ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
14 December 2021, 12:14 AM | #1 |
"TRF" Member
Join Date: Mar 2018
Location: Boston
Watch: 116710LN
Posts: 196
|
Warranty Claim w/ Modified (Brushed) Bracelet
Hi all,
Unfortunately, experiencing a weird issue with my 116710LN GMT that cropped up over the weekend. I'm not entirely sure what's wrong, but the watch won't run for more than a few minutes if it's left sitting on a table. Interestingly, if it's worn on my wrist, it'll usually last a bit longer, but inevitably I sit still for long enough and it'll stop again. I've tried winding the crown 40-50 turns to no effect, so I imagine it's more complicated than an issue with the autowinding mechanism. I can't think of anything that would have caused this to begin happening - I wore the watch Friday, woke up on Saturday morning, and it had stopped around 7:30am. The watch is from early 2018 and is still under warranty - my local AD advised that it would likely be sent to RSC Dallas. The only reason that I'm a bit reluctant to send it in is because in 2019, I sent the bracelet out to Rolliworks to refinish the polished center links. The watch looks awesome as is, but I'm not sure how Rolex will handle this when they receive it in its current condition. The dealer said that they might (a) not say anything and return the watch unpolished as requested, (b) restore it to original factory specifications by polishing the bracelet (and presumably the case as well), or (c) require me to purchase a new bracelet. I plan to give call the RSC later today once they're open to confirm their official policy, but wanted to get some input on what I might expect if I sent it in. In general, I've heard pretty good things about the Dallas service center, but if they're going to give me a hard time, then I'm open to just having the watch repaired locally at my own expense. |
14 December 2021, 12:18 AM | #2 |
"TRF" Member
Join Date: Nov 2019
Location: UK
Posts: 6,631
|
Just send it in on a NATO - I don’t think it would matter.
|
14 December 2021, 12:22 AM | #3 |
2024 SubLV41 Pledge Member
Join Date: Feb 2014
Real Name: Mike
Location: NH
Watch: 116400GV 124060
Posts: 1,192
|
I'm pretty sure you have the option to send it to RSC in Dallas without the bracelet. That was the option I had when I sent in my Tudor BB GMT to repair the date issue.
|
14 December 2021, 12:22 AM | #4 |
2024 SubLV41 Pledge Member
Join Date: Jan 2013
Location: Miami
Watch: me lose count.
Posts: 5,891
|
Yes, as the previous poster recommended, the best solution is to send on a non Rolex strap of any sort (but not a copy of a Rolex style strap). This will avoid questions, or worse, bringing your bracelet back to OEM specs during free service polish.
__________________
♛ 218206 Roman ♛ 116689 ♛ 126710BLRO ♛ 16520 white ♛ 16523 white ♛ 16610 ♛ 5513 Birth Year - ✠ Patek Philippe 5980/1R-001 - AP 26331ST Panda - Panerai Bronzo 671 & 111, Ω Speedmaster 1957 Broad Arrow, Cartier Santos XL - Montblanc TimeWalker Chrono 41 |
14 December 2021, 12:25 AM | #5 |
"TRF" Member
Join Date: Mar 2014
Location: Kuala Lumpur
Posts: 1,018
|
I've serviced my watch at other RSCs and though I've never requested it to not be polished I believe it is an option and they shouldn't be giving you a hard time. Either way it's best to just call and ask. Nice brushed look indeed! Good luck!
__________________
Two-Factor Authentication Enabled |
14 December 2021, 12:25 AM | #6 |
"TRF" Member
Join Date: Dec 2017
Real Name: Andrew
Location: 🇬🇧
Watch: SD4K, PO 2500
Posts: 93
|
You've done exactly what I would have done with a watch with PCLs. Remove the strap and hand in just the watch head. Always use crown cost to fix rather than dipping into you own pocket for warranty work.
|
14 December 2021, 12:27 AM | #7 |
"TRF" Member
Join Date: Mar 2018
Location: Boston
Watch: 116710LN
Posts: 196
|
Have you guys sent watches into Rolex without the bracelet? I asked the service guy at my AD if I could do that and he told me that they would require me to purchase a new bracelet.
|
14 December 2021, 01:05 AM | #8 |
2024 Pledge Member
Join Date: Mar 2015
Location: USA
Watch: Rolex/AP/PP/ALS
Posts: 6,000
|
Just refinish the polished center links should not be any issue.
Tell RSC to leave the bracelet alone, don't polish it.
__________________
Rolex: 116621, 126333, 126711CHNR, 114060, 116500LN White, 126660 JC, 126710BLNR, 126710BLRO, 116610LV, 126610LN, 126610LV, 116508 YG Green Dial, 124300 Turquoise, 126719BLRO Meteorite dial, 228235 Olive dial ,126755SARU, 116505 RG Black dial, 326934 Blue Sky D. AP: 15451ST Blue, 15500OR w/Bracelet, 14790SA, 14790BA, 26022BC(Salmon) PP: 5524R, 5712G, ALS: Time Zone 136.032, Cartier: WGSA0030, WSSA0061, YG Oct. 2965, Carree 2961, YG Carree, Tank W5000156 Breguet: 7137BA, MontBlanc: 109996" |
14 December 2021, 01:15 AM | #9 |
TRF Moderator & 2024 SubLV41 Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,494
|
One, it may not be covered under warranty if it is determined that it was damaged, causing the issue.
Two, Rolex does not usually refinish the watch during a warranty repair, if that is what this is. Occasionally they do a courtesy full service that could include this, so you should make it clear that you do not want anything refinished. They would never require you to buy a new bracelet. If you did send it in on a non-Rolex strap, they would simply not re-install that strap. Nothing wrong with using a good independent if you want more control on what is happening to your watch, and a quick turn-around time.
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
14 December 2021, 01:25 AM | #10 |
2024 SubLV41 Pledge Member
Join Date: Feb 2017
Location: IAH
Watch: GMT(s) & Sub
Posts: 290
|
I sent my 1675 in for service through my AD this fall without a bracelet, and was told RSC Dallas required a bracelet. Worked out well for me as I wanted an oyster to go along with the jubilee, so just made the purchase.
|
14 December 2021, 01:51 AM | #11 |
"TRF" Member
Join Date: Mar 2018
Location: Boston
Watch: 116710LN
Posts: 196
|
Thanks for the good data point. I guess if they make me buy a new bracelet then I probably wouldn't lose any money flipping it (I'm sure someone out there is after one). That said, I don't really want to have to deal with it.
|
14 December 2021, 04:11 AM | #12 |
"TRF" Member
Join Date: Jun 2011
Real Name: Ron
Location: Arizona, USA
Watch: 116233
Posts: 3,180
|
Several years ago I wanted to brush the PCLs on a new GMTII I had. I called Dallas RSC first. The representative I spoke with insisted this would "ruin the watch" and I was a fool to even consider it. As for service, she said they would restore the PCLs unless I specified not to. I had it brushed by an AD, was quite pleased with the look, but as it turned out, never needed to have it serviced before selling it a year later.
__________________
so many Rolexes.....so little time |
14 December 2021, 04:18 AM | #13 |
Banned
Join Date: Dec 2017
Location: USA
Posts: 885
|
I called RSC and spoke Alana.
"For new watches with modern calibers it must have a "complaint bracelet" when it leaves RSC after the service" for "vintage" they do not although you will get a quote for the "correct bracelet". You do not have to purchase for Vintage. So if you send in a new model without one you are either buying a bracelet for them to install after the service...or shipping them the correct Rolex bracelet that came with the watch at time of purchase. Something about ensuring the "integrity" of the new model. Phone: (833) 765-3900 Don't kill the messenger. LOL |
14 December 2021, 04:42 AM | #14 |
"TRF" Member
Join Date: Oct 2011
Real Name: Jason
Location: Essex, UK
Watch: 14060M
Posts: 2,943
|
Very different to here
My RSC confirmed they would reattach any bracelet or strap, as long as it was safe/secure..
__________________
|
14 December 2021, 04:45 AM | #15 | |
Banned
Join Date: Dec 2017
Location: USA
Posts: 885
|
Quote:
I can't find it and it might have been on another forum but some one just went thru this and was complaining about it. They made him send his bracelet in. |
|
14 December 2021, 04:54 AM | #16 |
"TRF" Member
Join Date: Mar 2018
Location: Boston
Watch: 116710LN
Posts: 196
|
I called them as well and they confirmed that since it's a "modern caliber", if I sent in the watch head only, I would be required to purchase a bracelet for $1,900 in order for them to service it. I guess I'll just do that - if I don't want it, there's no shortage of demand from people who want a new one.
Seems like a ridiculous policy. |
14 December 2021, 05:15 AM | #17 | |
Banned
Join Date: Dec 2017
Location: USA
Posts: 885
|
Quote:
|
|
14 December 2021, 05:30 AM | #18 |
"TRF" Member
Join Date: Aug 2018
Location: Varies
Posts: 339
|
Does compliant bracelet mean that one could order a super jubilee :-) ? I think that it fits this watch? I saw some pics of a Daytona on a super jubilee and it looked quite nice. It’s not “factory,” but it is 100% Rolex so I wonder if that counts as compliant?
|
14 December 2021, 05:37 AM | #19 | |
Banned
Join Date: Dec 2017
Location: USA
Posts: 885
|
Quote:
Stretching but I'm sure "could have come with" is also possible...e.g DJ41 with Oyster or Jubilee one could easily say AD did the swap at time of sale I believe. But I haven't read the find print. |
|
14 December 2021, 05:39 AM | #20 | |
"TRF" Member
Join Date: Mar 2021
Location: USA
Posts: 1,442
|
Quote:
__________________
♛16610 ♛116655 ♛116619 AP 15400 ♛228238 |
|
14 December 2021, 05:52 AM | #21 | |
2024 SubLV41 Pledge Member
Join Date: Aug 2009
Location: New England
Posts: 3,741
|
Quote:
Seems like a good work around for the Rolex parts shortage in the marketplace Sent from my iPhone using Tapatalk
__________________
Current watches: 116718ln, 116500 black dial, 40mm Breitling Chronomat MOP dial “A man with one watch always knows what time it is. A man with two watches is never sure.” |
|
14 December 2021, 05:54 AM | #22 | |
2024 SubLV41 Pledge Member
Join Date: Aug 2009
Location: New England
Posts: 3,741
|
Quote:
It is quite a nice combo Sent from my iPhone using Tapatalk
__________________
Current watches: 116718ln, 116500 black dial, 40mm Breitling Chronomat MOP dial “A man with one watch always knows what time it is. A man with two watches is never sure.” |
|
14 December 2021, 06:05 AM | #23 | |
Banned
Join Date: Dec 2017
Location: USA
Posts: 885
|
Quote:
I spoke to Nita and she said that if you send in a PCL bracelet that is correct for the watch and you've had the PCL's brushed and if it was done by a "Rolex service center and or by an AD" - "It would depend on the quality of the work done". I didn't think she quite understood the fact that the PCL were now no longer "polished" so... I then pressed her and said "well how could "my father in law" have had it done "correctly" if the RSC does not do this service and that is not correct for this model". She said "ah good point let me get clarification" and put me on hold to speak a Lead Service Technician who confirmed that "if it was done by an AD it "should be" fine and that they would have to see the watch to 100% confirm". They said they will call and discuss with the customer once they evaluate the bracelet. Sounds like to me it will be a battle for some reason because she just couldn't say that its ok to send the watch back after a RSC visit without it being to spec... I said I understood everything she's told me from her Tech but it doesn't make sense because you allow people to say "do not polish bracelet" and she said that is correct. Put on hold again and she came back and said "the lead technician said that as long as they can evaluate all the parts/links of the bracelet are 100% Rolex then a note to NOT polish bracelet can be put in the work order". She advised to make sure this was also noted on the paper work when the watch and bracelet is shipped. So what's the difference between a beat up bracelet and one with PCL's brushed...the world may never know. |
|
14 December 2021, 06:12 AM | #24 |
"TRF" Member
Join Date: Mar 2020
Location: USA
Posts: 796
|
Do you know anyone you could trade your bracelet for a PCL and then swap back once the service is complete?
|
14 December 2021, 06:16 AM | #25 | |
"TRF" Member
Join Date: Apr 2010
Location: Monaro, NSW
Posts: 846
|
Quote:
I have done this on purpose because I wanted a Glidelock bracelet to wear with my five-digit Sub. Because they are scarce, you could sell it at a profit like the watch, so why not go down this road anyway? |
|
14 December 2021, 06:30 AM | #26 | |
"TRF" Member
Join Date: Mar 2018
Location: Boston
Watch: 116710LN
Posts: 196
|
Quote:
I didn't tell them that the bracelet had been brushed - I just told them it's in storage since I've been wearing the watch on a different strap and I don't have access to it at the moment. |
|
14 December 2021, 06:41 AM | #27 | |
Banned
Join Date: Dec 2017
Location: USA
Posts: 885
|
Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.