ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

DOUBLE 0 SE7EN · 4 October 2010, 05:40 AM

Dear friends;
When I put my GMT MASTER IIc on my watchwinder the watch stops after 46 hours.. But the watchwinder still works...
But when I put my datejust on my same watchwinder the datejust continues to work for weeks... What is the problem with my GMT IIc while it is on the winder? Is it too heavy for the winder? I really need your thoughts..they are really important..thanks very much...

HL65 · 4 October 2010, 05:42 AM

It is not too heavy. What kind of winder do you have?

DOUBLE 0 SE7EN · 4 October 2010, 05:47 AM

Quote:

Originally Posted by SteelerFan1965

It is not too heavy. What kind of winder do you have?

It doesn't have a name..I bought from Bangkok for 80 dolars or something..It is strange it has more than 900 turns a day and it winds the datejust perfectly but fails to wind the gmtIIc..isn't it strange? It has 60 turns on 1 hour..

HL65 · 4 October 2010, 05:52 AM

It should work fine. Make sure watch is securley on pad and touching bottom. I use an Orbita now and have very heavy platinum watches on it --works fine--GMT not that heavy of a watch. It is a bit strange assuming nothing is wrong with winding mechanism on the watch itself.

yemenmocha · 4 October 2010, 05:53 AM

Try adjusting the angle that the watch sits on the winder (rotate it on the pad). My OMEGA doesn't like the standard display angle.

DOUBLE 0 SE7EN · 4 October 2010, 06:00 AM

I will try them..Thanks very much..I will inform you..

Rolesor · 4 October 2010, 08:20 AM

sounds like an angle issue to me too! keep us posted my friend.

DesertDogs · 4 October 2010, 09:11 AM

I have a Daytona that does the same thing. Will not work on any of our four winders but every other Rolex works fine.

So I just have to set the time whenever I want to wear it.

MortgageGuy · 4 October 2010, 11:39 AM

Hum, I have never had a problem and I always have at least 3 on the wider... I have had all 3 GMT Ceramics (YG, SS and a TT) and they all were on there and never a problem...

jrssv · 4 October 2010, 11:58 AM

I had that problem with my GMT IIc too. I got very upset until I discovered I had turned the winder off!

4 October 2010, 05:40 AM	#1
DOUBLE 0 SE7EN "TRF" Member Join Date: Jan 2010 Real Name: KAAN Location: ISTANBUL Watch: Explorer-PAM233 Posts: 1,645	Strange Issue with my Rolexes on the watchwinder.... Dear friends; When I put my GMT MASTER IIc on my watchwinder the watch stops after 46 hours.. But the watchwinder still works... But when I put my datejust on my same watchwinder the datejust continues to work for weeks... What is the problem with my GMT IIc while it is on the winder? Is it too heavy for the winder? I really need your thoughts..they are really important..thanks very much...

4 October 2010, 05:42 AM	#2
HL65 TRF Moderator & 2024 SubLV41 Patron Join Date: Dec 2007 Real Name: Ken Location: SW Florida Watch: One on my wrist. Posts: 63,985	It is not too heavy. What kind of winder do you have? __________________ *SPEM SUCCESSUS ALIT*

4 October 2010, 05:52 AM	#4
HL65 TRF Moderator & 2024 SubLV41 Patron Join Date: Dec 2007 Real Name: Ken Location: SW Florida Watch: One on my wrist. Posts: 63,985	It should work fine. Make sure watch is securley on pad and touching bottom. I use an Orbita now and have very heavy platinum watches on it --works fine--GMT not that heavy of a watch. It is a bit strange assuming nothing is wrong with winding mechanism on the watch itself. __________________ *SPEM SUCCESSUS ALIT*

4 October 2010, 05:53 AM	#5
yemenmocha "TRF" Member Join Date: Jul 2007 Location: Arizona Watch: SS & TT Daytonas Posts: 471	Try adjusting the angle that the watch sits on the winder (rotate it on the pad). My OMEGA doesn't like the standard display angle. __________________ Day-Date President, Champagne Dial SS Daytona Black Dial TT Daytona Slate Dial Omega Railmaster Tudor Submariner

4 October 2010, 08:20 AM	#7
Rolesor "TRF" Member Join Date: May 2009 Real Name: Brandon Location: Toronto, ON Watch: 116234 Posts: 4,150	sounds like an angle issue to me too! keep us posted my friend. __________________ 116234 - Blue Concentric Dial - Fluted Bezel - Oyster Bracelet Tudor Black Bay 54 - Rubber Strap

4 October 2010, 06:00 AM	#6
DOUBLE 0 SE7EN "TRF" Member Join Date: Jan 2010 Real Name: KAAN Location: ISTANBUL Watch: Explorer-PAM233 Posts: 1,645	I will try them..Thanks very much..I will inform you..

4 October 2010, 09:11 AM	#8
DesertDogs "TRF" Member Join Date: Nov 2006 Real Name: Jan Location: AZ Watch: Everose Daytona Posts: 491	I have a Daytona that does the same thing. Will not work on any of our four winders but every other Rolex works fine. So I just have to set the time whenever I want to wear it. __________________ WG Sub (2014) Everose Day/Date Meteorite (2015) Everose Daytona (2011) YG - Submariner Serti Dial (M Series)/DayDate II (V Series)/Daytona Black Dia Dial (D Series) TT - DJII (V Series)/YM Blue Dial (D Series)/YM Mid-Size Slate Dial (D Series) SS - DJII (V Series)/Daytona (2011)/Sub LV (M Series)/YM Plat&SS (M Series)/GMT Pepsi (78)

4 October 2010, 11:39 AM	#9
MortgageGuy "TRF" Member Join Date: Jun 2009 Real Name: Adam Location: Orlando, Florida Watch: Me Posts: 9,935	Hum, I have never had a problem and I always have at least 3 on the wider... I have had all 3 GMT Ceramics (YG, SS and a TT) and they all were on there and never a problem... __________________ The richest people in the world look for and build NETWORKS, Everyone else looks for work... Robert Kiyosaki

4 October 2010, 11:58 AM	#10
jrssv Member Join Date: Oct 2009 Location: Arizona Posts: 386	I had that problem with my GMT IIc too. I got very upset until I discovered I had turned the winder off!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)