ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
|
|
Thread Tools | Display Modes |
25 July 2023, 09:32 AM | #1 |
"TRF" Member
Join Date: May 2009
Real Name: John
Location: Midwest
Watch: 5513,1675,216570
Posts: 1,505
|
Has anyone gotten pushback from an RSC to for being super picky on accuracy?
Just wondering. Sending it in when 3 s/day fast?
|
25 July 2023, 09:57 AM | #2 |
Banned
Join Date: May 2012
Real Name: CJ
Location: Kashyyyk
Watch: Kessel Run Chrono
Posts: 21,112
|
Not really. My 32xx is within COSC but it ticks backwards. So they said it’s fine.
|
25 July 2023, 10:40 AM | #3 |
"TRF" Member
Join Date: Jan 2021
Location: Australia
Watch: Panerai PAM687
Posts: 762
|
If its within COSC I doubt they'll be receptive.
If its within Spec, its within Spec Let me honest, were talking about it gaining 18min per year (assuming you wear it everyday and dont have to reset if for DST/travel)
__________________
If you cant afford the depreciation, you cant afford the purchase |
25 July 2023, 11:27 AM | #4 |
"TRF" Member
Join Date: Mar 2012
Location: Brisbane
Watch: DSSD
Posts: 8,053
|
I've never had any problems and I've had 3 watches at the same time that were set up by Rolex so that they would run + or - 0 seconds per day for weeks at a time whilst on rotation but within reasonable tolerances and wavering very slightly.
Currently, I have two that are within the Superlative Chronometer spec and one has not changed since new 12 years ago and it was a COSC spec era watch. I Imagine that if I asked nicely, that Rolex would be able to happily tweak these two a little bit. If a watch is healthy there is no reason why one should not ask the question but a fast watch is very much easier to manage by simply hacking the movement or setting it slightly behind time so that it will catch up. |
25 July 2023, 12:23 PM | #5 |
"TRF" Member
Join Date: Mar 2021
Real Name: Rafeeq
Location: Ye Midwest
Watch: Datejust 41
Posts: 523
|
At +3 sec I myself just wouldn't start. Now, I confess that when my DJ41 was at -4.5 per day--and probably sliding further, as I had started at +2 only 14 months earlier--then it was time to call RSC. At this they were completely understanding and did the service without quibble.
|
25 July 2023, 12:35 PM | #6 |
"TRF" Member
Join Date: Mar 2014
Location: New Jersey
Watch: Explorer II
Posts: 232
|
You're concerned about 3 seconds per day? Mechanical watches may not be for you.
|
25 July 2023, 12:53 PM | #7 |
2024 SubLV41 Pledge Member
Join Date: Apr 2013
Location: NL
Watch: Yachtmaster
Posts: 14,736
|
You can’t blame them if they turn you down over this imho
__________________
Day Date 18238, Yachtmaster 16622, Deepsea 116660, Submariner 116619, SkyD 326935, DJ 178271, DJ 69158, Yachtmaster 169622, GMT 116713LN, GMT 126711. |
25 July 2023, 01:33 PM | #8 |
2024 SubLV41 Pledge Member
Join Date: Dec 2010
Real Name: PaulG
Location: Georgia
Posts: 41,904
|
The time away from one’s wrist isn’t worth super pickiness methinks.
Sent from my iPhone using Tapatalk Pro
__________________
Does anyone really know what time it is? |
25 July 2023, 02:06 PM | #9 |
"TRF" Member
Join Date: Nov 2020
Location: USA
Posts: 332
|
I don‘t know. I wouldn‘t send it in for +3, unless it had low amplitude, but that‘s a running slow issue, AFAIK. I think my levels would be -4 or +5 (for a -2/+2 watch).
|
25 July 2023, 02:10 PM | #10 |
2024 Pledge Member
Join Date: Jul 2010
Location: USA
Posts: 3,926
|
I don’t think I wear any one watch long enough to notice time gain/loss
|
25 July 2023, 04:24 PM | #11 |
"TRF" Member
Join Date: May 2019
Location: Uk
Watch: RolexGMT/Tudor7928
Posts: 4,177
|
At 3 seconds a day I wouldn’t be stressed out by it
|
25 July 2023, 04:41 PM | #12 |
2024 SubLV41 Pledge Member
Join Date: Jul 2012
Real Name: Kat
Location: CA, USA
Watch: 126233 Wimbledon T
Posts: 7,136
|
|
25 July 2023, 04:51 PM | #13 |
2024 ROLEX SUBMARINER 41 Pledge Member
Join Date: Oct 2009
Real Name: RiCkY
Location: West Coast
Watch: 16520
Posts: 12,353
|
Buy an Apple Watch lol...JK man.
I see a 5513 and 1675 on your profile, are those running within COSC spec?
__________________
Passion for Mechanical Timepieces! IG: @crown_in_oyster_case (Make sure you're dealing with me, Meta Verified with Blue check mark!) ~Connecting people through my passion, one timepiece at a time~ |
25 July 2023, 04:51 PM | #14 |
"TRF" Member
Join Date: Jul 2019
Real Name: rd
Location: uk
Posts: 1,526
|
+3s for daily wear would be amazing. Every now and again you check your phone, pull the crown for a few seconds and it’s bang on again.
What’s your range though? Off the wrist, different positions, continuous wear etc? If you’re saying it’s +3s whatever then you definitely should leave that watch be. |
25 July 2023, 05:40 PM | #15 |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 53,024
|
Anyone sending in a watch to a RSC because its 3 seconds fast out of 86400 seconds in a day.Must either be sixpence short of a shilling or got todays deadly {CCTFESS}constant checking time for exact second syndrome, which seems to be getting more deadly each day.Remember this the escapement of a mechanical watch in 24 hours pushes the gears 432,000 times.Given the fact on the wrist the movement is constantly affected by the earth's gravity, metal expansion and contraction,mainspring power-reserve, temperature variations, subtle changes in lubrication and friction, shocks, and so on.The fact is that no mechanical watch made will keep 100% perfect time, very close yes but perfect no.
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
25 July 2023, 07:14 PM | #16 |
2024 Pledge Member
Join Date: Apr 2018
Real Name: Harry
Location: England
Posts: 10,626
|
I wouldn't notice it.
|
25 July 2023, 07:42 PM | #17 |
"TRF" Member
Join Date: Jul 2008
Location: Michigan
Posts: 224
|
Pretty good by most standards. If it’s fairly new it may change slightly once it settles in.
|
25 July 2023, 07:43 PM | #18 |
2024 SubLV41 Pledge Member
Join Date: Jul 2013
Real Name: Brian (TBone)
Location: canada
Watch: es make me smile
Posts: 77,742
|
|
25 July 2023, 08:57 PM | #19 |
2024 Pledge Member
Join Date: May 2008
Real Name: Steve
Location: Canada
Watch: 16753; Bellini Dia
Posts: 1,770
|
+3spd would bother me too, but not quite enough to send to RSC. I’d keep track of it though. +figures are quite a lot easier to correct than -figures, as someone earlier pointed out.
I’m told by an RSC trained chap that RSC generally prefer to have your watch gain rather than lose, but I’ve never had anything back from RSC (nor any new watch) gain — all of them have run very slightly slow. Having said that, I never take mine off, and I do know that many people correct their daytime error in the way they set down their watch at night… I just don’t have the time nor patience to be taking my watch off and on to correct deviation! Finally, I should mention that vintage pieces are (at least in my experience) significantly less accurate than newer watches — even when serviced by RSC. I have had one run well, but non of the other 1675/1675(3)s I’ve had over the years have even been close to COSC when returned by RSC (though others have had far more luck in that department than I have). Sent from my iPhone using Tapatalk
__________________
The trouble with having an open mind, of course, is that people will insist on coming along and trying to put things in it. SS Submariner no date 1992 (sold); SS GMT II 2007 (sold); SS GMT II C 2008 ('M' series) (sold); SS Sub C 2011 (sold); BB GMT 1971 (sold); Omega 50th GMT |
25 July 2023, 09:23 PM | #20 |
2024 SubLV41 Pledge Member
Join Date: Nov 2010
Location: North Carolina
Watch: Rolex/Others
Posts: 47,580
|
I would just enjoy the watch and not send it to the RSC. Issues can arise while it is being serviced and the time away does not justify the one second a day that it is out. If you are checking and resetting the watch daily you might not be giving it a chance to wear through and adjust as it goes. Set the time and let it go for a week and then check it again and see where you are. Also, my watches do better when I wear them as opposed to putting them on a winder or just winding them and setting them down.
|
25 July 2023, 10:18 PM | #21 |
"TRF" Member
Join Date: Mar 2016
Real Name: Oytun
Location: Here and there
Watch: 5712,116500 & Rest
Posts: 302
|
My 7 days old 116500 is also 2.5 - 3 sec fast per day. No need to send it, it's within specs use it
|
25 July 2023, 10:24 PM | #22 |
"TRF" Member
Join Date: Dec 2005
Location: ByDawns Earlylite
Watch: 16800
Posts: 3,580
|
3 seconds a Day??? My Invicta is only 2 seconds a Day.
|
25 July 2023, 10:27 PM | #23 |
"TRF" Member
Join Date: Jan 2017
Location: UK
Posts: 2,874
|
I'd never risk RSC (or anyone else) cracking the case open for +3 sec variance. As stated, it's within COSC.
Personally I only start to get bothered if a daily variance approaches double figures, as that can quickly add up. 10 secs a day is 5 mins a month, but you're looking at no more than 1.5 mins over the same period.
__________________
Rolex - 116710BLNR : 116610LN : 116622 : 116334 : 14060M (Plus - Glashutte Original, Breitling, Omega, IWC, Tag Heuer, Doxa, Sinn, Seiko, G-Shock + micros) |
25 July 2023, 10:30 PM | #24 |
"TRF" Member
Join Date: Sep 2016
Location: Here
Posts: 999
|
My guess is if it’s out of spec they’ll adjust it, but considering wearing habits and everything it’s no guarantee it’ll come back running better on your wrist.
For +3 I think it would be absolutely ridiculous to send it in myself. While the Rolex standard of +/-2 is great I wouldn’t consider sending something in unless it’s outside of cosc myself (-4/+6) Also, if this is a question about a specific watch actually running at that rate, how old is it? In my experience many movements slow a little when new, it seems to happen to just about every watch of mine. My Sub Date for example has slowed by a little over a second in the first month I’ve been wearing it but now appears to be holding steady. This happened to an Exp I, OP39, and previous gen Sub I had too…all slowed slightly in the first month or two. |
25 July 2023, 10:30 PM | #25 |
"TRF" Member
Join Date: Jan 2023
Location: Stockholm
Watch: Just a Daytona
Posts: 1,368
|
I'm now 9 weeks without my beloved watch: week 9 of a 10-week service.
I won't be sending it back if the second-hand is going anti-clockwise. |
25 July 2023, 10:40 PM | #26 |
"TRF" Member
Join Date: Feb 2019
Real Name: Mark
Location: Southern England
Watch: DJ41 SubC SMP mast
Posts: 1,674
|
Has anyone gotten pushback from an RSC to for being super picky on accuracy?
When my 3235 slipped to -4 spd having been no worse than +0.5 I took it in.
They asked me about winding and wearing and habits. They finally realised I wasn’t an idiot and knew what I was doing and no more problems. However, the mysterious mutes at RSC never said what the problem was. Sent from my iPhone using Tapatalk |
25 July 2023, 10:58 PM | #27 |
2024 SubLV41 Pledge Member
Join Date: Mar 2017
Location: United States
Watch: Rolex and Patek
Posts: 11,336
|
I would not notice it or care. Rolex brought all this fuss on themselves when they started marketing their products on ridiculously tight accuracy rates. You say its accurate to one second per decade, owners will come back if they are off two seconds per decade. It's the old adage of paying all that money, you should get what you paid for.
|
25 July 2023, 11:08 PM | #28 |
"TRF" Member
Join Date: Sep 2017
Location: Southeast
Watch: 214270
Posts: 2,733
|
Maybe look into quartz watches if extreme accuracy is your thing.
__________________
Never place your happiness on something you have or can physically acquire |
25 July 2023, 11:13 PM | #29 |
"TRF" Member
Join Date: Jan 2009
Real Name: Larry
Location: Kentucky
Watch: Yes
Posts: 34,996
|
No, not really.
The tech at my AD is super helpful in this regard. If I'm thinking something isn't right in the timing department, he will give it a going over with his expertise and equipment, and if he deems it out of spec, off it goes. If not, it stays. Which is yet another benefit to having a relationship with a great AD. |
25 July 2023, 11:28 PM | #30 |
"TRF" Member
Join Date: Jul 2014
Location: Midlands, UK
Posts: 4,971
|
+3 is crazy, sorry.
I've had some non rolex at +8 that I deal with. I had one run randomly at +12 and behave erratic, that was the only one I ever sent back because it wasn't consistent. As long as it is consistent and up to say +10 It wouldn't bother me until service. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.