ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

danielburgon · 4 October 2010, 12:43 AM

If not, is it possible to put a ceramic bezel insert in instead?
thanks in advance.

The GMT Master · 4 October 2010, 12:53 AM

No, the housing and size of the bezel isn't compatible. Sorry

Caraptor · 4 October 2010, 12:55 AM

I'm pretty sure that's going to be a no. The bezels from the 14060M and 16610 weren't interchangeable, so I seriously doubt that the 116610 would work either. There's a slight size difference.

padi56 · 4 October 2010, 01:15 AM

Quote:

Originally Posted by danielburgon

If not, is it possible to put a ceramic bezel insert in instead?
thanks in advance.

Short answer no and just cannot think of any good reason to do so, and even if you could and re-machine the 14060m case. You would be looking at $1400 plus for bezel and insert and then end up with a bezel that functions the same as the old one.

HL65 · 4 October 2010, 01:35 AM

No!

EchoBlueUK · 4 October 2010, 01:44 AM

100% no - the machining process is completely different even though the overall look is similar.

4 October 2010, 12:43 AM	#1
danielburgon "TRF" Member Join Date: Sep 2010 Location: stroud Watch: 1974 air king Posts: 6	Can you put a new ceramic bezel onto a 14060m If not, is it possible to put a ceramic bezel insert in instead? thanks in advance.

4 October 2010, 01:35 AM	#5
HL65 TRF Moderator & 2024 SubLV41 Patron Join Date: Dec 2007 Real Name: Ken Location: SW Florida Watch: One on my wrist. Posts: 63,989	No! __________________ *SPEM SUCCESSUS ALIT*

4 October 2010, 12:53 AM	#2
The GMT Master "TRF" Member Join Date: Jul 2008 Real Name: Chris Location: England Posts: 8,150	No, the housing and size of the bezel isn't compatible. Sorry

4 October 2010, 12:55 AM	#3
Caraptor Member Join Date: Sep 2010 Location: North Carolina Watch: me save for it. Posts: 444	I'm pretty sure that's going to be a no. The bezels from the 14060M and 16610 weren't interchangeable, so I seriously doubt that the 116610 would work either. There's a slight size difference.

4 October 2010, 01:44 AM	#6
EchoBlueUK "TRF" Member Join Date: May 2009 Location: UK Posts: 1,543	100% no - the machining process is completely different even though the overall look is similar.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)