ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Diego Hidalgo · 17 June 2016, 05:46 AM

Hello,

I would like to know opinions about this armis 62510 H.

Set in marking 555 endlink...

And the crooked crown closure.

Some pictures and thanks in advance.

Regards

Diego Hidalgo · 17 June 2016, 07:18 AM

Ups

Enviado desde mi SM-N915FY mediante Tapatalk

Gina Marie · 17 June 2016, 09:13 AM

no bueno

Diego Hidalgo · 17 June 2016, 08:25 PM

Thanks, more opinions please...

Enviado desde mi SM-N915FY mediante Tapatalk

2JHead · 17 June 2016, 10:08 PM

nope

harry in montreal · 17 June 2016, 10:55 PM

I think you should study and handle a few 62510h bands. Go on eBay. The one above is not good. The stamping on the real ones are crisp and clean. You can feel the weight of the machines; Centered And detailed. The one above was made in China.

Diego Hidalgo · 18 June 2016, 12:31 AM

Thanks, I figured it was false but wanted to contrast.

Regards

Enviado desde mi SM-N915FY mediante Tapatalk

luxwatches308 · 18 June 2016, 12:32 AM

That´s a total Fake my friend, its wrong in every way!!, to many wrong things to list, but I will like to add a few ones: crown not centered on the clasp, the stamp and font totally incorrect, that same end link is been sold on ebay from wholesalers that sell aftermarket parts, it has the same font and size, and just bad quality. Both stamped plates are shorter than what it suppose to be, and what is patented registered!! thats totally wrong!! where is the swiss made?? I could go on and on!!.. was this sold to you as authentic?
my veredict is obvious

luxwatches308 · 18 June 2016, 05:21 AM

[QUOTE]FAKE FAKE FAKE, can't say it any clearer. First of all the crown on the clasp is not centered, rolex would never sell anything off centered like that. The plates where are engraved are smaller than original, font is wrong, the patented registered is totally wrong (where is the swiss made!?) stamping is poor quality and the size type of font is wrong. There are codes missing on the plates also. The end links are totally wrong, the 555 stamp are way to large
And the 5 font is wrong, those sell of ebay by wholesalers and are aftermarket. There is no doubt that is a chinese fake. Did you get it sold to you as an original?

crowncollection · 18 June 2016, 07:46 AM

No good

Sent from my iPhone using Tapatalk

GGGMT · 18 June 2016, 12:56 PM

Niet

jvmartin · 18 June 2016, 03:09 PM

A decent attempt... but fake nonetheless

joe100 · 26 June 2016, 04:08 PM

Not even a good one. Some 62510H bracelets are so close, you have to look at the scrollwork in the clasp.

17 June 2016, 05:46 AM	#1
Diego Hidalgo "TRF" Member Join Date: Feb 2009 Location: España Posts: 58	Armis Jubilee 62510 "help" Hello, I would like to know opinions about this armis 62510 H. Set in marking 555 endlink... And the crooked crown closure. Some pictures and thanks in advance. Regards

18 June 2016, 12:32 AM	#8
luxwatches308 "TRF" Member Join Date: Dec 2012 Location: California Posts: 2	Fake as a 3 dollar bill!! That´s a total Fake my friend, its wrong in every way!!, to many wrong things to list, but I will like to add a few ones: crown not centered on the clasp, the stamp and font totally incorrect, that same end link is been sold on ebay from wholesalers that sell aftermarket parts, it has the same font and size, and just bad quality. Both stamped plates are shorter than what it suppose to be, and what is patented registered!! thats totally wrong!! where is the swiss made?? I could go on and on!!.. was this sold to you as authentic? my veredict is obvious

18 June 2016, 07:46 AM	#10
crowncollection "TRF" Member Join Date: Jan 2011 Real Name: David Location: australia Posts: 20,215	No good Sent from my iPhone using Tapatalk __________________ watches many

26 June 2016, 04:08 PM	#13
joe100 2024 SubLV41 Pledge Member Join Date: Nov 2007 Real Name: Joe Location: New Mexico Watch: Explorer Posts: 12,838	Not even a good one. Some 62510H bracelets are so close, you have to look at the scrollwork in the clasp. __________________ It's Espresso, not Expresso. Coffee is not a train in Italy. -TRF Member 6982-

17 June 2016, 07:18 AM	#2
Diego Hidalgo "TRF" Member Join Date: Feb 2009 Location: España Posts: 58	Ups Enviado desde mi SM-N915FY mediante Tapatalk

17 June 2016, 09:13 AM	#3
Gina Marie "TRF" Member Join Date: Jul 2015 Location: USA Baby! Posts: 1,068	no bueno

17 June 2016, 08:25 PM	#4
Diego Hidalgo "TRF" Member Join Date: Feb 2009 Location: España Posts: 58	Thanks, more opinions please... Enviado desde mi SM-N915FY mediante Tapatalk

17 June 2016, 10:08 PM	#5
2JHead "TRF" Member Join Date: Aug 2014 Location: Western Europe Posts: 609	nope

17 June 2016, 10:55 PM	#6
harry in montreal "TRF" Member Join Date: Jan 2009 Location: Montreal Watch: The Habs pick 1st! Posts: 3,589	I think you should study and handle a few 62510h bands. Go on eBay. The one above is not good. The stamping on the real ones are crisp and clean. You can feel the weight of the machines; Centered And detailed. The one above was made in China.

18 June 2016, 12:31 AM	#7
Diego Hidalgo "TRF" Member Join Date: Feb 2009 Location: España Posts: 58	Thanks, I figured it was false but wanted to contrast. Regards Enviado desde mi SM-N915FY mediante Tapatalk

18 June 2016, 05:21 AM	#9
luxwatches308 "TRF" Member Join Date: Dec 2012 Location: California Posts: 2	[QUOTE]FAKE FAKE FAKE, can't say it any clearer. First of all the crown on the clasp is not centered, rolex would never sell anything off centered like that. The plates where are engraved are smaller than original, font is wrong, the patented registered is totally wrong (where is the swiss made!?) stamping is poor quality and the size type of font is wrong. There are codes missing on the plates also. The end links are totally wrong, the 555 stamp are way to large And the 5 font is wrong, those sell of ebay by wholesalers and are aftermarket. There is no doubt that is a chinese fake. Did you get it sold to you as an original?

18 June 2016, 12:56 PM	#11
GGGMT 2024 SubLV41 Pledge Member Join Date: Aug 2013 Location: Itinerant Watch: 79010sg Posts: 8,329	Niet

18 June 2016, 03:09 PM	#12
jvmartin "TRF" Member Join Date: Feb 2014 Location: Los Angeles Posts: 2,349	A decent attempt... but fake nonetheless

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)