ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

AckAck · 23 August 2017, 05:18 AM

Quote:

Originally Posted by texex91

Whatever Ack. You should have sent into RM to have them take care of it--but you chose not too.

I appreciate you trying to make some deal out of this...but all it required was you sending in. Simple. You didn't and sold the watch.

So now what 6 months later you're complaining?

Zzzzzzz

It's just a goof. Like you do in the Patek thread... It's all in good spirit.

mask1196 · 23 August 2017, 05:18 AM

Quote:

Originally Posted by texex91

Well guacamole was not put on by RM

absolutely not

texex91 · 23 August 2017, 05:19 AM

Quote:

Originally Posted by AckAck

It's just a goof. Like you do in the Patek thread... It's all in good spirit.

Back to 5522 watching and waiting...

jschmidtdmd · 23 August 2017, 05:29 AM

Again- I saw these marks on my 11-03 RG which came to me sealed.

It is not a defect. It is simply part of production on these watches, I am sure of it.

texex91 · 23 August 2017, 05:31 AM

Quote:

Originally Posted by jschmidtdmd

Again- I saw these marks on my 11-03 RG which came to me sealed.

It is not a defect. It is simply part of production on these watches

We agree on that.

Hey I thought this was the pic thread, not the crying thread.

Who has some pics? John any crop circle 035's?

Elliott some bank shots?

Wish Roger had a defective Tourb he could post.

AckAck · 23 August 2017, 05:31 AM

Quote:

Originally Posted by jschmidtdmd

Again- I saw these marks on my 11-03 RG which came to me sealed.

It is not a defect. It is simply part of production on these watches, I am sure of it.

Something needs to change then, shouldn't have visible marks, at least for my liking. I'm sure others couldn't care less but if I'm spending 100k+ the watch should be produced with no blemishes. They need to change this part of production in my opinion...

texex91 · 23 August 2017, 05:34 AM

Quote:

Originally Posted by AckAck

Something needs to change then, shouldn't have visible marks, at least for my liking. I'm sure others couldn't care less but if I'm spending 100k+ the watch should be produced with no blemishes. They need to change this part of production in my opinion...

Give it up Ack...good news I don't think you're buying any more, so don't worry.

Can't please everyone.

AckAck · 23 August 2017, 05:35 AM

Quote:

Originally Posted by texex91

Give it up Ack...

We can't discuss this? You'd be all over this in the Patek section..

jschmidtdmd · 23 August 2017, 05:38 AM

I only have the 35-02 here at the office today :(

Maybe I will take a group shot later this week with the new 35.

texex91 · 23 August 2017, 05:39 AM

Quote:

Originally Posted by AckAck

We can't discuss this? You'd be all over this in the Patek section..

I did discuss and made my point. Have at your game Ack, makes no difference to me.

jschmidtdmd · 23 August 2017, 05:40 AM

Quote:

Originally Posted by AckAck

Something needs to change then, shouldn't have visible marks, at least for my liking. I'm sure others couldn't care less but if I'm spending 100k+ the watch should be produced with no blemishes. They need to change this part of production in my opinion...

It doesn't bother me at all and like I said it has been present on almost all of my RMs I believe

texex91 · 23 August 2017, 05:40 AM

Quote:

Originally Posted by jschmidtdmd

I only have the 35-02 here at the office today :(

Maybe I will take a group shot later this week with the new 35.

AckAck · 23 August 2017, 05:40 AM

Quote:

Originally Posted by texex91

Give it up Ack...good news I don't think you're buying any more, so don't worry.

Can't please everyone.

Your a car guy. How would you feel if you bought a brand new Ferrari and the paint was off or blemished?

texex91 · 23 August 2017, 05:42 AM

Quote:

Originally Posted by AckAck

Your a car guy. How would you feel if you bought a brand new Ferrari and the paint was off or blemished?

I would send it back to the dealer to fix. Simple.

Not complain 6-8 months after I sold it.

Now, I'm done bantering with you as it's a waste of time

mask1196 · 23 August 2017, 06:14 AM

Quote:

Originally Posted by texex91

Elliott some bank shots?

Since you asked......

texex91 · 23 August 2017, 06:15 AM

Nice Elliott!

conkers · 23 August 2017, 08:32 AM

Quote:

Originally Posted by texex91

Wish Roger had a defective Tourb he could post.

Since you brought it up, my 22 NTPT. Repaired and sold. No drama no tears - disappointing on a 500k watch of course but it happens.

texex91 · 23 August 2017, 08:36 AM

Is Forsey back from service (I recall you mentioning it was in)?

Hope to see RM slip it's way between the AP's in the future.

Hairdude1 · 23 August 2017, 08:46 AM

Quote:

Originally Posted by mask1196

Since you asked......

Nice!

Hairdude1 · 23 August 2017, 08:46 AM

Quote:

Originally Posted by texex91

Nice Elliott!

Stunning Paul!

conkers · 23 August 2017, 09:10 AM

Quote:

Originally Posted by texex91

Is Forsey back from service (I recall you mentioning it was in)?

Hope to see RM slip it's way between the AP's in the future.

GF should be back soon from service.

AckAck · 23 August 2017, 09:58 AM

Quote:

Originally Posted by conkers

Since you brought it up, my 22 NTPT. Repaired and sold. No drama no tears - disappointing on a 500k watch of course but it happens.

Roger what happened with your 22?

texex91 · 23 August 2017, 10:05 AM

Quote:

Originally Posted by Hairdude1

Stunning Paul!

Thank you my friend

conkers · 23 August 2017, 10:58 AM

Quote:

Originally Posted by AckAck

Roger what happened with your 22?

A screw from the movement fell out. Fortunately it didn't fall into the tourbillon carriage or it would have been very messy. I didn't have the heart to tell Mr Papi when I had lunch with him as he is such a lovely gentleman. These things happen they are hand made mechanical devices after all.

texex91 · 23 August 2017, 11:03 AM

Quote:

Originally Posted by conkers

A screw from the movement fell out. Fortunately it didn't fall into the tourbillon carriage or it would have been very messy. I didn't have the heart to tell Mr Papi when I had lunch with him as he is such a lovely gentleman. These things happen they are hand made mechanical devices after all.

He makes your high end AP movements as well...so be nice

Agree though, after having lunch with him, I too found him quite the gentleman (and honestly a genius).

A3MED · 23 August 2017, 01:24 PM

I have these circles on my 35-01 and didnt think anything of them until today. I just thought it was dust collecting on the sides but I guess not. Do i have to send it in?

lapince · 23 August 2017, 07:27 PM

Quote:

Originally Posted by jschmidtdmd

Again- I saw these marks on my 11-03 RG which came to me sealed.

It is not a defect. It is simply part of production on these watches, I am sure of it.

Are you sure John? Haven't seen any pics taken under microscope of any RM, maybe at X100 magnification they are really crappy, always great fun when a PP owner does it and writes a thread, who goes first?

. Couldn't believe the one where it was X100

AckAck · 23 August 2017, 09:45 PM

Quote:

Originally Posted by A3MED

I have these circles on my 35-01 and didnt think anything of them until today. I just thought it was dust collecting on the sides but I guess not. Do i have to send it in?

No, there are no issues, whatsoever. Just take a Bounty paper towel and wipe it off. It is completely normal for your watch to come like this from the factory. No one cares but a few people so it's non discussion in an open forum. Everything is perfect with your watch. Sorry, but we aren't allowed to discuss any possible issues here, it must be all positive reinforcement for the brand.

texex91 · 23 August 2017, 09:57 PM

Quote:

Originally Posted by A3MED

I have these circles on my 35-01 and didnt think anything of them until today. I just thought it was dust collecting on the sides but I guess not. Do i have to send it in?

Well that says it all--you didn't notice them. RM's come with a 5 year warranty, so take it back to your AD and have them send to RM. What is the big deal? Unlike Ack, who sold 8 months ago and is crying now. Or better yet, just sell it, that way someone can enjoy it.

Quote:

Originally Posted by AckAck

No, there are no issues, whatsoever. Just take a Bounty paper towel and wipe it off. It is completely normal for your watch to come like this from the factory. No one cares but a few people so it's non discussion in an open forum. Everything is perfect with your watch. Sorry, but we aren't allowed to discuss any possible issues here, it must be all positive reinforcement for the brand.

Ack grow up. You've gone on and on for three pages now.

First this is a PICTURE THREAD-- (it's not a discussion thread).

Second, you sold your watch what 8 months ago and you're crying/trolling now?

Third, this is normal. If someone doesn't like it, send it to RM (something you refused to do). They will 'fix it'.

Fourth, I've owned 7 RM's (several twice) and zero issues. None.

If you have an issue and want to troll (and not even an owner), start a thread saying RM sucks.

This says it all...

Quote:

Originally Posted by AckAck

Uh oh QC problems at RM!!!! Call the cavalry! Everyone hop in the thread and bash now!!

AckAck · 23 August 2017, 10:38 PM

Quote:

Originally Posted by texex91

Well that says it all--you didn't notice them. RM's come with a 5 year warranty, so take it back to your AD and have them send to RM. What is the big deal? Unlike Ack, who sold 8 months ago and is crying now. Or better yet, just sell it, that way someone can enjoy it.

Ack grow up. You've gone on and on for three pages now.

First this is a PICTURE THREAD-- (it's not a discussion thread).

Second, you sold your watch what 8 months ago and you're crying/trolling now?

Third, this is normal. If someone doesn't like it, send it to RM (something you refused to do). They will 'fix it'.

Fourth, I've owned 7 RM's (several twice) and zero issues. None.

If you have an issue and want to troll (and not even an owner), start a thread saying RM sucks.

This says it all...

This says it all...

It's called, sarcasm. In reference to when you "troll" the QC issues in the Patek section.

23 August 2017, 05:29 AM	#3904
jschmidtdmd "TRF" Member Join Date: Jan 2010 Real Name: John Location: Denver Posts: 2,294	Again- I saw these marks on my 11-03 RG which came to me sealed. It is not a defect. It is simply part of production on these watches, I am sure of it. __________________ Watches!

23 August 2017, 05:38 AM	#3909
jschmidtdmd "TRF" Member Join Date: Jan 2010 Real Name: John Location: Denver Posts: 2,294	I only have the 35-02 here at the office today :( Maybe I will take a group shot later this week with the new 35. __________________ Watches!

23 August 2017, 06:15 AM	#3916
texex91 "TRF" Member Join Date: May 2007 Location: . Posts: 17,898	Nice Elliott!

23 August 2017, 08:36 AM	#3918
texex91 "TRF" Member Join Date: May 2007 Location: . Posts: 17,898	Is Forsey back from service (I recall you mentioning it was in)? Hope to see RM slip it's way between the AP's in the future.

23 August 2017, 01:24 PM	#3926
A3MED "TRF" Member Join Date: Nov 2015 Real Name: Ahmed Location: Abu Dhabi / LA Posts: 294	I have these circles on my 35-01 and didnt think anything of them until today. I just thought it was dust collecting on the sides but I guess not. Do i have to send it in?

Currently Active Users Viewing This Thread: 8 (0 members and 8 guests)