ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

firefisher · 1 January 2016, 04:00 PM

How does this one look to you guys?

Happy New Year.

GB

http://www.network54.com/Forum/20767...age/1451367269

AS1 · 1 January 2016, 04:05 PM

it's good and you can absolutely trust this seller who is one of the best

Karbo · 1 January 2016, 05:09 PM

I dont like the tritium dots on this one...

okthenor · 1 January 2016, 06:09 PM

If you can get for 35k range I'd go for it.

Jetkopite · 1 January 2016, 08:07 PM

Yeah I am on the look out for one also and saw this one, its been listed for a while.. Wonder if its to do with the slight damage on the dial and few missing tritium plots..???

TheBluePrince · 1 January 2016, 11:37 PM

Service bezel and pushers. About $5k if you want to change them back to originals.

Jetkopite · 1 January 2016, 11:53 PM

Quote:

Originally Posted by TheBluePrince

Service bezel and pushers. About $5k if you want to change them back to originals.

How do you know if the pushers and bezel are service ones or original? I am looking for a 6263 so I am educating myself with regards to this reference also..

Thanks..

firefisher · 2 January 2016, 12:51 AM

Quote:

Originally Posted by Karbo

I dont like the tritium dots on this one...

I know there are 8 that broke off. Its not in the best of condition.

firefisher · 2 January 2016, 12:55 AM

Quote:

Originally Posted by TheBluePrince

Service bezel and pushers. About $5k if you want to change them back to originals.

Bezel does look new compared to the rest of the watch. Pushers don't bother me.

AzHadEnuf · 2 January 2016, 01:12 AM

Service pushers are referenced on the RSC invoice. Bezel font is different than my 2.8mil SN. But that watch is a little newer.

image.jpg

dcash0615 · 2 January 2016, 01:31 AM

On service pushers they will have a small ridge that circles all the way around the edge of the pusher on the surface of the pusher that is exposed when the screw down is fully tightened. Non-service pushers will not have the ridge. It will be smooth.

Quote:

Originally Posted by Jetkopite

How do you know if the pushers and bezel are service ones or original? I am looking for a 6263 so I am educating myself with regards to this reference also..

Thanks..

Jetkopite · 2 January 2016, 01:46 AM

Quote:

Originally Posted by dcash0615

On service pushers they will have a small ridge that circles all the way around the edge of the pusher on the surface of the pusher that is exposed when the screw down is fully tightened. Non-service pushers will not have the ridge. It will be smooth.

Yeah I just noticed after gong through some pics that some have a light groove and some dont..

How about the insert whats the give away with service and orginal.. Thanks once again for your reply..

TheBluePrince · 2 January 2016, 02:33 AM

Quote:

Originally Posted by Jetkopite

Yeah I just noticed after gong through some pics that some have a light groove and some dont..

How about the insert whats the give away with service and orginal.. Thanks once again for your reply..

There's four "marks" of bezel widely accepted with also small variations within each mark apart from mark four which are all the same and are currently the issued service part and what the watch in question now has. Look at the fonts and spacing on various examples to see the differences.

Jetkopite · 2 January 2016, 02:46 AM

Quote:

Originally Posted by TheBluePrince

There's four "marks" of bezel widely accepted with also small variations within each mark apart from mark four which are all the same and are currently the issued service part and what the watch in question now has. Look at the fonts and spacing on various examples to see the differences.

Excellent thank you very much....

scooba · 2 January 2016, 03:53 AM

As above the tritium plots some are missing ,Seams a common problem but at $36k priced accordingly ,

firefisher · 3 January 2016, 10:04 AM

I'm between this 6263 and a 6239 I looked at the other day. I am supposed to have the case opened and inspect the movement next week on the 6239.

IMG_0845.JPG[/IMG]

TheBluePrince · 3 January 2016, 10:22 AM

Here, try this -

http://www.rolexforums.com/showthread.php?t=451136

firefisher · 3 January 2016, 11:51 AM

Here are the pictures of the 6239. The clasp is not original, the hand in the register located at 9 o'clock is bent and the case was polished. The difference between the two is $10,000. Which one would you guys suggest getting?

watch.jpg.jpg

watch2 . jpg.jpg

watch3 jpg.jpg

watch4 jpg.jpg

watch5 jpg.jpg

watch6 jpg.jpg

watch7 jpg.jpg

firefisher · 3 January 2016, 12:01 PM

Quote:

Originally Posted by TheBluePrince

Here, try this -

http://www.rolexforums.com/showthread.php?t=451136

Very nice watch. I'll keep it in mind for sure. Like it

1 January 2016, 04:00 PM	#1
firefisher "TRF" Member Join Date: Mar 2014 Location: New York Watch: 98 Daytona Zenith Posts: 79	Daytona 6263 Reference How does this one look to you guys? Happy New Year. GB http://www.network54.com/Forum/20767...age/1451367269

1 January 2016, 05:09 PM	#3
Karbo "TRF" Member Join Date: May 2011 Location: Paris, France Watch: Dayto/5164 Posts: 1,631	I dont like the tritium dots on this one... __________________ IG : @aka_karbo

2 January 2016, 01:12 AM	#10
AzHadEnuf "TRF" Member Join Date: Nov 2014 Real Name: Ralph Location: Tucson, Arizona Watch: 6263,DJ,SUB,BB,THR Posts: 2,043	Service pushers are referenced on the RSC invoice. Bezel font is different than my 2.8mil SN. But that watch is a little newer. image.jpg __________________ "The only reason for time is so that everything doesn't happen at once." -A. Einstein

3 January 2016, 10:04 AM	#16
firefisher "TRF" Member Join Date: Mar 2014 Location: New York Watch: 98 Daytona Zenith Posts: 79	I'm between this 6263 and a 6239 I looked at the other day. I am supposed to have the case opened and inspect the movement next week on the 6239. IMG_0845.JPG[/IMG] Last edited by firefisher; 3 January 2016 at 10:06 AM.. Reason: can't upload picture

1 January 2016, 04:05 PM	#2
AS1 "TRF" Member Join Date: Mar 2014 Location: NYC / Milan Watch: 6263 Posts: 3,938	it's good and you can absolutely trust this seller who is one of the best

1 January 2016, 06:09 PM	#4
okthenor "TRF" Member Join Date: Sep 2014 Location: Dallas, TX Posts: 202	If you can get for 35k range I'd go for it.

1 January 2016, 08:07 PM	#5
Jetkopite "TRF" Member Join Date: Feb 2013 Real Name: Andy Location: Dubai Watch: 5131R,6263,5712T Posts: 1,559	Yeah I am on the look out for one also and saw this one, its been listed for a while.. Wonder if its to do with the slight damage on the dial and few missing tritium plots..???

1 January 2016, 11:37 PM	#6
TheBluePrince "TRF" Member Join Date: Dec 2009 Location: London Posts: 2,081	Service bezel and pushers. About $5k if you want to change them back to originals.

2 January 2016, 03:53 AM	#15
scooba 2024 Pledge Member Join Date: Oct 2008 Location: Europe Watch: Anything Posts: 2,585	As above the tritium plots some are missing ,Seams a common problem but at $36k priced accordingly ,

3 January 2016, 10:22 AM	#17
TheBluePrince "TRF" Member Join Date: Dec 2009 Location: London Posts: 2,081	Here, try this - http://www.rolexforums.com/showthread.php?t=451136

3 January 2016, 11:51 AM	#18
firefisher "TRF" Member Join Date: Mar 2014 Location: New York Watch: 98 Daytona Zenith Posts: 79	Here are the pictures of the 6239. The clasp is not original, the hand in the register located at 9 o'clock is bent and the case was polished. The difference between the two is $10,000. Which one would you guys suggest getting? watch.jpg.jpg watch2 . jpg.jpg watch3 jpg.jpg watch4 jpg.jpg watch5 jpg.jpg watch6 jpg.jpg watch7 jpg.jpg

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)