The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Forum > Other (non-Rolex) Watch Topics > Ω Omega Discussion Forum

Reply
 
Thread Tools Display Modes
Old 14 February 2012, 10:06 AM   #1
AAMD11
"TRF" Member
 
AAMD11's Avatar
 
Join Date: Feb 2010
Real Name: Illusive Man
Location: NYC
Watch: Omega Worldtimer
Posts: 668
Question on a little issue

I bought my Seamaster 222080 from a trusted fellow TRF member. Watch is great and running in excellent condition -1 +1 on a daily basis. He said it was previously serviced at an Omega AD abot 5-6 months ago by the previous owner. Which is great considering I dont have to service it in a few years. However, my issue is that this AD did a sloppy job in the cleaning. On the inside of the saphirre crsyrtal you can see cloth streaks (you know as if you cleaned it with a dirty cloth) It is only noticeable when the light hits it at a certain angle though. It is on the whole crystal, man that gets to me!!! What can I do to get this fixed? Do I call Omega? This irritates me and again, it is NOT the TRF members fault but that AD that did this sloppy job!
__________________
AAMD11 is offline   Reply With Quote
Old 14 February 2012, 10:33 AM   #2
Dan2010
"TRF" Member
 
Dan2010's Avatar
 
Join Date: Apr 2010
Location: South Carolina
Watch: Panerai 914
Posts: 6,540
Yes, that would irritate me too. I would take it to a watch maker or send it off to Omega. I couldn't live with that.
Dan2010 is offline   Reply With Quote
Old 14 February 2012, 11:11 AM   #3
Gharddog03
"TRF" Member
 
Gharddog03's Avatar
 
Join Date: Dec 2009
Real Name: Genaro
Location: Fresno Ca.
Watch: R O L E X
Posts: 4,466
Send it to a trusted local WM and have it cleaned.
Gharddog03 is offline   Reply With Quote
Old 14 February 2012, 11:16 AM   #4
AAMD11
"TRF" Member
 
AAMD11's Avatar
 
Join Date: Feb 2010
Real Name: Illusive Man
Location: NYC
Watch: Omega Worldtimer
Posts: 668
How much does this usually run at to send it to a local WM?
__________________
AAMD11 is offline   Reply With Quote
Old 14 February 2012, 11:17 AM   #5
Kringkily
"TRF" Member
 
Kringkily's Avatar
 
Join Date: Aug 2011
Real Name: George
Location: New York
Watch: Speedmaster, Rolex
Posts: 3,082
you can open up the watch, remove the movement and wipe down with a microfiber no lint cloth. I got a speedmaster back from an Omega service center and had the same issue as you.
Kringkily is offline   Reply With Quote
Old 14 February 2012, 11:20 AM   #6
AAMD11
"TRF" Member
 
AAMD11's Avatar
 
Join Date: Feb 2010
Real Name: Illusive Man
Location: NYC
Watch: Omega Worldtimer
Posts: 668
I dont have the tools to open this watch, and I dont want to mess it up
__________________
AAMD11 is offline   Reply With Quote
Old 14 February 2012, 11:23 AM   #7
azguy
Banned
 
Join Date: Sep 2011
Real Name: -------
Location: -------
Watch: ---------
Posts: 12,609
Find your local Omega AD and see what they have to say, maybe they have someone on staff that can do it or worst case they can give you a referral to a local guy

Keep us posted
azguy is offline   Reply With Quote
Old 14 February 2012, 11:28 AM   #8
AAMD11
"TRF" Member
 
AAMD11's Avatar
 
Join Date: Feb 2010
Real Name: Illusive Man
Location: NYC
Watch: Omega Worldtimer
Posts: 668
I just called the local AD (they sell Rolex, Omega, Breitling Bell & Ross, Panerai etc.) and they said they could do it, they have their own repair and watch maker. They will let me know tomrrow how much, the sales rep guestimated $100!!!! Just for that!!!
__________________
AAMD11 is offline   Reply With Quote
Old 14 February 2012, 11:29 AM   #9
warrior
"TRF" Member
 
Join Date: Feb 2009
Location: massachusetts
Watch: Explorer
Posts: 1,691
If you have one close to you, I'd try going to an Omega Boutique. Either they should have a watchmaker on hand who could fix the issue...or they could have it sent to a service center.
warrior is offline   Reply With Quote
Old 14 February 2012, 11:36 AM   #10
AAMD11
"TRF" Member
 
AAMD11's Avatar
 
Join Date: Feb 2010
Real Name: Illusive Man
Location: NYC
Watch: Omega Worldtimer
Posts: 668
The closest Boutique to me is in Phoenix, and it is still 370 miles away
__________________
AAMD11 is offline   Reply With Quote
Old 14 February 2012, 11:58 AM   #11
AAMD11
"TRF" Member
 
AAMD11's Avatar
 
Join Date: Feb 2010
Real Name: Illusive Man
Location: NYC
Watch: Omega Worldtimer
Posts: 668
Update: I called the Omega boutique in Phoenix, I explained the issue and the Omega representative said that it sounds like the anti reflective coating might of been wiped off hence the streaks. I didnt know this watch (SMP 2220.80) had the anti reflective coating on it. I thought that was just with the Planet Ocean? Anyway, he told me to call the main office in New Jersey and they can ship a box to me have it shipped insudred over there and they can make estimates on it, he said that there may be a chance the crystal has to get replaced and it will run to $200. If I decide not to get it done I dont pay anything and they will ship the watch back.
__________________
AAMD11 is offline   Reply With Quote
Old 20 February 2012, 03:57 AM   #12
Mickey®
Banned
 
Join Date: Aug 2011
Real Name: Mickey®
Location: Atlanta, GA
Watch: Swiss Made
Posts: 5,801
Can you post a pic? I bet we can tell you if it is the AR or a dirty rag etc.

I had a MK40 that had the AR coating rubbed off as well as a PO. Hated to look at them.
I fixed the Speedmaster and sold it immediately. I hope to never buy another watch with AR on the outside again.

This ebay auction shows damaged AR coating...confirmed with seller too.
http://cgi.ebay.com/ws/eBayISAPI.dll...m=140702495316



I miss that 3520.53...just a tad too small for my liking...

Mickey® is offline   Reply With Quote
Old 20 February 2012, 04:18 AM   #13
azguy
Banned
 
Join Date: Sep 2011
Real Name: -------
Location: -------
Watch: ---------
Posts: 12,609
I've been in the boutique in Phoenix, def no watch maker in their 500 sqft of mall space.

It'll be way more sending it to Omega, I'd trust your local AD and see how they do, maybe it'll be just wipe marks and they'll take care of you

Keep us posted
azguy is offline   Reply With Quote
Old 20 February 2012, 11:21 AM   #14
AAMD11
"TRF" Member
 
AAMD11's Avatar
 
Join Date: Feb 2010
Real Name: Illusive Man
Location: NYC
Watch: Omega Worldtimer
Posts: 668
I had it taken care of, took it to the AD. They wiped it down and cleaned it up, it was indeed in the interior of the crystal. They did as good a job as they could. Also got rid of the lint that was on the dial. The crystal is not perfect as there is a little left on the left side but its no where near as noticeable as it was before so I can live with it until I go to the mega Boutique in NYC. BTW total charge was $92!! just for that, oh well I have spent money on worse stuff out there, like taking women out to eat and then tell me later thay are seeing someone else!
__________________
AAMD11 is offline   Reply With Quote
Old 21 February 2012, 01:05 AM   #15
azguy
Banned
 
Join Date: Sep 2011
Real Name: -------
Location: -------
Watch: ---------
Posts: 12,609
Good news, for high end Swiss watches $92 is cheap
azguy is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Asset Appeal

Wrist Aficionado

DavidSW Watches

Takuya Watches

My Watch LLC

OCWatches


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.