ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolesor · 19 March 2013, 03:49 AM

Hey guys!

I tried pm'ing Etur (Eugene I believe) and his inbox is full. Does anyone know if there is another way to contact him to purchase his end links?

Any help is appreciated

MonBK · 19 March 2013, 03:52 AM

Get in line.

mjclark32 · 19 March 2013, 03:56 AM

Try posting on his profile?

Rolesor · 19 March 2013, 05:29 AM

Haha thanks

acr · 21 March 2013, 11:54 PM

Same here, I can't post on his profile either though... anybody have a set of endlinks for a 16613 available??? haha

Grissom · 26 March 2013, 09:34 AM

I'm going to try getting ahold of him tonight or tomorrow and will let him know folks here are looking for him for some of his end links, and I'll advise him to clean out his mail box.

mikkibarry · 26 March 2013, 10:28 AM

Thanks, Grissom. I sent email and have no response yet. I need them for at least 2 pieces. need need need

Private · 28 March 2013, 08:53 AM

Me too! Grissom, remember to tell him that i'm first in the queue!

Cheers
Gordon

mikkibarry · 28 March 2013, 09:17 AM

Are there any similar "services?"

Grissom · 31 March 2013, 11:24 AM

Just spoke with Eugene, and he asked me to let everyone know that he has been very busy with work, and as such, has taken a little "vacation" from making these end links. He thinks that he may have some time to make a few sets beginning in either the middle of April, or the beginning of May. He will also try and clear out his mailbox. He appreciates the interest, and asked that folks be patient, as this is basically a "hobby" for him......he actually has a full time job and a family that he needs to pay attention to, as well.

Mistry · 3 April 2013, 11:02 PM

Quote:

Originally Posted by Grissom

Just spoke with Eugene, and he asked me to let everyone know that he has been very busy with work, and as such, has taken a little "vacation" from making these end links. He thinks that he may have some time to make a few sets beginning in either the middle of April, or the beginning of May. He will also try and clear out his mailbox. He appreciates the interest, and asked that folks be patient, as this is basically a "hobby" for him......he actually has a full time job and a family that he needs to pay attention to, as well.

sounds good

thanks for the help

hope to hear from him soon

TattooedGQ · 3 April 2013, 11:09 PM

Yeah it took the guy like 3 months to get back to me.....the end links are nifty, but not worth being ignored for months.

tomprade · 4 April 2013, 06:44 PM

thanks grissom we will wait for him then
*

stalenhag · 8 April 2013, 11:16 PM

I have paid for two sets but no response what so ever in approx 6 weeks...

My patience is wearing thin :(

Etur · 10 April 2013, 12:29 AM

Hello All,

Sorry for the late response, I am still swamped with the work and personal issues.....

I have cleaned my TRF inbox so I will try to respond to the PM’s.

I am still planning to re-start production by the end of next week.

Please be patient since I can only make them on weekends.

Thank you all for interest and patient!

Eugene.

Mistry · 23 April 2013, 01:28 PM

Quote:

Originally Posted by Etur

Hello All,

Sorry for the late response, I am still swamped with the work and personal issues.....

I have cleaned my TRF inbox so I will try to respond to the PM’s.

I am still planning to re-start production by the end of next week.

Please be patient since I can only make them on weekends.

Thank you all for interest and patient!

Eugene.

Great stuff. Appreciate your help :)

Look forward to hearing from you.

Mistry

HockeyBrand · 27 April 2013, 07:01 AM

Thanks Etur. Hoping to receive a PM reply as well. :)

ttmedical · 29 April 2013, 05:30 PM

Quote:

Originally Posted by HockeyBrand

Thanks Etur. Hoping to receive a PM reply as well. :)

+1 Can't wait to hear back! I've been staring at pictures of other TRF members who have these end links and can't wait to add a strap to my daytona!

dxlx · 4 May 2013, 12:05 PM

Hi Etur

I would like to order a set of endlinks each for 116520 and 116710.

please let me know how i can pay and ship to the below address.
drop me an email at danny@rcbbuild.com.sg to confirm.

Name: VP1100956 danny lim
Address Line 1: 17230 NE Sacramento Street
Address Line 2: Suite VP1100956
City: Portland
State: Oregon
Zip: 97230
Telephone: (503) 736 5916

thanks

turkz1 · 9 May 2013, 09:38 PM

Hi Eugene,

I wanted to get in line for a couple of these beauties as well. I have an Oyster Precision 6426 with a 19mm lug width and an SS datejust 16014 with a 20mm lug width. My location is Australia, hope that's not a problem. Looking forward to hearing from you. I tried to pm you but couldn't get through.

Cheers
Michael

sparkyoliver · 22 May 2013, 01:06 AM

your mailbox is full...please add me to the list...stainless steel datejust 16030 with 20mm lugs

accce · 22 May 2013, 01:10 AM

I also would like a set for a SS Daytona 116520.

sampelligrino · 23 May 2013, 09:53 AM

Also hoping to get on the list for a set of end links, tried PM but was full. Thanks!

mikkibarry · 23 May 2013, 10:01 AM

Yeah, bunches of us are still waiting. Does anyone know of any commercial sources or have plans or anything like that?

Smartyjones18 · 3 June 2013, 12:15 AM

Practically I've given up contacting Eugene, he did reply me in March and promised to get back to me once he's started production, but after 3 more emails from me, I've yet to get a reply from him, I believed he must be preoccupied other personal matters.

I decided by commissioning my goldsmith a pair of solid gold end links for my daydate and should be receiving in about 2 weeks time. Will update once I gotten it.

HockeyBrand · 18 August 2013, 09:35 AM

Maybe this watchfan can get backing and all if us frustrated with the endlink problem will have a steady source to go to :/

https://www.kickstarter.com/projects...rolex-on-a-str

19 March 2013, 03:49 AM	#1
Rolesor "TRF" Member Join Date: May 2009 Real Name: Brandon Location: Toronto, ON Watch: 116234 Posts: 4,150	Etur's end links - can't get ahold of him! Hey guys! I tried pm'ing Etur (Eugene I believe) and his inbox is full. Does anyone know if there is another way to contact him to purchase his end links? Any help is appreciated __________________ 116234 - Blue Concentric Dial - Fluted Bezel - Oyster Bracelet Tudor Black Bay 54 - Rubber Strap

19 March 2013, 03:56 AM	#3
mjclark32 "TRF" Member Join Date: Mar 2010 Real Name: MJC Location: PHL USA Watch: IWC, Rolex, AP Posts: 29,232	Try posting on his profile? __________________

19 March 2013, 05:29 AM	#4
Rolesor "TRF" Member Join Date: May 2009 Real Name: Brandon Location: Toronto, ON Watch: 116234 Posts: 4,150	Haha thanks __________________ 116234 - Blue Concentric Dial - Fluted Bezel - Oyster Bracelet Tudor Black Bay 54 - Rubber Strap

26 March 2013, 09:34 AM	#6
Grissom "TRF" Member Join Date: Oct 2010 Real Name: Nathan Location: US, Latin America Watch: GMT IIc 18K/SS Posts: 3,349	I'm going to try getting ahold of him tonight or tomorrow and will let him know folks here are looking for him for some of his end links, and I'll advise him to clean out his mail box. __________________ *(Member NAWCC since 1976)* 116713LN GMT-IIc 18k/SS (Z) + 116520 SS Daytona (M) + 16700 GMT Master (A) + 16610LV Submariner (V) + 16600 Sea Dweller (Z) + 116400 Milgauss White Dial (V) + 70330N Tudor Heritage Chronograph Grey w/Black Sub Dials (J) + 5513 Submariner Serif Dial (5.2 Mil) Who else needs an Intervention? (109 297) (137 237) (73 115) (221) (23) (56) (229) P-Club Member #5 RIP JJ Irani - TRF Legend

26 March 2013, 10:28 AM	#7
mikkibarry "TRF" Member Join Date: Dec 2012 Real Name: Mikki Location: Northern Virginia Watch: Your Six Posts: 1,146	Thanks, Grissom. I sent email and have no response yet. I need them for at least 2 pieces. need need need __________________ No Matter Where You Go - There You Are (and so's your Rolex) Card Carrying Chinese Crested Owner

19 March 2013, 03:52 AM	#2
MonBK Banned Join Date: Nov 2010 Location: Kingstown Posts: 58,279	Get in line.

21 March 2013, 11:54 PM	#5
acr "TRF" Member Join Date: Dec 2012 Real Name: Mo Location: Tampa Bay Watch: GMT Posts: 280	Same here, I can't post on his profile either though... anybody have a set of endlinks for a 16613 available??? haha

28 March 2013, 08:53 AM	#8
Private "TRF" Member Join Date: Mar 2013 Location: UK Posts: 3	Me too! Grissom, remember to tell him that i'm first in the queue! Cheers Gordon

28 March 2013, 09:17 AM	#9
mikkibarry "TRF" Member Join Date: Dec 2012 Real Name: Mikki Location: Northern Virginia Watch: Your Six Posts: 1,146	Are there any similar "services?" __________________ No Matter Where You Go - There You Are (and so's your Rolex) Card Carrying Chinese Crested Owner

31 March 2013, 11:24 AM	#10
Grissom "TRF" Member Join Date: Oct 2010 Real Name: Nathan Location: US, Latin America Watch: GMT IIc 18K/SS Posts: 3,349	Just spoke with Eugene, and he asked me to let everyone know that he has been very busy with work, and as such, has taken a little "vacation" from making these end links. He thinks that he may have some time to make a few sets beginning in either the middle of April, or the beginning of May. He will also try and clear out his mailbox. He appreciates the interest, and asked that folks be patient, as this is basically a "hobby" for him......he actually has a full time job and a family that he needs to pay attention to, as well. __________________ *(Member NAWCC since 1976)* 116713LN GMT-IIc 18k/SS (Z) + 116520 SS Daytona (M) + 16700 GMT Master (A) + 16610LV Submariner (V) + 16600 Sea Dweller (Z) + 116400 Milgauss White Dial (V) + 70330N Tudor Heritage Chronograph Grey w/Black Sub Dials (J) + 5513 Submariner Serif Dial (5.2 Mil) Who else needs an Intervention? (109 297) (137 237) (73 115) (221) (23) (56) (229) P-Club Member #5 RIP JJ Irani - TRF Legend

3 April 2013, 11:09 PM	#12
TattooedGQ "TRF" Member Join Date: Nov 2009 Real Name: Justin Location: NY, USA Watch: yo self! Posts: 2,686	Yeah it took the guy like 3 months to get back to me.....the end links are nifty, but not worth being ignored for months. __________________ That boy's got the Devil in him. Rolex: I think I'm up to 9?? Omega: Got a few of those too. Breitling: And some of these.

4 April 2013, 06:44 PM	#13
tomprade "TRF" Member Join Date: Apr 2013 Location: paris Posts: 1	thanks grissom we will wait for him then *

8 April 2013, 11:16 PM	#14
stalenhag "TRF" Member Join Date: Nov 2007 Location: planet earth Posts: 243	I have paid for two sets but no response what so ever in approx 6 weeks... My patience is wearing thin :(

10 April 2013, 12:29 AM	#15
Etur "TRF" Member Join Date: Dec 2010 Real Name: Eugene Location: Atlanta GA Posts: 121	Hello All, Sorry for the late response, I am still swamped with the work and personal issues..... I have cleaned my TRF inbox so I will try to respond to the PM’s. I am still planning to re-start production by the end of next week. Please be patient since I can only make them on weekends. Thank you all for interest and patient! Eugene.

27 April 2013, 07:01 AM	#17
HockeyBrand Member Join Date: Jul 2008 Location: Burnaby Posts: 265	Thanks Etur. Hoping to receive a PM reply as well. :)

4 May 2013, 12:05 PM	#19
dxlx "TRF" Member Join Date: Apr 2013 Location: singapore Posts: 2	endlinks for 116520 and 116710 Hi Etur I would like to order a set of endlinks each for 116520 and 116710. please let me know how i can pay and ship to the below address. drop me an email at danny@rcbbuild.com.sg to confirm. Name: VP1100956 danny lim Address Line 1: 17230 NE Sacramento Street Address Line 2: Suite VP1100956 City: Portland State: Oregon Zip: 97230 Telephone: (503) 736 5916 thanks

9 May 2013, 09:38 PM	#20
turkz1 "TRF" Member Join Date: May 2013 Real Name: Michael N. Location: Melbourne, Au Posts: 4	Hi Eugene, I wanted to get in line for a couple of these beauties as well. I have an Oyster Precision 6426 with a 19mm lug width and an SS datejust 16014 with a 20mm lug width. My location is Australia, hope that's not a problem. Looking forward to hearing from you. I tried to pm you but couldn't get through. Cheers Michael

22 May 2013, 01:06 AM	#21
sparkyoliver "TRF" Member Join Date: May 2011 Location: USA Posts: 6	your mailbox is full...please add me to the list...stainless steel datejust 16030 with 20mm lugs

22 May 2013, 01:10 AM	#22
accce "TRF" Member Join Date: Mar 2013 Location: Chevy Chase Watch: WG Daytona Posts: 1,088	I also would like a set for a SS Daytona 116520.

23 May 2013, 09:53 AM	#23
sampelligrino "TRF" Member Join Date: Sep 2012 Location: USA Posts: 1,207	Also hoping to get on the list for a set of end links, tried PM but was full. Thanks!

23 May 2013, 10:01 AM	#24
mikkibarry "TRF" Member Join Date: Dec 2012 Real Name: Mikki Location: Northern Virginia Watch: Your Six Posts: 1,146	Yeah, bunches of us are still waiting. Does anyone know of any commercial sources or have plans or anything like that? __________________ No Matter Where You Go - There You Are (and so's your Rolex) Card Carrying Chinese Crested Owner

3 June 2013, 12:15 AM	#25
Smartyjones18 "TRF" Member Join Date: Feb 2013 Location: Singapore Posts: 769	Practically I've given up contacting Eugene, he did reply me in March and promised to get back to me once he's started production, but after 3 more emails from me, I've yet to get a reply from him, I believed he must be preoccupied other personal matters. I decided by commissioning my goldsmith a pair of solid gold end links for my daydate and should be receiving in about 2 weeks time. Will update once I gotten it.

18 August 2013, 09:35 AM	#26
HockeyBrand Member Join Date: Jul 2008 Location: Burnaby Posts: 265	Maybe this watchfan can get backing and all if us frustrated with the endlink problem will have a steady source to go to :/ https://www.kickstarter.com/projects...rolex-on-a-str

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)