ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

lipjin · 4 October 2013, 04:10 PM

Hi guys, need some forum advice

Ran my new 1 week old ROC chronograph for around 40mins today (I forgot it was running) and when I stopped and reset the chronograph, the chrono hand jumped to the 55sec mark!

Naturally I panicked and forgot to take pictures - After fiddling about with it a couple of times more, starting and resetting the chrono 3 times it finally reset to zero.

Has anyone else encountered this issue? Called AP service center and they mentioned it may be due to the oils in the chrono not distributed evenly. I'm currently running the chrono again trying to recreate the problem.

Any advice would be great.

jvo300 · 5 October 2013, 12:29 AM

I would keep running it until you can reproduce the issue. Then send it in for service under warranty (without resetting the chrono). If you are unable to reproduce it, then you have no problem!

Viv Savage · 5 October 2013, 07:06 AM

Is the reset pusher fully unscrewed? If not, the Chrono sweep hand does not properly reset.

kilyung · 5 October 2013, 09:30 AM

Happened to me also. Just send it to Clearwater and they'll fix it.

blakeegan · 5 October 2013, 12:48 PM

Can confirm. Same thing happened to me because the pusher wasn't fully unscrewed when I went to reset.

4 October 2013, 04:10 PM	#1
lipjin "TRF" Member Join Date: Apr 2013 Location: HK Watch: AP ROC, Nautilus Posts: 1,657	26320 Chronograph doesn't reset to zero? Hi guys, need some forum advice Ran my new 1 week old ROC chronograph for around 40mins today (I forgot it was running) and when I stopped and reset the chronograph, the chrono hand jumped to the 55sec mark! Naturally I panicked and forgot to take pictures - After fiddling about with it a couple of times more, starting and resetting the chrono 3 times it finally reset to zero. Has anyone else encountered this issue? Called AP service center and they mentioned it may be due to the oils in the chrono not distributed evenly. I'm currently running the chrono again trying to recreate the problem. Any advice would be great. __________________ "We must use time wisely and forever realize that the time is always ripe to do right" -Nelson Mandela "It is not our abilities that show what we truly are. It is our choices" -Dumbledore Instagram: horolj_

5 October 2013, 12:29 AM	#2
jvo300 "TRF" Member Join Date: Sep 2009 Location: TX Posts: 1,897	I would keep running it until you can reproduce the issue. Then send it in for service under warranty (without resetting the chrono). If you are unable to reproduce it, then you have no problem!

5 October 2013, 07:06 AM	#3
Viv Savage "TRF" Member Join Date: Aug 2009 Real Name: Ed Location: Australia Watch: Rolex, PP, AP, JLC Posts: 612	Is the reset pusher fully unscrewed? If not, the Chrono sweep hand does not properly reset.

5 October 2013, 09:30 AM	#4
kilyung "TRF" Member Join Date: Jul 2009 Location: Cave Watch: Sundial Posts: 33,950	Happened to me also. Just send it to Clearwater and they'll fix it.

5 October 2013, 12:48 PM	#5
blakeegan Banned Join Date: Apr 2013 Location: San Francisco Watch: 5905P, 5711 Posts: 119	Can confirm. Same thing happened to me because the pusher wasn't fully unscrewed when I went to reset.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)