My Rolex inner engrave to be askew a position

[wrp]

To be unusual ??????

[Colnago]

That should line up for sure......take it back to the AD and get it sorted out, you know it's there now and your eye will always go to it.....big shame....but I am sure it can be easily fixed

[MortgageGuy]

I dont get it...What are we looking at here? Thats it is just ever so slightly off center?

[Colnago]

Yeah...the corronet on the inner engraving should line up with the triangular 12 o'clock marker and be dead central on the case....each letter of the ROLEXROLEXROLEX should also line up with a minute marker...so of course it is misaligned all the way round, you just notice more with the corronet at 12.....look at the L and the E between 10 and 11 o'clock, they should be bang on a minute mark.....only a small detail but it would bug me as well, I have never seen it before....it is a QC thing in my opinion

[Rolexophile]

There was a recent thread on this issue not too long ago. This would drive me insane, get it fixed if it bothers you too, thanks for the pics.

[cmr]

send it to the rsc, i could not live with that.

[STEELINOX]

I can tell you right now that if you brought this into an AD let alone an RSC, the person is first going to say, "what?" Then your gonna have to explain it. The person may or may not see it and either give you the "raised eyebrow" or the "double take" when they finally DO see what the heck it is your talking about !

Then its going to sit there on the counter for a period as the person either says, we can realign it but its going to be after lunch, or they're gonna say, we have to send it to ROLEX to get it sorted.

Or their gonna go and talk to someone else about it in the back room/area and they're going to look in the security camera tv and point you out and chuckle at you, then get serious, have a bite of whatever' sitting next to their cold coffee, come back out and tellya, "are you a WISnut? Cause only a WISnut would bring something up like this?" And your gonna start to get a funny feeling, the kinda feeling that says, "maybe I better leave while I can before something bad happens to my 'precious' ".

And its going to happen because 89% of service peeps these days will do exactly just that. If your lucky you'll get somebody that knows their stuff and maybe JUST MAYBE your watch will not suffer impailment, superficial lug scratches, rehaute ring scratches, dial microfibres left behind or human hair follicle (yes, thats happened before). All because you "cant live with the ring being off center".

If you cant live with this and it makes you crazy, then there are other things in your life you need to have professionally looked into. I know I have issues and I got help, and I stopped buying 3 or 6 watches a year !

Is it really worth it, cause I dont think it is !

Thanks,
Randy

[Tools]

What Randy said........

[moviefreak]

You might get used to it.. at some point.. but on the other hand.. it should not be misaligned at all.
The problem as someone said is that once you know it is there, your eyes will instinctively go there 90% of the times you look at the time.. if that bothers you just send it to RSC and I am sure they will fix it right away.

[Brad21]

but on the other hand, putting that kind of money into a watch, if they are going to introduce this new inside engraving to help stop counterfeiting then they should make sure they all line up PERFECTLY before they leave the factory. i have seen fakes that line up perfectly, why shouldn't Rolex?

With seeing the number of fakes I see, I look for the inside engraving, if it has it I look to see if it lines up and if it doesn't my first thought it that the watch is fake.

I would be pissed if I bought a Rolex with inside engraving and it didn't match up with the money I have in the watch. Just my .02

[Noriki]

Go fix it, you properly can't sleep if you don't

[entropydave]

Sorry for your misalignment and yes - of course it should be fixed and I think that your attention to detail is totally acceptable for such an expensive and precise timepiece. This is one of the reasons we all buy Rolex - for the ultra high quality. It is, IMO, totally justified in having your AD realign it.
I am surprised that some of the posters here seem to think it is ok for you to leave it - personally it would bug the hell outta me and you will see everytime you look at it!

[STEELINOX]

Originally Posted by entropydave

Sorry for your misalignment and yes - of course it should be fixed and I think that your attention to detail is totally acceptable for such an expensive and precise timepiece. This is one of the reasons we all buy Rolex - for the ultra high quality. It is, IMO, totally justified in having your AD realign it.
I am surprised that some of the posters here seem to think it is ok for you to leave it - personally it would bug the hell outta me and you will see everytime you look at it!

then maybe you might want to try a loupe and look at how the luminova is filled in those gold applied hour surrounds !

[Rikki]

Only way to fix it is replace the case it's engraved on the inner bezel ring a part of the case. Good luck with that. Rikki

[STEELINOX]

Originally Posted by Rikki

Only way to fix it is replace the case it's engraved on the inner bezel ring a part of the case. Good luck with that. Rikki

I did not know that, guess he'll be puttin that puppy on the sales corner, as he " just cant live with that ! " !
And lets see, the Rehaute is skewed that should knock the selling price down, what, say another 20 percent off the 20 percent for it being 2nd hand, so a total of 40 percent off MSRP. Do you want cash, cause I have it right now !

Thanks,
Randy

[SDDS]

take it back and they will have fixed for u

[RLH]

It's your money, your watch. Do what you see fit. If it were mine, in my humble opinion, I would want it to be right.

[Dr.Brian]

The fact that it is misaligned would suggest that it is a separate part that can be replaced and/or repaired. I have seen a detailed exploded view of an oyster case. I seem to remember the rehaut being a separate part, but I am unable to locate the image to confirm my recollection. I would just live with it until it's first service. I had a tiny white fleck of dust on the dial of my IWC and lived with it for 4 years until it was serviced. I stopped noticing it after a few days. It, like your issue, was really not visible and I was worried about potential damage to the watch or dial during an unnecessary repair. It happens all the time. Especially if the "certified expert" in the back of the AD does it instead of the service center. If you must get it fixed now, send it, along with a detailed description of the problem, to the RSC of your choice directly.
Regards,
Brian

[Bukfenc]

This really tiny misalignment just makes that watch little special. It will have sratches and dents and everything with time, there is just no point to worry about it at all. To be honest I have never even looked at the rehaut, it is just a security thing,dont care how the engraving lines up...

[rajurama]

hahaa omg im just dreading to check if mines in the right angle or not! throwing all the loupes in my place...

[padi56]

Well all I can say is a blind man would like to see it, and if it did not have the Rolex Rolex Rolex on rehaut you would never know the difference. And afraid thats a solid part of the watch case, and would doubt if Rolex would supply a complete new watch case for such a very minor purely cosmetic 1mm alignment.

[Tools]

It's likely a result of what's called "tolerance stacking".... I doubt that the rehout is actually the problem..

It's where there is a fraction of a mm allowance for the indexing of the etching on athe rehaut; fraction of a mm deviation allowed for the painting of the marks on the dial;.... a fraction of a mm allowance for the dial mount on the movement; a fraction of a mm allowance for the fitment of the entire assembly into the case...

When all those tolerances are "stacked" in the same direction, you see a fraction of a mm difference only because you have a visual reference..

It can probably be corrected by disassembling the parts and re-assembling them with a bit of a twist the other way..


But, for you guys who are insisting that a Rolex is "expensive", or that somehow it is a perfect instrument..... You haven't been around a Rolex much....... They are robust, dependable, and good quality.. with an excellent reputation... but perfect or expensive.......

[DRAWTOOL]

All this begs the question: Is or is not the Rehaut a part of the case as per Rik or is it a seperate piece that can be re-installed?

[Tools]

Originally Posted by DRAWTOOL

All this begs the question: Is or is not the Rehaut a part of the case as per Rik or is it a seperate piece that can be re-installed?

No, it cannot be taken out and reinstalled...... except for the Seadweller and the DSSD.....

[DRAWTOOL]

Larry, does this mean that the RE is aligned with the center of the case and wrps
dial is out or the RE was indexed off a bit. I quess you are saying it could be both? I'm just glad mine aint got the engraving, I like them simple.

[Parachrom]

No one ever regretted buying quality and service. It is this attention to detail and quality and yes service that makes Rolex head and shouldedrs above the rest. They have a duty to put their product together with due carfe. They failed. it is now time to verify if buying rolex quality and service is merely a bunch of flowery words. With the coin tied up in these wtahces i would expect better from the AD. take it back get it fixed. It is a Rolex Quality Assurance issue, not the watch owner being too weeniek, let . aS FOR THOSAE WHO SAY SUCK IT UP, ITS NOT YOURE WATCH SO YOU REALY DONT HAVE A SAY. i WOULD WAGER MOST OF YOU WOULD SEND IT BACK IF IT WERE YOURS . DARN KEYboard is sticking again (not shouting).

Send it back let rolex do their thing and return it fixed.

[kkwn98]

Originally Posted by Parachrom

. aS FOR THOSAE WHO SAY SUCK IT UP, ITS NOT YOURE WATCH SO YOU REALY DONT HAVE A SAY. i WOULD WAGER MOST OF YOU WOULD SEND IT BACK IF IT WERE YOURS .

Well, the OP was asking for opinions, right? Those who say live with it have just as much say as you do.

[DRAWTOOL]

Originally Posted by Parachrom

No one ever regretted buying quality and service. It is this attention to detail and quality and yes service that makes Rolex head and shouldedrs above the rest. They have a duty to put their product together with due carfe. They failed. it is now time to verify if buying rolex quality and service is merely a bunch of flowery words. With the coin tied up in these wtahces i would expect better from the AD. take it back get it fixed. It is a Rolex Quality Assurance issue, not the watch owner being too weeniek, let . aS FOR THOSAE WHO SAY SUCK IT UP, ITS NOT YOURE WATCH SO YOU REALY DONT HAVE A SAY. i WOULD WAGER MOST OF YOU WOULD SEND IT BACK IF IT WERE YOURS . DARN KEYboard is sticking again (not shouting).

Send it back let rolex do their thing and return it fixed.

I agree.
I would consider it a factory "second" and would only have puchased it a low-low price.

[Numismatist]

Learned something new today:

The R O L E X aligns with the minute markers. Cool! Never noticed...Thanks

[DRAWTOOL]

Originally Posted by DRAWTOOL

I agree.
I would consider it a factory "second" and would only have puchased it a low-low price.

Sure you would, opportunist vulture! Then you would claim it's like an upside down plane onna stamp or a penny whats gotta Lincoln with a mohawk; a really
valuable one o' a kind Rolex!!