Glass fogged??!!

[Tomas Eriksson]

Originally Posted by APAP

The exact same thing happened to my CE diver a couple of years back. Please look for my threads and you’ll find it. I’d posted a picture of it as well.

It turned out to be a bad gasket that was replaced under warranty - mine was still under warranty and even got a 2 years extension.

Seems to be a defect with this model. I presume yours is out of warranty?

Do you know what gasket that failed?

[Burlington]

Originally Posted by Tomas Eriksson

Do you know what gasket that failed?

Original post referenced the crown tube.

Will you enquire to AP about a proactive repair for your CE diver ?

[V25V]

Originally Posted by Burlington

Original post referenced the crown tube.

Will you enquire to AP about a proactive repair for your CE diver ?

I just had my FC diver serviced and it spent over a week in the water in the Caribbean. No issues at all.


Sent from my iPhone using Tapatalk Pro

[exiger77]

Originally Posted by Tomas Eriksson

Do you know what gasket that failed?

Yes, no more warranty. I am heading to SC later.

[exiger77]

Originally Posted by V25V

Sent from my iPhone using Tapatalk Pro

Yes, this is the same watch. If one day of pool day dated in 2014, will cause such a defect, it will be quite obvious what the problem was. In the beginning of the post, what I was referring when I say I was not Swimming was recent usage before this issue turned up.

Hope it clarifies.

[V25V]

Originally Posted by exiger77

Yes, this is the same watch. If one day of pool day dated in 2014, will cause such a defect, it will be quite obvious what the problem was. In the beginning of the post, what I was referring when I say I was not Swimming was recent usage before this issue turned up.



Hope it clarifies.

Yeah, certainly should not and like I mentioned above, I had my CF diver in pools/ocean for over a week and no issues. This was about a week after receiving back from APSC for service. I tend to think AP will take care of it since it's service appears to be documented. Keep us posted, photo below of mine while in the Caribbean.






Sent from my iPhone using Tapatalk Pro

[benlee]

Originally Posted by exiger77

Brand new from Taipei Boutique. I am the first and only owner. The crowns are not loose or whatsoever. I a careful wearer as well. I am heading to my local SC tomorrow. I am not sure it’s moisture, but it looks blurry like some kind of oil layer inside it.. :(

How is this possible? As far as I know the ceramic diver has been discontinued for a while. Or you mean AP boutique in Taipei selling you a NOS?

[tyler1980]

ok so am i following?..

bought 2014-ish new from a boutique
pressure test 2016 (as the old warranty extension required a pressure test at year 2 to get an additional 1 year of warranty)
water in the case 2018, no warranty


FWIW a pressure test is recommended every year.

[RolexZen]

Any follow-up, @exiger77?

[exiger77]

Originally Posted by RolexZen

Any follow-up, @exiger77?

Watch was serviced by APSC. So far so good. Issue no longer there.

[RolexZen]

Originally Posted by exiger77

Watch was serviced by APSC. So far so good. Issue no longer there.

That’s good to hear. Did they cover it as faulty, or charge you? If so, what was the cost?