows all blue in bright light and in low light will show Pepsi blue and faded red. The dial, hands and bezel are original as well as the 1030 movement.
|
11 May 2014, 12:21 PM | #8 |
"TRF" Member
Join Date: Apr 2014
Real Name: Paul
Location: Montreal,Quebec
Posts: 14
|
Here's the info and a GMT with large arrow hand picture from 1 of 3 Vintage GMT History sites
|
11 May 2014, 01:12 PM | #9 |
2024 SubLV41 Pledge Member
Join Date: Nov 2007
Real Name: Joe
Location: New Mexico
Watch: Explorer
Posts: 12,838
|
The large triangle GMT hand is a later replacement on the 6542
__________________
It's Espresso, not Expresso. Coffee is not a train in Italy. -TRF Member 6982- |
11 May 2014, 01:49 PM | #10 |
Banned
Join Date: Oct 2011
Real Name: Jeff
Location: Home!
Posts: 1,259
|
All the hands are replacements. This would have come with gilt hands with the small 24hr hand as mentioned. Likewise the insert has replaced the Bakelite one. Still nice but it's the difference between a 10k watch and 30k+
Sent from my iPhone using Tapatalk |
11 May 2014, 03:24 PM | #11 |
"TRF" Member
Join Date: Apr 2014
Real Name: Paul
Location: Montreal,Quebec
Posts: 14
|
69
Last edited by Shmitty65; 11 May 2014 at 03:27 PM.. Reason: wrong wording |
11 May 2014, 03:28 PM | #12 | |
2024 SubLV41 Pledge Member
Join Date: Apr 2008
Real Name: jP
Location: Texas
Watch: GMT-MASTER
Posts: 17,308
|
Quote:
__________________
Member of NAWCC since 1990. INSTAGRAM USER NAME: SPRINGERJFP Visit my Instagram page to view some of the finest vintage GMTs anywhere - as well as other vintage classics. |
|
11 May 2014, 09:19 PM | #13 |
TRF Moderator & SubLV41 2024 Patron
Join Date: Oct 2005
Location: .
Watch: 126610LN
Posts: 35,504
|
Those were a 1675 and had an all red GMT hand
__________________
JJ |
11 May 2014, 10:58 PM | #14 |
2024 SubLV41 Pledge Member
Join Date: Nov 2007
Real Name: Joe
Location: New Mexico
Watch: Explorer
Posts: 12,838
|
I'd rather have a nice mint 1675 than a 6542 jammed with service parts.
__________________
It's Espresso, not Expresso. Coffee is not a train in Italy. -TRF Member 6982- |
11 May 2014, 11:25 PM | #15 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: May 2011
Location: Great State of TX
Posts: 5,761
|
In my opinion it's still a very nice watch if the price was right!
__________________
Forty six & 2 are just ahead of me. Follow me on Instagram @ccrolex |
11 May 2014, 11:37 PM | #16 |
"TRF" Member
Join Date: Oct 2009
Location: USA
Watch: Not enough ;-)
Posts: 21,232
|
It's gonna cost a fortune to find the bakelite bezel
I would return it and source another complete and correct matching one Just my .02 HAGOne Sent from my SM-N900T using Tapatalk |
12 May 2014, 12:22 AM | #17 |
"TRF" Member
Join Date: Jan 2008
Real Name: Jeff
Location: Toronto
Posts: 1,947
|
Always nice to see a 6542.
Like the others have said, sadly the hands have been replaced, along with the arrow hand. Originally it came with the small arrow. The large arrow hand never came on the 6542, only introduced on the 1675 in mid to late 60's. The bezel and insert are later replacements as well , but no biggie, as most have been or the the years. |
7 June 2014, 07:55 AM | #18 |
"TRF" Member
Join Date: May 2013
Location: Florida
Posts: 1
|
Sorry to hi-jack the thread but can someone give guidance on where i could view the metal bezel that was used after the bakelite was discontinued?
|
16 June 2014, 11:24 PM | #19 |
"TRF" Member
Join Date: Jun 2014
Location: miami
Watch: 6542 Pepsi
Posts: 1
|
i have just purchased a 6542 1958 Pepsi, the question i have is the date wheel my shows all black dates, i doubt this is correct can some one advise if it can be replaced with the red and black mine also has the larger arrow
|
17 June 2014, 04:48 AM | #20 |
"TRF" Member
Join Date: May 2009
Location: New Zealand
Posts: 1,000
|
Response to richnuts2 ........
Your 6542 would have originally had a 'roulette' date wheel - dates alternating red and black.
The correct date wheels do come up for sale sometimes. Your watch would have originally had a small arrow hand - with all hands gilt finished. Gilt small arrow hands can be found too |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.